Which Is The Best 1000W Zvs Low Voltage Induction Heating Module

Features:
24V input with no load current of 3A , 48V input with no load current of 6A
buyer need self-provided power and water cooling device
This circuit can do induction heating, or replace copper tube with high frequency transformer, it will be a powerful inverter

Note:
The kit contains a full set of driving circuit elements and brass
Buyers need to bring their own power and cooling unit.
The circuit board using double-sided fiberglass board, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, continuous work, please add a fan to blow down from above, to the resonance capacitors and other components cool.
The use of switching power supply Please note that due to high power are generally slow start function, which just opened machine output voltage is slowly rising, while it is turned on before the induction heating circuit if the voltage rises to 12V, because start insufficient voltage can not afford to vibration, resulting in two simultaneous conduction mos tube so burned components.
So the first will start switching power supply voltage reaches 12V above and then access the induction heating circuit.
The volume of the object being heated inside the heating coil can not exceed 1/5 of the volume (if the heating cylinder, then heating coil diameter less than the diameter of 1/3), or it may be due to overload or burn out the power supply to the circuit.
Although this circuit can tolerate 20-30A input current moment, but do not exceed 15A when safe work, you can easily add an ammeter between the power supply and heating driver board but always monitor the current overload

Package Includes:
1 x 20A 1000W Flyback driver inductive heater Zero Voltage Switching Tesla
1 x Coil

Note:

1. The kit contains a full set of driving circuit elements and brass

2. Buyers need to bring their own power and cooling unit.

3. The circuit board using double-sided fiberglass board, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, continuous work, please add a fan to blow down from above, to the resonance capacitors and other components cool.

4. The use of switching power supply Please note that due to high power are generally slow start function, which just opened machine output voltage is slowly rising, while it is turned on before the induction heating circuit if the voltage rises to 12V, because start insufficient voltage can not afford to vibration, resulting in two simultaneous conduction mos tube so burned components.

So the first will start switching power supply voltage reaches 12V above and then access the induction heating circuit.

5. The volume of the object being heated inside the heating coil can not exceed 1/5 of the volume (if the heating cylinder, then heating coil diameter less than the diameter of 1/3), or it may be due to overload or burn out the power supply to the circuit.

Although this circuit can tolerate 20-30A input current moment, but do not exceed 15A when safe work, you can easily add an ammeter between the power supply and heating driver board but always monitor the current overload.

This circuit can not only do the induction heating, the copper tube into the high-frequency transformer, is a powerful inverter.

Note:

Make sure to thoroughly cool this while running anywhere near the specified limits (a very high CFM computer fan will help).

You must turn your power supply on first then put the power to the heater or you will burn it up.

Package includes:

1 x ZVS Low Voltage Induction Heating Board 1 x Brass

Description:
This section of induction heating using low-voltage DC power supply 12-48V
Maximum current 20A, maximum power 1000W.
Tested 53V power supply when working properly.
Because of its moderate power, can be used for small parts DIY players do hardening, annealing and other heat treatment,
Also can be used with a graphite crucible melting gold, silver, copper, aluminum and other metals,uniform heating fast, very convenient.
24V input with no load current of 3A
48V input with no load current of 6A
The higher the voltage, the greater the heating current when the same thing, the effect is better,
But at the same time heat is also large, so to eradicate the actual situation to select the input voltage,
the general use of the words 24V or 36V power supply is enough.
This circuit can not only do the induction heating, the copper tube into the high-frequency transformer, is a powerful inverter
1. To increase the heat sink using a customized substrate as thick as 8.5mm!
Cooling capacity is very powerful.
2.Using the M4 pillars, fever smaller, more efficient.

Specification:
Input voltage: DC 5v-12 v
Maximum power 120w (12 v induction heating). 12 v, push the ignition coil primary 5 + 5 turn, about 30 w.
PCB size: 55 mmx37 mmx1.6 mm
Heating coil, the width of the heated objects as far as possible between the heating coil diameter of 1/3 ~ 1/2, most not more than two-thirds.

Package Included:
1 x ZVS driver board
1 x heating coil

Specification:
Input Voltage: 12V-48V (Recommendation: above 36V)
Power Requirments: Less than 12V >=10A, More than 15V >=15A
Maximum Power: 1800W
Maximum Current: 40A
Heater Inner Ring: 70mm / 2.8in
Size: 18 * 12 * 9 cm / 7.1 * 4.7 * 3.5in
Weight: Approx. 1052g

Package Included:
1 x PCB Board
1 x Copper Tube

Note:
1. When using a switching power supply, make sure that the power supply voltage is stable before connecting to the induction heating circuit.
2. Do not heat metal that is too large or it may be overloaded. Please add a 35A fuse or ammeter.
3. Although this driver board can withstand more than 40A, it is recommended not to exceed 48V 35A to prevent accidents and damage.
4. The minimum input voltage of the module is 12V, the voltage of 12V must be greater than 10A to use the power supply.
5. If you find that the MOS tube is hot, first consider whether the power output meets the requirements.
6. Do not clear the circuit board, otherwise it will emit a very high frequency of noise, and then the MOS tube will burn out.
7. It is recommended to use a 36V 20A power supply. Below 12V is very dangerous.

