owneaster 
Nowadays, there are so many products of water to cooling heat exchanger in the market and you are wondering to choose a best one. You have searched for water to cooling heat exchanger in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water to cooling heat exchanger which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Clyxgs Water Cooling Radiator, 8 Pipe Aluminum Heat Exchanger Radiator with Fan for PC CPU Computer Water Cool System DC12V 80mm
- ✅ Product Name: Water Cooling Radiator
- Size: 105 x 80 x 37 mm / 4.1” x 3.1” x 1.5”(L*W*H).
- ✅ Made of pure aluminum fins with good heat dissipation.
- ✅ Using the black oxidation paint to increase the thermal efficiency.
- ✅ High speed fan configuration, 12V safe voltage with high security standards and ensure the safety of the fan.
- ✅ Applicable to computer CPU, industrial variable frequency drives, VGA water cooling ,laser head cooling, and air conditioning evaporator.
Product Name: Water Cooling Radiator
Product Specifications:
– Fitting Thread: G1/4 Inch;
– Fin density: 18 lines per inch
– Color: Black; Product Weight: 106g
– Type: Water Cooling; Material: Aluminum
– Mouth: 9.5 (D) mm; Model Number: 80mm;
– Longer Screw Size: 31 x 3 mm / 1.2” x 0.12”(L*D);
– Size: 105 x 80 x 37 mm / 4.1” x 3.1” x 1.5”(L*W*H);
– Tube Quantity: 8; Fit ID Tube Inner Diameter: 8 -12mm / 0.3” – 0.5”
– Fit ID Tube Outer Diameter: 9.5 mm / 0.37”; Shorter Screw Size: 7 x 3 mm / 0.3” x 0.12”(L*D)
Product Features:
– Pure aluminum fins
– Parts brazing seal as a whole
– Surface treatment: Dark paint
– Joint: disposable stainless steel-band
– The sealing process: vacuum aluminum brazing
– Item Type: Computer Radiator Water Cooling Cooler; Material: Metal
– Can be installed 80mm fan, mounting hole size: 69.5（D）×69.5（W）mm
✔Optimized for high performance at low cost,No weak welds nor leakage.
✔Suitable for computer CPU cooling, industrial frequency conversion driver, laser head cooling, air conditioning evaporator and industrial control cabinet cooling.
Package Included:
1 x Aluminum Heat Exchanger High speed fan
NOTE: Screw holes below is channel pipe, so make sure not to use long screw, will top leaking.
Similar items with 4 stars and above
AGPtek® 12 Pipe Aluminum Heat Exchanger Radiator for PC CPU CO2 Laser Water Cool System Computer
- AGPTEK well male durable Aluminum Heat Exchanger Radiator using integrated forging process
- Applicable to computer CPU,industrial variable frequency drives, VGA water cooling ,laser head cooling, and air conditioning evaporator.
- Using the black oxidation paint to increase the thermal efficiency
- No weak welds nor glue.
- Size:main size: 6.22inchx4.72inchx1.18inch(158mm x 120mm x 30mm)
- For Pipe Diameter: 9.5MM (3/8 inch)
Yoidesu CPU Cooling Heat Exchanger Water Pump Tank 50mm Diameter Cylinder Water Cooling Tank G1/4 Thread Computer DIY Cylinder Water Tank for CPU Cooling Multiple Length(300mm)
- Water tank – With its full open design and thread tighten up and down structure, It’s easy to dissemble and clean the water cooling system.
- Imported CNC machining and high quality POM material process, makes the tank safe and durable to use. POM material features good temperature resistance.
- G1/4 Thread – The upper and lower interfaces are all equipped with the imperial G1/4 standard threaded interface, which is compatible with all common standard pagodas on the market.
- Quick-twist joint and high-strength material, no need to worry about deformation and cracking of interface and thread.
- 50mm diameter tube enables this cylinder water tank to bear more water for faster heat dissipation.
Features:
1.Water tank – With its full open design and thread tighten up and down structure, It’s easy to dissemble and clean the water cooling system.
2.Imported CNC machining and high quality POM material process, makes the tank safe and durable to use.
3.POM material features good temperature resistance.
4.G1/4 Thread – The upper and lower interfaces are all equipped with the imperial G1/4 standard threaded interface, which is compatible with all common standard pagodas on the market.
5.Quick-twist joint and high-strength material, no need to worry about deformation and cracking of interface and thread.
6.50mm diameter tube enables this cylinder water tank to bear more water for faster heat dissipation.
