owneaster 
Nowadays, there are so many products of hot surface igniter for gas water heaters in the market and you are wondering to choose a best one. You have searched for hot surface igniter for gas water heaters in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings hot surface igniter for gas water heaters which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Emerson H150 Universal Ignitor
Universal hotrod hot surface igniter is a premium nitride Igniter. Replaces over 100 silicon carbide Igniters. For gas-fired forced-air furnaces, water heaters and boilers. Mounting brackets for easy installation. 5 year warranty.
Duralight Furnace Ignitor Direct Replacement For Rheem Ruud Weatherking OEM Part 62-22868-93
- Duralight Two Year Replacement Warranty
- Made In USA
- Exact Fit with No Adapters or Wiring Changes Required
- Direct Replacement Part For Most Rheem, Ruud, & Weatherking Furnaces With Hot Surface Ignitors – Will Not Fit “Drum” Heat Exchanger Type Furnaces
- Replaces Part Numbers 62-22441-01, 62-22548-01, 62-22868-01, 62-22868-02, 62-22868-82, 62-22868-92, 62-22868-93S, 62-22869-01, 62-23460-01, and 8553-5514
This silicon carbide hot surface ignitor replaces most applications on Rheem, Ruud, and Weatherking furnaces. This part is a direct replacement. It will fit exactly and requires no adapters or wiring changes. This ignitor replaces both the Norton 201 and 271 types used on Rheem, Ruud, and Weatherking furnaces. This part WILL NOT fit the -GEC and -GED “Drum” furnace models. This parts replaces part numbers 62-22441-01, 62-22548-01, 62-22868-01, 62-22868-02, 62-22868-82, 62-22868-92, 62-22868-93S, 62-22869-01, 62-23460-01, and 8553-5514. These ignitors are extremely fragile and should be handled with care. Do not touch the grey ignitor portion with bare hands, the oil in your fingers can cause a “hot spot” and lead to premature failure. This part is covered by the exclusive Duralight two year limited replacement policy. If this part fails within two years from date of purchase, return the defective part and a copy of the original invoice to the place of purchase for replacement. Contact the authorized Duralight dealer that you purchased the part from for details. Original equipment manufacturer’s brand name(s) and part numbers are used for identification purposes only. This item is supplied by OneTrip Parts and meets or exceeds original equipment specifications.
Emerson 767A-372 Hot Surface Ignitor, 120V
Emerson 21D64-5PK Hot Rod Universal Surface Ignitor, 5-Pack
- Replaces over 150 OEM, White-Rodgers and competitive HIS ignitors
- For gas-fired forced-air furnaces, water heaters and boilers
- Includes universal breakaway bracket to make installation easy, eliminating the need for multiple brackets.
- Contains 5 21D64-2 single pack ignitor kits
The Emerson Hot Rod premium nitride ignitor upgrades silicon carbide integrated or non-integrated systems to long-lasting and durable nitride. The nitride ignitor is connected in the existing HIS (hot surface ignition) system, ensuring consistent performance and long ignitor life. The 21D64-2 kit includes everything needed for a quick installation.
Robertshaw 41-408 Hot Surface Igniter
- Made from high-purity recrystallized silicon carbide (crystar) which combines physical and thermal strength with stable electrical properties
- Designed to reach ignition temperature(s) within 17 seconds
- Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity
- Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection
- Operate at 120 vac. Some modules are rated for 208/240V input, however, the voltage to the ignitor is stepped down to 120 vac.
- Hot Surface Igniter
- HOT SURFACE IGNITOR W/PLUG
- Replacement Part
Product Description
The Robertshaw 41-400 series norton hot surface ignitors deliver dependable ignition in heating systems of every description. From furnaces and boilers to rooftop heaters, infrared burners, unit heaters, water heaters and many other types of hvac equipment. The 41-400 series hot surface ignitors are made of high-purity recrystallized silicon carbide (crystar) which combines physical and thermal strength with stable electrical properties. The 41-400 series are designed to reach ignition temperature(s) within 17 seconds. They have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity. The lead wires are also enclosed with a special high-temperature fiberglass insulation providing total electrical protection. Note: all 41-400 series ignitors are 120 vac models. Some hot surface modules are rated for 208/240 volts input, however they step the voltage to ignitor down to 120 vac.
From the Manufacturer
Hot Surface Igniter. Hot Surface Igniter. HOT SURFACE IGNITOR W/ PLUG. Replacement Part. Home Repair, Repair Parts, Fix Plumbing.
Supplying Demand SIG104 Universal Furnace Igniter Fits TJ90SIG104 AP4503199
This is a Supplying Demand furnace igniter.
Emerson 767A-380 Hot Surface Ignitor, 120V, Silicon Carbide
The White-Rodgers 767A-380 Hot Surface Ignitor features 6.125″ leads, and 200 Degree insulation. This ignitor is a reliable source of ignition.
Polaris Water Heater 100110899 Natural Gas Igniter Hcg – 9006
Product Description
9006101205, HOT SURFACE IGNITOR. Polaris Water Heater Genuine OEM replacement part. Polaris Water Heater provides high quality water heaters suitable for the commercial food industry. Use genuine OEM parts for safety reliability and performance.
From the Manufacturer
9006101205, HOT SURFACE IGNITOR. Polaris Water Heater Genuine OEM replacement part. Polaris Water Heater provides high quality water heaters suitable for the commercial food industry. Use genuine OEM parts for safety reliability and performance.
Robertshaw 41-409 Hot Surface Ignitor, Series
Robertshaw’s 41-400 series Norton hot surface Igniters deliver dependable ignition in heating systems of every description. from furnaces and boilers to rooftop heaters, infrared burners, unit heaters, water heaters and many other types of HVAC equipment.Operate at 120V AC. Some modules are rated for 208/240V input, however, the voltage to the ignitor is stepped down to 120V AC. Manufacturer: ROBERTSHAW – Country of Manufacture: United States – Manufacturer Part Number: 41-409.
Conclusion
By our suggestions above, we hope that you can found hot surface igniter for gas water heaters for you.Please don’t forget to share your experience by comment in this post. Thank you!