Note: It is the working voltage work, the input voltage when the coil is connected or heated. Not the no load voltage. When 12V for power supply, the current should be no less than 20A; when 24V for power supply, the current should be no less than 30A; when 36V for power supply, the current should be no less than 50A. For long time use, brass tube with water must be used for cooling.Output port copper cylinder can most install copper tube of 10mm diameter; when the copper diameter is no more than 4mm, you can solder the copper tube on the clip then fix the copper cylinder; when the diameter is no more than 2mm, it can be connected with output terminal. 

This one is mainly used for heating, suitable for the heating power is less than 300W.

Specifications:

Input Voltage: DC 12-40V
Max Input Current: 50A (short time)

PCB Size: 16.5 x 11.2cm/6.5 x 4.4 inch

Board thickness: 0.16cm/0.063inch(only board)

Weight: 780g

Package Included:

1 x induction heating module

1 x brass tube

1 set x brass cylinder and screw

Description:

Item type: tool

This section of induction heating using low-voltage DC power supply 12-48V.
Maximum current 20A, maximum power 1000W.
Tested 53V power supply when working properly.
Because of its moderate power, can be used for small parts DIY players do hardening, annealing and other heat treatment.
Also can be used with a graphite crucible melting gold, silver, copper, aluminum and other metals, uniform heating fast, very convenient.
Inside diameter of the coil: approx. 40mm.
Height of the coil: approx. 50mm.
24V input with no load current of 3A.
48V input with no load current of 6A.
The higher the voltage, the greater the heating current when the same thing, the effect is better.
But at the same time heat is also large, so to eradicate the actual situation to select the input voltage, the general use of the words 24V or 36V power supply is enough.
It suits 12-36V power supply (not included).
The coil accept 40mm crucible.

Package includes:

1 x ZVS low voltage induction heating board
1 x brass coil

Notes:

Note:
1: The kit contains a full set of driving circuit elements and brass
2: Buyers need to bring their own power and cooling unit.
3: The circuit board using double-sided fiberglass board, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, continuous work, please add a fan to blow down from above, to the resonance capacitors and other components cool. 
5: So the first will start switching power supply voltage reaches 12V above and then access the induction heating circuit.
6: The volume of the object being heated inside the heating coil can not exceed 1/5 of the volume (if the heating cylinder, then heating coil diameter less than the diameter of 1/3), or it may be due to overload or burn out the power supply to the circuit.

When made with switch power supply, because of the high power generally has function of soft start, namely just powered on the output voltage is slowly rising, while if before the voltage up to 12v connected induction heating circuit, will not work and burn MOS tube. So voltage reaches more than 12 v connected induction heating circuit. The volume of heated objects cannot be more than 1/10 of the heating coil internal volume (that is, the heating cylinder diameter more than 1/3 heating coil diameter), otherwise it may because of overload and burned circuit or the power supply. Although this circuit can tolerate 30A input current, but the insurance for the purpose of work not more than 20A. This circuit can do induction heating, or replace copper tube with high frequency transformer, it will be a powerful inverter Package include 1pcs 1000W ZVS Low voltage induction heating board module/Tesla coil 12-48V 20A

Specifications:
Inside diameter of the coil: approx. 40mm
Height of the coil: approx. 50mm
24V input with no load current of 3A
48V input with no load current of 6A
It suits 12-36V power supply (not included)
The coil accept 40mm crucible

Note:
The use of switching power supply Please note that due to high power are generally slow start function, which just opened machine output voltage is slowly rising, while it is turned on before the induction heating circuit if the voltage rises to 12V, because start insufficient voltage can not afford to vibration, resulting in two simultaneous conduction mos tube so burned components.
So the first will start switching power supply voltage reaches 12V above and then access the induction heating circuit.
The volume of the object being heated inside the heating coil can not exceed 1/5 of the volume (if the heating cylinder, then heating coil diameter less than the diameter of 1/3), or it may be due to overload or burn out the power supply to the circuit.
Although this circuit can tolerate 20-30A input current moment, but do not exceed 15A when safe work, you can easily add an ammeter between the power supply and heating driver board but always monitor the current overload.
This circuit can not only do the induction heating, the copper tube into the high-frequency transformer, is a powerful inverter.

We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.

Package Includes: 1Pcs
1 x ZVS low voltage induction heating board
1 x brass coil

Features:
The use of military-grade 1.6MM double-sided glass fiber production.
Using factory-customized large inductors, consistent parameters, and more stable performance (30MM large magnetic ring, using 1.2MM pure copper wire).
All resistors use five-ring tight resistors (five ring precision resistors have small errors and work more stable)
The over-current portion of the circuit board is entirely tin-added and can be used for induction heating.
Generally, 12-30V DC power supply is used, and the current needs to be more than 10A, because the driver board is working in the state of zero voltage switching.

Description:
Its efficiency is the highest, and other drivers are incomparable. The higher the voltage is, the longer the arc is.
The 27V/15A switching power supply can be used to pull an arc of more than 80mm for testing, and basically does not generate heat.
It can also be used for induction heating or quenching. This is also because the higher the voltage is, the faster the heating will be. At the same time, the larger the heat, it is recommended to heat the diameter of the solid object no more than 2/3 of the coil.

Specifications:
Material: Metal
Color: black
Size: 85*69*32mm
Maximum current: 20A
Maximum power: 1000W

Package Included:
1 x Module

Note:
Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
The color of the actual items may slightly vary from the above images due to different computer screen, thanks for your understanding.

Conclusion

By our suggestions above, we hope that you can found 1000w zvs low voltage induction heating module for you.Please don’t forget to share your experience by comment in this post. Thank you!