owneaster 
Nowadays, there are so many products of ninja blender cups replacement bottom blade in the market and you are wondering to choose a best one. You have searched for ninja blender cups replacement bottom blade in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings ninja blender cups replacement bottom blade which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
39,186 Reviews Scanned
Blender Blade Replacement Parts for Ninja 16 oz Blender Cup, 6 Fins Blender Extractor Blade Replacement,4 Blade Assembly For Nutri Ninja Bl770, Bl771, Bl773co,Bl780, Bl660, Bl740
- 【PREFECT FIT】: Blender Blade Assembly for Nutri Ninja BL770, BL771, BL773CO, BL780, BL660, BL740, only fits for 16 oz Cup, 6 Fins, 3.35 inches / 8.5 cm
- 【GOOD REPLACEMENT】: Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
- 【PREMINUM QUALITY】: Made of food grade PP and stainless steel
- The replacement blade has been well-tested by the manufacturer.
- 【PAY ATTENTION】: This blade is Only fit for Ninja 16oz Cup. (Not fit 18oz, 24oz, 32oz)
- 【100% SATISFACTION GUARANTEE】 Please kindly check your Ninja blender is 6 fins blender before purchase. With 3 months warranty: for any reason you’re not completely satisfied,can ask for a replacement or full refund.
AxPower 7 Fins Extractor Blades Replacement Part Bottom Blade for Ninjia Blender for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 and More(2 Pack, 7 Fins)
- 【APPLY TO】The 7 fins extractor blade is suitable for Nutri Ninja Auto iQ BL2012, BL2013, BL455-30, BL480, BL480D 30, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL494, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102 (Only fit for 18oz, 24oz, 32oz cup not fit for 16oz). Please make sure your Ninjia blender base has 7 fins before order.
- 【HIGH QUALITY】The high-speed blade is made of food-grade stainless steel, high hardness brings qualified anti-corrosion performance. Moreover, the outer is made of durable PP material, not easy to break and scrape.
- 【IMPORTANT NOTE】Note1: The rubber gasket in bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. Note2: If you’re going to use this replacement gasket, please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade.
- 【PACKAGE INCLUDED】 2 x 7 Fins Bottom Blade Replacements, 2 x Extra Gasket Rubbers and 1 x Cleaning Brush as a gift.
- 【BUY WITH CONFIDENCE】Thank you so much for your great support on us. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service as we can.
Similar items with 4 stars and above
Ninja Blender Blade Replacement Parts Bottom 6 Fins Assembly Within 1 Gasket Rubber Compatible For Nutri Ninja 16oz Blender Cup Bl770, Bl771, Bl773co,Bl780, Bl660, Bl740 (Black, Not OEM)
- 【PREFECT FIT】: This Ninja blender blade 6 fins replacement accessories fit for BL770, BL771, BL773CO, BL780, BL660, BL740. If want to purchase, please kindly make sure that your blade diameter is 3.35 inch / 8.5CM. It’s ONLY fit for 16oz Blender Cup. (NOT fit for 18oz, 24oz, 32oz) It’s non-original aftermarket part but exactly compatible with 6 FINS Nutri Ninja Blender.
- 【PREMIUM QUALITY】: Nutri ninja blender blade is made of food grade ABS plastic and High-strength stainless steel blade. This fruit ninja blender blade has been well-tested by the manufacturer. No metallic taste, non-oxidation, fastness, reusable and environmentally friendly. And the blender blade within a rubber gasket, No leakage and durable use.
- 【EASY TO SMASH & WASH】: Ninja professional blender blade is effortlessly pulverize fruit, vegetable and ice cubes into a delicious smoothie. After cleaning(suitable for dishwasher cleaning too ), please put the cover on. This cover can avoid cutting hands.
- 【PACKING INCLUDE】 1 x 6 fins bottom blade part, 1 x rubber gasket ( the rubber gasket had been already put into the 6 fins bottom blade assembly). Note: Be careful of the sharp blade when open your package. Although the blender bottom blade within a cover to avoid cutting.
