Best 20 Micron Sandpaper 3M

The superior flexibility of the non-woven, tear-resistant synthetic backing on this Polishing Paper allows for fast and easy finishing and polishing of numerous materials, even on highly contoured surfaces. They are excellent for finishing jewelry and precious metals. They will remove scratches and restores transparency to acrylic and polycarbonate windows on buses, aircraft and trains. They are ideal for plastic, polyurethanes, fiberglass, solid surface composites and wood. Their precision micron grading provides a uniform, consistent finish which shortens hand-sanding and buffing time, reduces finishing steps and saves time. They can be easily cut into strips. They can be used wet or dry. These sheets will not load or clog easily, and can be washed with soap and water. Polishing paper available with micron graded silicon carbide or aluminum oxide minerals. Sheets are color-coded for easy identification. Available in the following grades: 30 micron (600 grit) Silicon Carbide, Army Green, 15 micron (1200 grit) Silicon Carbide, Grey, 9 micron (1800 grit) Aluminum Oxide, Sky Blue, 3 micron (8000 grit) Aluminum Oxide, Pink, 2 micron (10,000 grit) Aluminum Oxide, Aqua Blue and 1 micron (14,000 grit) Aluminum Oxide, Ivory. All sheets are Non PSA (Pressure Sensitive Adhesive). All sheets are 8-1/2 inches x 11 inches.

3M (TM) manufacturers lapping film using a wide range of abrasive materials utilizing numerous abrasives, backing materials and bonding agents. These precision microfinishing lapping sheets were developed for the electronics industry but can be used to flat lap or polish just about anything. This lapping film contains carefully graded aluminum oxide particles that are electrostatically coated onto a high-strength, tear-resistant polyester film backing. This fast cutting, water resistant abrasive provides a precise, consistent, close tolerance cut rate throughout the life of the product. Sheets are available in a wide range of precise micron grades to meet any sharpening or polishing need. They can be used to put a wicked sharp edge on wood chisels, plane irons, carving tools or knives. Can also be used to put a fine polish on jewelry or gemstones. These sheets are Non-PSA (Pressure Sensitive Adhesive) backed. They have a 3 mil high-strength polyester film backing is waterproof and less likely to tear than traditional wet or dry sandpaper. They are available in the following grades/grits: 0.05 micron (off-white) or 500,000 grit, 0.3 micron (white) or 60,000 grit, 1 micron (light green) or 14,000 grit, 3 micron (pink) or 8,000 grit, 5 micron (brown) or 4500 grit, 9 micron (light blue) or 1800 grit, 12 micron (yellow) or 1200 grit, 30 micron (green) or 600 grit, 40 micron (blue) or 300 and 60 micron (ivory) or 250 grit. These sheets are not marked so using the above grit/color key will be the only accurate way to identify.

3Mmanufacturers lapping film using a wide range of abrasive materials utilizing numerous abrasives, backing materials and bonding agents. These precision microfinishing lapping sheets were developed for the electronics industry but can be used to flat lap or polish just about anything. This lapping film contains carefully graded aluminum oxide particles that are electrostatically coated onto a high-strength, tear-resistant polyester film backing. This fast cutting, water resistant abrasive provides a precise, consistent, close tolerance cut rate throughout the life of the product. Sheets are available in a wide range of precise micron grades to meet any sharpening or polishing need. They can be used to put a wicked sharp edge on wood chisels, plane irons, carving tools or knives. Can also be used to put a fine polish on jewelry or gemstones. These sheets are Non-PSA (Pressure Sensitive Adhesive) backed. They have a 3 mil high-strength polyester film backing is waterproof and less likely to tear than traditional wet or dry sandpaper. They are available in the following grades/grits: 0.05 micron (off-white) or 500,000 grit, 0.3 micron (white) or 60,000 grit, 1 micron (light green) or 14,000 grit, 3 micron (pink) or 8,000 grit, 5 micron (brown) or 4500 grit, 9 micron (light blue) or 1800 grit, 12 micron (yellow) or 1200 grit, 30 micron (green) or 600 grit, 40 micron (blue) or 300 and 60 micron (ivory) or 250 grit. These sheets are not marked so using the above grit/color key will be the only accurate way to identify. In the finer Non-PSA grits, it can be difficult to differentiate the abrasive side from the backing. The abrasive side will always have a matte finish, where the film backing side will be glossy.

