owneaster 
Nowadays, there are so many products of 30mm cooling fan 12v in the market and you are wondering to choose a best one. You have searched for 30mm cooling fan 12v in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 30mm cooling fan 12v which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Usongshine 3D Printer Cooling Fan 30 x 30 x10mm 3010 DC 12V Cooling Fan with 2Pin Wire, 2 Packs of Mounting Screws (12V Pack of 2)
- Low noise: less than 20 dBA, size: 30 * 30 * 10mm, High quality: Allow your machine to cool down normally.
- Wide range of applications: Suitable for hot end cooling, printers or other cooling requirements, such as: B. small communication devices for heat radiation
- PC CPU server, cooling capacity, etc.
- Interface type: JST-XHP-2, cable length: approx. 30 cm.
- Package Include: 2pcs 2Pin DC Cooling Fan and 2 packs of mounting screws.
- Excellent service: All Usongshine fans have 12 months. In case of problems, we offer a full refund within 360 days.
Wathai 30mm x 10mm 12V Small DC Brushless Cooling Fan
- 2 Piece fan and mounting screws & nuts
- Rated Voltage:12V 0.05A
- Speed: 9000RPM
- Air flow: 3.79CFM
- Noise:22dBA
- Connecter: PH2.0-2Pin
- Cable Length: 15cm Or 5.9 inches
- Bearing type: Sleeve Bearing
- Life: 35000 hours
- Dimension: 30mm(L) x 30mm(W) x 10mm(H) / 1.18×1.18×0.39 in. per fan
Package include: 2 Piece fan and mounting screws & nuts
Size:30x30x10mm
Rated Voltage:12V 0.05A
Bearing type: Sleeve Bearing
Speed: 9000RPM
Air flow: 3.79CFM
Noise:22dBA
Connecter: PH2.0-2Pin
Cable Length: 15cm Or 5.9 inches
Life: 35000 hours
Weight:8g/pcs or 0.28oz
Similar items with 4 stars and above
GDSTIME 3007 30mm x 30mm x7mm 12V DC Brushless Blower Cooling Fan
- Dimension of outer the frame is 30mm(L) x 30mm(W) x 7mm(H) / The size of fan in inch is 1.18in(L) x 1.18in(W) x 0.28in(H)
- Connector:PH2.0-2Pin
- Lead wire: Positive is Red wire
- Negative is Black wire.
- Rated Voltage: DC 12V
- Rated Current: 0.1Amp
- Rated Speed: 8500 RPM
- Air flow: 9.5CFM
- Noise: 24dBA
- Power: 0.7Watt.
- Bearing Type: Sleeve Bearing
- Life: working up to 35000h at 25 degrees.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
Dorhea 30x30x10mm 12V Fan DC Brushless Cooling Fan 3010 DC 12V for DIY 3D Printer Extruder Hotend V6 V5 CPU Arduino Humidifier 2Pin (4 PCS)
- High quality mini brushless 30 x 30 x 10mm DC 12V fan, 3010 fan cooling cooler.
- DC Brushless Cooling Fan, Rated Voltage: DC 12V, Current: 0.15A
- Noise: 24DBA.
- Connecter: 2 terminal connector with 2pin-ph2.5.
- Compact motor design for computer case 30mm 3d Printer fan used in humidifier, aromatherapy and other small appliances series
- small heat radiating communication equipment
- military equipment
- intelligent industrial control equipment plate cooling heat, high precision medical equipment cooling
- pc cpu server cooling dissipation
- electronic cooling fans and so on.
- Plastic construction 5 blade fan. Speed: 9000 + -10% RPM
- Wind Speed: 2.5M/S, Wind Volume: 2.8CFM
Specifications:
Size:30x30x10mm
Rated Voltage:DC12V
Speed: 10000RPM
Air flow: 3.95CFM
Noise:26dBA
Connector: PH2.0-2Pin
Life: 35000 hours
Package Include:
4X12V 2Pin DC Cooling Fan
Similar items with 4 stars and above
Fugetek 12V DC Brushless Blower Cooling Fan, HT-07530D12, 75x75x30mm, 2pin, Dual Ball Bearing, Computer Fan, Multi Use, Black, US Support
- This fan is made of special and premium materials for the Fugetek FG-637, 647 and FG-857 projectors. It is high temperature resistant and extremely durable.
- Dual Ball bearing. Genuine NSK or NMB balls made in Japan. Guaranteed to continuously run 50,000 hours under normal temperature. Speed: 3500 RPM
- Rated Voltage: 12 V
- Noise Level : 42 dba
- Dimensions:: 75x75x30mm
- 2.95×2.95×1.18″
- Lead wire:UL Type (+):Red (-):Black. This is a two wire blower.