Specification:
Type: DIY Cylinder Water Cooling Tank Kit
Body material: Pmma
Shell material: Pom high temperature resistant rubber
Outer diameter: 50mm
Weight: Approx. 352g
Length: Approx. 190mm / 240mm / 300mm / 400mm ±1mm
Package list:
1 * Tank
2 * Plastic Brackets
2 * Metal L-shaped Brackets
6 * Installation Screws
Mophorn Plate Heat Exchanger 5 x 12 Inch 20 Plate Water to Water Heat Exchanger Stainless Steel Heat Exchanger 1 Inch MPT Ports 80,000 BTU (20 Plate)
- High Quality:the plate heat exchanger are made of 316 Stainless Steel and are UL listed
- Plate heat exchanger BTU rating: 80,000 (Commonly used for heating domestic water for 4 to 6 people) Btu
- Max pressure :652 lbs per sq in
- Test pressure:971 lbs per sq in
- Volume per channel (L): 0.05
- Exchange area sq ft:417 per plate
- Max Temperature: 437F
- High-efficiency Hookup:Threader make a easy, quick, flexible hookup.highly conductive and super-thin stainless steel plates make good performance and economy for heating exchanger and cooling
- Multifunctional Usage:Perfect for the lab, beer brewing, straight vegetable oil conversion, radiant floor heating, wood-burning furnaces, refrigerants, air conditioning and solar water heating
The brazed plate heat exchanger has a simple operating principle. Based on the plate and nozzle orientation, each fluid passes through alternative channels within the heat exchanger. An extremely high heat transfer coefficient is attained due to the flow characteristics in each channel. A specially design and test result in higher heat transfer and reduction of the amount of deposits inside the unit.
Our Water To Water Brazed Plate Heat Exchangers are used for transferring heat from one hot water source to another without mixing the two different water sources. They are good for preheating water to water heaters and for transferring heat from an outdoor furnace or solar system to an indoor boiler. Other uses for them include transferring heat from hot oil or cooling milk off a milk pipeline.
Superiority
“Herring bone” plate pattern increases heat transfer area and improves efficiency.
Compact design allows for more flexibility in installation.
Heavy-gauge top and bottom plates protect the unit from corrosion and accidental damage.
Applications
The 20-plate brazed plate heat exchangers are ideal for using with outdoor wood furnaces/boilers, radiant floor heating projects, plumbing systems, snowmelt systems, swimming pools, domestic water applications, HVAC and refrigeration systems, solar systems, oil cooling and other liquid to liquid heat transfer applications.
Notice
1. Not to be used for transferring steam!
2. Vertical installation is recommended to minimize sediment build-up and reduce maintenance.
3. For any type of project, installing a Y-strainer at the heat exchanger inlet is recommended to reduce fouling and extend the lifespan of the unit.
4. Connect the pipes in a manner where liquids move in a counter-flow direction -this will maximize the heat transfer.
Coil 50’000 BTU, 115’000 BTU, 140’000 BTU, 200’000 BTU Water to Air Heat Exchanger for Heating and Cooling (18 x 18” 115’000 BTU)
The best water to air heat exchanger for heating and cooling.
- Weight 16 lb, Width 23”, Depth 3½”, Height 18”.
- 1″ Sweat connections and manifold.
- 3 Rows of 3/8” silver brazed copper tubing type L.
- 54 Copper passes through 9 circuits of 6 passes each.
- Aluminum hydrophilic wave bluefin (13 fins/inch).
- Galvanized steel frame.
- Rate up to 200 PSI.
- Lifetime Warranty.
Similar items with 4 stars and above
Bewinner PC Heat Exchanger,45mm Double Core 24-Pipe Water Cooling Radiator,2-Layer 24-Pipe Design Ensure CPU Stability and Smoothness,Easy to Install,Wide Compatibility
- 2-layer 24-pipe design makes the PC heat exchanger enable to accelerate water flow for faster heat dissipation, which can ensure CPU stability and smoothness.
- Safe operation can be finished in the following way. You shall use a built-in water separator to keep the water mixed and keep the water away from the equipment for safe operation.
- Durable, copper fins and brass tanks withstand long periods of continuous heat dissipation.
- Easy to install, this PC water-cooled tube can be easily installed with screws for its simple installation.
- Wide compatibility helps water cooler tubes suitable for computer water cooling systems, beauty apparatus, industrial instruments and more.
Specification:
Item Type: Water cooling radiator
Model: SR-120SL
Uses: Computer water cooling, beauty apparatus, industrial instruments
Interface: G1/4 thread
Material: Aluminum
Composition: Double flat tube, a total of 24
Package List:
1 x Water Cooling Radiator1Pack x Screw
Titanium 50’000 BTU, 100’000 BTU, 180’000 BTU Water to Water Heat Exchanger for Heating and Cooling (50’000 BTU)
Everlasting corrosion free saline or chlorine water to water heat exchanger for heating and cooling.
