Top 10 2 Inch Union Pvc

This Valterra 200-CU20 union check valve is made of clear schedule 40 PVC (polyvinyl chloride) for strength and resistance to corrosion and mild chemicals. Its EPDM (ethylene propylene diene monomer) seal resists degradation caused by water and oils, and the swing/spring construction of this valve makes it possible to install it in any position. It has a 2″ slip connection at each end, which must be fastened with glue, a maximum pressure rating of 150 pounds per square inch (psi), and a spring tension of 1/2 lb. This check valve is suitable for use with landscape and irrigation, pool and spa, aquaculture, and general purpose applications.

Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, closing when flow reverses or stops. Two common types of check valves are ball cone valves and swing check valves. A ball cone valve utilizes a spring-loaded ball seated against a cone-shaped interior surface to stop the flow of fluid in a forward direction, and a swing check valve has a movable disc on a hinge to block reverse flow. Check valves are rated by their cracking pressure (the minimum upstream pressure required for the valve to operate), and they are used in various water, gas, air, and steam lines.

Valterra Products manufactures and distributes valves, hoses, sewer systems, and pool and spa products. The company, founded in 1981, is headquartered in Mission Hills, CA.

This Spears union pipe fitting with a Buna-N O-ring is made of schedule 40 PVC and has socket end connections. This union fitting has three pieces and includes a threaded connection that can be screwed or unscrewed to connect or disconnect pipes more easily than with a coupling. It has female socket connections for sliding over the ends of unthreaded male pipes or fittings. The socket end connects to pipes with a smooth bore for enhanced flow and has a buna-nitrile (also called Buna-N) O-ring seal. Buna-nitrile has high tensile strength; abrasion, tear, and compression set resistance; and compatibility with a variety of fluids such as petroleum and hydrocarbons. This schedule 40 (standard wall) fitting is made of PVC (polyvinyl chloride) for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings. This fitting provides superior flow to metal because of its smooth interior finish, which reduces friction and inhibits buildup of materials. It has a maximum operating pressure rating of 150 pounds per square inch (psi) at 73 degrees F. This fitting complies with National Sanitation Foundation International (NSF)/American National Standards Institute (ANSI) 61 Annex G, NSF/ANSI 372, and conforms with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January 2014. This union pipe fitting is suitable for use in cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications.

Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.

This Spears schedule 40 PVC union fitting has female NPT threaded openings on both ends, and is suitable for connecting two pipes. The National Pipe Taper (NPT) threads create a tighter seal than straight threads. The fitting has three pieces and includes a threaded connection that can be screwed or unscrewed to connect or disconnect pipes more easily than with couplings. It is made of white PVC (polyvinyl chloride) for chemical and corrosion resistance, high strength, and less weight than fittings made from metal, and has an EPDM (ethylene propylene diene monomer) seal for resistance to oil, water, and some solvents. It is compatible with schedule 40 PVC pipes and fittings and is suitable for cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings. The fitting has a maximum operating temperature of 140 degrees F, and a maximum pressure rating of 150 pounds per square inch (psi) at 73 degrees F. It meets ASTM International D1784 and D2466 standards for quality assurance, and is certified by National Sanitation Foundation International (NSF) for potable water service. This schedule 40 PVC union fitting is suitable for connecting pipes for conveying drinking water, waste water, chemicals, and other liquids in a range of industries.

Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.