Universal 12v DC Brushless Blower Cooling Fan – Dual Ball Bearing
General Specifications:
Frame: Plastic 94V-0
Impeller: Plastic 94V-0
Lead wire: UL Type (+):Red (-):Black
Operation Temperature: -10℃~ 70℃
Motor Protection: Impedance Protected
Reverse Polarity Protected
Model No: HT 07530
Rated Voltage (VDC): 12
Speed Type: H, M, L
Rated Current (A): 0.30, 0.16, 0.12
Rated Speed _RPM): 3500, 3000, 2500
Air Flow (CFM): 12.02, 9.40, 7.81
Air Pressure (mmAg): 16.81, 9.30, 5.96
Customer Support from our Houston,Tx office. If you have any questions, feel free to call us.
BIGTREETECH Ball Bearing 3010 12V 2Pin 3CM 30mm 30x30x10mm Micro DC Mini Brushless Cooler Cooling Fan (4pcs)
※ General Specification
(Part No.):3010
(Outline Dimension):30*30*10MM
(Rated Voltage):DC12V
(Voltage Range):5V-12V
(Starting Voltage):12V
(Rated Current):0.0.5A+5%
(Rated Power Consumption):0.6W
(Speed):8000±5%RPM
(Min. Airvolume Fiow):3.1CFM
(Noise Level):23db-A
(Operating Temp.Range):
(Temperature): 0℃ ～ 90℃
(Humidity): 35% ～ 85%
(Storge Temp.Range)
(Temperature): 0℃ ～ 70℃
(Humidity): 35% ～ 80%
HUNTERFAN HF- 7530 12V 75mm x 30mm 2.8Watt DC Cooling Blower Fan with 2 Pin Terninal (75x75x30mm)
- Dimensions: 75x75x30mm | 2.95 x 2.95 x 1.15inch
- Speed:3000RPM | Airflow: 10.5CFM | Noise: 37dBA | Bearing: Dual Ball
- Power Connector: XH2.54 – 2Pin | Rotation | Direction: Counter-clockwise.
- The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation.
- Highest Quality and Satisfaction Guaranteed. if you have any questions, Pls contact us and we will find a solution for you.
Highest Quality and Satisfaction Guaranteed.
if you have any questions, Pls contact us and we will find a solution for you.
GDSTIME 75mm x 30mm 7530 DC 12 Volt Brushless Turbo Blower Cooling Fan
- Package include: 1 piece fan include mounting screws & nuts.
- Dimensions: 75mm(L) x 73mm(W) x 30mm(H) / 2.95” x2.87”x1.18”(L*W*H)
- Rated Voltage: DC 12V
- Rated Current: 0.26 Amp
- Speed:3200RPM
- Air flow:13.5 CFM
- Noise: 37 dBA
- The wide of inlet is 48mm / 1.9in； The Length of outlet is 36.5mm / 1.44in ±0.3
- The Wide of outlet is 24.7mm / 0.97in ±0.3
- Connector:XH2.54-2Pin
- Lead wire:UL Type (+): Red
- (-): Black. This is a two wire dc blower fan.
GDSTIME 75x75x30mm 75mm Dual Ball Bearing Computer 12V DC Brushless Turbo Blower Cooling Fan
- Package include: 1 piece fan include mounting screws & nuts.
- Dimensions: 75mm(L) x 73mm(W) x 30mm(H) / 2.95” x2.87”x1.18”(L*W*H)
- Rated Voltage: DC 12V
- Rated Current: 0.3 Amp
- Rated Speed: 3500 RPM
- Air flow: 14.1CFM
- Noise:39.4dBA
- The wide of inlet is 48mm / 1.9in； The Length of outlet is 36.5mm / 1.44in ±0.3
- The Wide of outlet is 24.7mm / 0.97in ±0.3
- Lead wire:UL Type (+): Red
- (-): Black. This is a two wire blower.
Package include: 1 piece fan include mounting screws & nuts.
Dimensions: 75x75x30mm
Connector:XH2.54-2P
Rated Voltage: DC:12V
Rated Current: 0.3 Amp
Rated Speed: 3500 RPM
Air flow: 14.1 CFM
Noise: 39.4dBA
Bearing Type: Dual Ball
Life: 50000 hours at 25 degrees
Cable Lenght: 25cm
Weight: 66 g
KINGPRINT DC 12V 40x40x10mm Silent Brushless Cooling Fan for 3D Printer (Pack of 2pcs)
Conclusion
By our suggestions above, we hope that you can found 30mm cooling fan 12v for you.Please don’t forget to share your experience by comment in this post. Thank you!