ADVcer 2000 to 10000 Assorted Grit Sandpaper for Wood Furniture Finishing, Metal Sanding and Automotive Polishing, Dry or Wet Sanding, 9 x 11 Inch, 16-Sheet

✅ Most Popular Use
– Wooden Furniture Finishing
– Metal Sanding
– Automotive Polishing
– Dry or Wet Sanding
– Wood Turing Finishing
– DIY Hobbies
– Removing Abrasions or Blemishes on Walls
– Removing Scuffs on Baseboards
– Smoothing Models and Toys Burr
– Refinishing Handrails

✅ Specification
– Use Purpose: Wet or Dry Grinding
– Material: Silicon Carbide
– Craftsmanship: Waterproof, Electro Coated
– Grits: 2000 / 2500 / 3000 / 4000 / 5000 / 7000 / 8000 / 10000
– Abrading Paper Quantity: 16 Sheets (2 pieces each of 8 different grits)
– Abrasive Paper Size (L x W): 9 x 11 inch
– Package Weight: about 5.044 ounces

✅ Package Included
– 1x Clear Zip Lock Storage Bag
– 2x 2000 Grit Sandpaper
– 2x 2500 Grit Sandpaper
– 2x 3000 Grit Sandpaper
– 2x 4000 Grit Sandpaper
– 2x 5000 Grit Sandpaper
– 2x 7000 Grit Sandpaper
– 2x 8000 Grit Sandpaper
– 2x 10000 Grit Sandpaper

Have any concerns on this product?
Just post your question to the Q&A part on this page. We are pleasure to answer every question for you anytime. : )

This lapping film is made in the USA by 3M (TM). These microfinishing lapping sheets were developed for industrial applications and can be used to flat lap or polish just about anything. This lapping film contains carefully graded aluminum oxide particles that are electrostatically coated onto a high strength polyester film backing. This fast cutting, water resistant abrasive provides precise, consistent, close tolerance finishes, and are available in a wide range of precise micron grades to meet any sharpening or polishing need. They can be affixed to a hard flat surface (usually 1/4 inch glass) and used to get a scary sharp edge on wood chisels or plane irons. They can be wrapped around contoured sticks and used to sharpen carving tools. They can put a wicked sharp edge on all kinds of knives. They can also be used to put a fine polish on jewelry or gem stones. These are PSA and have pressure sensitive backing. They have a 3 mil high-strength polyester film backing which is less likely to tear than traditional wet or dry sandpaper. The sheets are not marked so using their color is the only accurate way to identify them. These Aluminum Oxide (AO) sheets come in the following grades: 1) 0.3 micron (white) or 60.000 grit 2) 1 micron (light green) or 14,000 grit 3) 3 micron (pink) or 8,000 grit 4) 9 micron (light blue) or 1800 grit 5) 12 micron (yellow) or 1200 grit 6) 30 micron (green) or 600 grit and 7) 40 micron (blue) or 300 grit. The sheets are not marked so using their color is the only accurate way to identify. In the finer grits, it can be difficult to differentiate the abrasive side from the backing. The abrasive side will always have a matte finish, where the film backing side will be glossy.

Product Description

3M Wetordry Sandpaper 9083NA-20, 9-Inch x 11-Inch (228 mm x 279 mm) 1000-grit, Open Stock. WetorDry abrasives are specially designed for wet or dry sanding between coats of varnish, lacquer, paint and otherfinishes. Wetordry sandpaper is made with silicon carbide abrasive, a sharp synthetic mineral that cuts fast and smooth, and it can also be used to repair surface defects. It can be used with water or cutting oil to reduce clogging and extend abrasive life. The Wetordry sheets are offered on two weights of waterproof paper to suit your specific sanding needs: flexible A weight backing for contour sanding and durable Cweight backing for improved stock removal and leveling general surfaces.

From the Manufacturer

3M Wetordry Sandpaper 9083NA-20, 9-Inch x 11-Inch (228 mm x 279 mm) 1000-grit, Open Stock. WetorDry abrasives are specially designed for wet or dry sanding between coats of varnish, lacquer, paint and otherfinishes. Wetordry sandpaper is made with silicon carbide abrasive, a sharp synthetic mineral that cuts fast and smooth, and it can also be used to repair surface defects. It can be used with water or cutting oil to reduce clogging and extend abrasive life. The Wetordry sheets are offered on two weights of waterproof paper to suit your specific sanding needs: flexible A weight backing for contour sanding and durable Cweight backing for improved stock removal and leveling general surfaces.

3M advanced sandpaper is now better than ever, thanks to our no-slip grip backing that is applied to the back of our 3M pro grade sandpaper. No-slip grip backing provides longer sheet life – 7 times longer than conventional sandpaper. For the best sanding results, sand with the grain of the wood and work through a sequence of grits, from coarse to ultra fine, skipping no more than one grit between sandpaper.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy 20 micron sandpaper 3m, eg:

• What are Top 10 20 micron sandpaper 3m for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 20 micron sandpaper 3m to buy?
• What are Top Rated 20 micron sandpaper 3m to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 20 micron sandpaper 3m?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 20 micron sandpaper 3m.
• Before deciding to buy any 20 micron sandpaper 3m, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose 20 micron sandpaper 3m and What you should consider when buying the 20 micron sandpaper 3m and Where to Buy or Purchase the 20 micron sandpaper 3m. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 20 micron sandpaper 3m of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 20 micron sandpaper 3m.

Conclusion

By our suggestions above, we hope that you can found 20 micron sandpaper 3m for you.Please don’t forget to share your experience by comment in this post. Thank you!