Application: Pool, spa, saline geothermal ground loop and more
- Inner corrugated tubing: Titanium grade 1
- Connections: MPT >½”
- Pressure rating: 200 psi
- Shell: PPR injection mold
- Connections: 1 ½” PVC Union Connector
- Pressure rating: 75 psi
- Design to prevent freezing
- Lifetime Warranty
tatoko Aluminum Computer CPU 18 Pipes Water Cooling Heat Exchanger Radiator 10.6 Inch Long White
- Product Name: Water Cooling Radiator
- Package Content: 1 x Water Cooling Radiator, Some Screws
- Material: Aluminum,Plastic
- Color: White,Red
- Size: 270 x 120 x 30mm/10.6″ x 4.7″ x 1.2″(L*W*H)
- Type: Water Cooling
- Fitting Thread: G1/4 Inch
- Tube Quantity: 18
- Fit ID Tube Inner Diameter: 8 -12mm / 0.3” – 0.5”
- Fit ID Tube Outer Diameter: 11 mm / 0.43”
- Model Number: 240p
- Shorter Screw Size: 7 x 3 mm / 0.3” x 0.12”(L*D)
- The red Rubber stopper is to resist dust. when installing, please remove the red Rubber stopper
Brand new and high quality
The red Rubber stopper is to resist dust.
when installing, please remove the red Rubber stopper
This design effectively increases the cooling area, improve the efficiency of heat exchange.
Applicable to computer CPU , industrial variable frequency drives, laser cooling, and air conditioning evaporator.
Heat exchanger radiator only, the other water cooling system accessories are not included here.
Note: The package does not contain any pipe joints connector.
Yoidesu CPU Cooling Heat Exchanger Water Pump Tank 50mm Diameter Cylinder Water Cooling Tank G1/4 Thread Computer DIY Cylinder Water Tank for CPU Cooling Multiple Length(400mm)
- Water tank – With its full open design and thread tighten up and down structure, It’s easy to dissemble and clean the water cooling system.
- Imported CNC machining and high quality POM material process, makes the tank safe and durable to use. POM material features good temperature resistance.
- G1/4 Thread – The upper and lower interfaces are all equipped with the imperial G1/4 standard threaded interface, which is compatible with all common standard pagodas on the market.
- Quick-twist joint and high-strength material, no need to worry about deformation and cracking of interface and thread.
- 50mm diameter tube enables this cylinder water tank to bear more water for faster heat dissipation.
Features:
1.Water tank – With its full open design and thread tighten up and down structure, It’s easy to dissemble and clean the water cooling system.
2.Imported CNC machining and high quality POM material process, makes the tank safe and durable to use.
3.POM material features good temperature resistance.
4.G1/4 Thread – The upper and lower interfaces are all equipped with the imperial G1/4 standard threaded interface, which is compatible with all common standard pagodas on the market.
5.Quick-twist joint and high-strength material, no need to worry about deformation and cracking of interface and thread.
6.50mm diameter tube enables this cylinder water tank to bear more water for faster heat dissipation.
Specification:
Type: DIY Cylinder Water Cooling Tank Kit
Body material: Pmma
Shell material: Pom high temperature resistant rubber
Outer diameter: 50mm
Weight: Approx. 352g
Length: Approx. 190mm / 240mm / 300mm / 400mm ±1mm
Package list:
1 * Tank
2 * Plastic Brackets
2 * Metal L-shaped Brackets
6 * Installation Screws
Yoidesu CPU Cooling Heat Exchanger Water Pump Tank 50mm Diameter Cylinder Water Cooling Tank G1/4 Thread Computer DIY Cylinder Water Tank for CPU Cooling Multiple Length(190mm)
- Water tank – With its full open design and thread tighten up and down structure, It’s easy to dissemble and clean the water cooling system.
- Imported CNC machining and high quality POM material process, makes the tank safe and durable to use. POM material features good temperature resistance.
- G1/4 Thread – The upper and lower interfaces are all equipped with the imperial G1/4 standard threaded interface, which is compatible with all common standard pagodas on the market.
- Quick-twist joint and high-strength material, no need to worry about deformation and cracking of interface and thread.
- 50mm diameter tube enables this cylinder water tank to bear more water for faster heat dissipation.
Features:
1.Water tank – With its full open design and thread tighten up and down structure, It’s easy to dissemble and clean the water cooling system.
2.Imported CNC machining and high quality POM material process, makes the tank safe and durable to use.
3.POM material features good temperature resistance.
4.G1/4 Thread – The upper and lower interfaces are all equipped with the imperial G1/4 standard threaded interface, which is compatible with all common standard pagodas on the market.
5.Quick-twist joint and high-strength material, no need to worry about deformation and cracking of interface and thread.
6.50mm diameter tube enables this cylinder water tank to bear more water for faster heat dissipation.
Specification:
Type: DIY Cylinder Water Cooling Tank Kit
Body material: Pmma
Shell material: Pom high temperature resistant rubber
Outer diameter: 50mm
Weight: Approx. 352g
Length: Approx. 190mm / 240mm / 300mm / 400mm ±1mm
Package list:
1 * Tank
2 * Plastic Brackets
2 * Metal L-shaped Brackets
6 * Installation Screws
Conclusion
By our suggestions above, we hope that you can found water to cooling heat exchanger for you.Please don’t forget to share your experience by comment in this post. Thank you!
