Best 10 Ft Ice Maker Hose

Product Description

Are you replacing a 5+ year-old ice maker connector hose or hooking up a new ice maker? This 15 ft. Braided Stainless Steel Ice Maker Connector from Certified Appliance Accessories is just what you need. It is corrosion-resistant inside and out plus bends freely for easier installation in cramped spaces.

From the Manufacturer

Ice Maker Connectors (15-Foot)

This is an Everflow Supplies lead free flexible ice maker supply line, made of stainless steel braided tube. In particular, it has a length of 120 inch and it has two 1/4 inch compression fittings on both ends. Furthermore, upc, nsf and csa approved the part for meeting the lead free nsf 61-g standards.

Product Description

The Eastman 48389 Appliance Connector Supply Line features stainless steel braided body and has a 1/4-inch x 1/4-inch connection. It meets AB1953 as well as CUPC standards.

Eastman’s 10 ft. Stainless Steel Ice Maker Connector is the standard in ice maker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.

From the Manufacturer

Eastman’s 10′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.

Product Description

This Fluidmaster Braided Stainless Steel 10-Foot (120 in) Length Ice Maker Supply Line connects your Icemaker to the wall water supply. Fluidmaster Icemaker water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts. A proven supply line that won’t crease or tangle even in the tightest of corners. Durability and ease-of-use were at the forefront of this design, with the nickel plated brass hex nuts for easy to grip tightening. A 1/4-Inch female compression thread by 1/4-Inch female compression thread connector with an efficient flow rate. Code approved with a 5 year warranty.

From the Manufacturer

Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.

Product Description

American Standard Cadet-3 Elongated Flowise 1.28 gpf Toilet, linen 2833.128.222. The American Standard Cadet-3 toilet is a two-piece toilet constructed of vitreous china, a type of ceramic fired at high temperature to form a non-porous body coated with a ceramic glaze which is fused to the body, and features the Cadet-3 flushing system, which has a 3-Inch flush valve with a chemical resistant flapper. The Ever Clean antimicrobial surface inhibits the growth of stain and odor causing bacteria, mold, and mildew. It has a 10-Inch rough-in, and comes complete with coupling components and tank trim, including a chrome-plated trip lever. Featuring an elongated siphon action jetted bowl, with a generous 9-by-8-Inch water surface area, and it comes with two color-matched bolt caps. It has a fully glazed 2-1/8-Inch. It features the new Speed Connect tank-to-bowl coupling system for quick assembly and the new sanitary dam on the bowl with four point tank stabilization. Toilet seat sold separately.

From the Manufacturer

American Standard Cadet-3 Elongated Flowise 1.28 gpf Toilet, linen 2833.128.222. The American Standard Cadet-3 toilet is a two-piece toilet constructed of vitreous china, a type of ceramic fired at high temperature to form a non-porous body coated with a ceramic glaze which is fused to the body, and features the Cadet-3 flushing system, which has a 3-Inch flush valve with a chemical resistant flapper. The Ever Clean antimicrobial surface inhibits the growth of stain and odor causing bacteria, mold, and mildew. It has a 10-Inch rough-in, and comes complete with coupling components and tank trim, including a chrome-plated trip lever. Featuring an elongated siphon action jetted bowl, with a generous 9-by-8-Inch water surface area, and it comes with two color-matched bolt caps. It has a fully glazed 2-1/8-Inch. It features the new Speed Connect tank-to-bowl coupling system for quick assembly and the new sanitary dam on the bowl with four point tank stabilization. Toilet seat sold separately.

Product Description

The Eastman 41036 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 10-feet long. The supply line features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping making it long-lasting. It consists of nickel-plated brass nuts which ensure secure fitting.
Eastman’s 10′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.

From the Manufacturer

Eastman’s 10′ Stainless Steel Icemaker Connector is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.

Product Description

The Eastman 48380 Ice maker connector has a 1/4-inch comp x 1/4-inch comp connection and is 10-feet long. The supply line features a PVC core that is designed to prevent kinking and crimping making it long-lasting. It consists of nickel-plated brass nuts which ensure secure fitting.
Eastman’s 10′ Icemaker Reinforced PVC Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
CAUTION: Improper installation can cause leaks with water damage.

From the Manufacturer

Eastman’s 10′ Icemaker Reinforced PVC Supply Line is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.

Conclusion

By our suggestions above, we hope that you can found 10 ft ice maker hose for you.Please don’t forget to share your experience by comment in this post. Thank you!