Best Electric Hot Water Heater Faucetelectric

1.Kitchen, toilet, etc …All Can Use, Convenient, Simple, Easy To Install
2.4 types to choose: Big Under Bend, Small Under Bend, Big Lateral Bend, Small Lateral Bend.
3.Voltage: 110V/50HZ
4.Power: 2000W


Description:
1.Power unified are the 2000-watt. Temperature at about 30 degrees to 40 degrees in winter; Temperature at about 30 degrees to 60 degrees in summer.
2.ABS engineering plastics, high temperature resistant, soft and strong, not easy to burst, high shape stability, strong anti-stamping, UV radiation, so that the product is not easy to aging, security is more durable and lasting


Features:
Product Name: Heating water faucet
The main material: H59A level environmental refined
copper + ABS engineering plastics
The inlet way: under the influent
Surface treatment: multiple plating
Spool: Diamond level Ceramic spool
Heating tube: high-purity copper liner heating element
Rated voltage: 110V/50HZ
Rated Power: 2000W
Working pressure :0.04-0 .5 MPA
Waterproof grade: 1PX4
Diameter: General diameter
Cord Length: about 1.5 m
Plug type: designed.the GN – 901

Get hot water where it’s needed, when it’s needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37″ cord, or can be installed in-line with a larger hot water source to provide “on-demand” use. The glass-lined tank offers great insulation and added durability, while the heater’s fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing décor when installed in a visible location, making this heater a great option in any room.

FEATURES

Instant hot water comes with powerful 5.5kW heating element, expect hot water for 3 seconds, perfect choice for sinks to provide endless hot water any time.

ENERGY SAVING

This tankless water heater avoids standby heat loss of those bulky storage water heaters, minimize energy waste and achieve 65% energy saving with help of its smart self adjustment technology.

HEALTHY WATER QUALITY

Traditional bulky water tanks store water for long time, causing bacterial growth and rust issue, time to get clean water via a tankless hot water heater. The ECOTOUCH unit separates water and electricity line so as to avoid issue of calcium deposits.

MULTIPLY SAFETY PROTECTIONS

Over temperature protection

Dry heating protection

Leakage protection

Water and electricity line separated

EASY INSTALLATION

Real compact design, water heater cooridates with scenes decor, above sink or under sink water heater, horizontally, vertically or obliquely installation. Comes with easy installation brackets, pipe fitting of 1/2″ NPT and 12AWG power cord(fixed to the unit) so you don’t to have to hire a plumber even if you can do it.

SPECIFICATIONS

Power: 5.5kW

Voltage: 240V~60Hz

Min. water flow to activate the unit: 0.475GMP

Max tempt rise from 67°F to 120°F @ 1GPM

Max. Amperage: 23A

Recommended wire size: 12AWG

Required circuit breaker : 1x 2-Pole 30 AMP

KINDLY NOTE

1.The unit is mainly for sinks, not for shower purpose.

2.The tankless water heater should be installed professionally.

3.Please read instruction manual carefully prior to installation and use!

PACKAGE INCLUDES

1X ECOTOUCH 5.5kW instant water heater

1X Instruction manual and warranty card

1X Installation accessories

1X Remote control(for Black model)

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 62°F and above. The ECO 18 is capable of heating over 2.5 gallons per minute, which is the equivalent of one water saver shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62°F, and an output setting of 105° F. Two showers emitting no more than 1.5 gpm each can be run simultaneously when incoming water temperature is above 70° F. Digital temperature control allows you to set your temperature in increments of 1°. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. However, when sized properly it will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 18 requires a minimum 150 amp electrical panel for installation with (2) 40 amp double pole breakers connected to (2) sets of #8 awg wire. Plumbing connections are 3/4″ NPT. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 62 Degree F and above. The ECO 18 is capable of heating over 2.5-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62 Degree F. Two showers can be run simultaneously when incoming water temperature is above 70 Degree F in warmer climates such as South Texas, South Florida, New Mexico, Arizona and South California. These models come with a digital temperature control that allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

FEATURES –

◆ Saves Energy and Money
The Thermoflow Elex 3.5 electric tankless water heater is adopt to advanced technology of Germany.Changing to this Elex 3.5 means there are no standby losses. No need to preheat before using, the hot water will come out from the heater instantly after you turn on the water heater,you only need to stop it immediately after using,no any waste for water or electricity.
◆ Unlimited Hot Water
Instant hot water thanks to rapid and maintenance-free bare wire heating systems.Because a Thermoflow heats water only when it is used, and for as long as it is needed, there is an endless supply of hot water. Nobody runs out of hot water .
◆ Space Saving
A Thermoflow Elex 3.5 tankless water heater completely replaces a conventional tank heater, yet takes up considerably less space, saving valuable living space and providing endless hot water on demand.
◆ Two Options for Applications
The Elex3.5 model can be used for two different applications:Act as primary heater, just connect the inlet with cold water directly, and connect the outlet with mix tap; Act as booster heater, just connect the inlet with the outlet of storage tank,and connect the outlet with mix tap, more fast heating, higher flow rate, saving your time.

USING TIPS –

• The device must be filled with water before connection to the electrical supply!
• Make sure the min pressure of your water supply system reaches 7.3 PSI.
• Please read the instruction manual carefully before you install or using the water heater !

PACKAGE INCLUDES –
1X Thermoflow 3.5kW electric tankless water heater
1X plastic bracket
1X bag of installation accessories (2 gaskets,2 anchors,2 screws)
1X instruction manual

Inquiry & aftersales service: [email protected]

Hotline:＋1（844）334-4203

Save water by eliminating the wait for hot water to reach the faucet. Simply tap into the water line and install the heater directly at the sink. No need for costly recirculating lines and pumps. And when you want to eliminate the wait for hot water but need more volume, install the Eco smart heater in-line with a larger hot water source, such as a thankless heater or a storage tank heater. Lightweight and compact, these units plug into a standard 110 volt outlet.

Conclusion

By our suggestions above, we hope that you can found electric hot water heater faucet,electric for you.Please don’t forget to share your experience by comment in this post. Thank you!