- 【100% SATISFACTION GUARANTEE】 Please kindly check your Ninja blender is 6 fins blender before purchase. As this model just suitable for 6 fins Ninja blender. Any questions before or after purchase, please feel free to contact us, we’ll reply you within 12 hours.
Description:
– Item Name: Replacement Parts for Nutri Ninja Blender Blade Assembly 6 Fins
– Blade material: stainless steel
– Blade shape: Cross blade
– Diameter:3.35″/8.5CM
– Fit for 6 Fins and 16oz blender cup. (Not fit 7 fins and 18oz, 24oz, 32oz)
– This Replacement Ninja Blender Accessories ONLY Suit for: Nutri Ninja BL770, BL771, BL773CO, BL780, BL660, BL740. (Please kindly check your model carefully before purchasing.)
There are too many models of ninja blender blade, and our blade for nutra ninja blender can’t fit all the 6 fins blender’s motor, if any character is difference, please DO NOT purchase it. Thanks!
NOTE
The following two conditions must be met simultaneously before purchase:
1: Your original motor base must be 6 fins.
2: Your blender model must identity with our stated model.(BL770, BL771, BL773CO, BL780, BL660, BL740).
TIPS FOR USAGE
1. Sincerely recommend to replace the ninja blender blade of a new every 6 months for optimal performance.
2.The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the bottom blade.
3. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it.
4. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage).
5. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line.
6. Please make sure the replacement blade in right place and locked tightly.
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender.
Warranty Policy
For any reason you’re not completely satisfied, please contact us for a replacement or full refund, we will handle your demand within 12 hours.
Ninja Blender Replacement Parts 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits 1000w Nutri Ninja Auto-iQ BL480-30 BL482-30 BL682 BL640
- 【Ninja Blade Apply to】7 fins Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 (Please confirm your blender need 7 fins replacement blade before purchasing).
- 【Nutri Ninja Replacement Parts】 Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel.
- 【Important Tips】Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- 【Packing Include】 1x 7 Fins Bottom Blade Replacement, 2 x Replacement Gasket Rubber ( One Gasket Rubber already on the 7 fins replacement blade). Please check your existing blade by counting the fins before purchase. It Should Be 7fin.
- 【100% SATISFACTION GUARANTEE】 If you are buying before or after purchase any questions, please feel free to contact us, we’ll issue you a full refund or replacement.
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender. Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
6 Fins Blender Blade 4inch Diameter Female Blade for Nutri Ninja iQ 900W BL454-70 BL455-70 and 1000W BL480-70 BL480W-70 BL481-70 BL482-70 BL483-70 Blender Replacement Parts
- PLEASE CHECK – Please check your existing blade for the following 1) Count the FINS IT SHOULD BE 6-FINS. 2) The blade has MALE FINS 3) 3.94″ (10cm) Diameter.
- PLEASE CHECK your blade and compare it with our pics before order, This blade have the Female tip, Please compare with your original one first
- Packing include: 1x 6Fins Bottom Blade Assembly, 2 x Replacement Gasket Rubber (One Gasket Rubber already in the blade )
- Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket. Be careful of the blade when open the package.
- Made of Food Grade BPA Free Plastic and Stainless Steel, Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
Pro Blender Extractor Blade Assembly with Gasket, 7 Fins Blender Blade Replacement Parts for Nutri Ninja BlendMax DUO with Anto-IQ Boost
- ⚠ BEFORE PURCHASING please check your existing blade for the following 1) Count the FINS IT SHOULD BE 7-FINS； 2) The blade has MALE FINS； 3) 4 inches (10cm) Diameter.
- The blender blade replacement parts are made of food grade BPA Free plastic and stainless steel, effortlessly pulverizes fruits, vegetables, superfoods and protein shakes into a delicious, smooth texture. Dishwasher safe.
- The extractor blade assembly has the power to break down, pulverize and emulsify foods so you can unlock the hidden nutrition inside the foods that you eat!
- The extractor blade for Nutri Ninja blenders not only extracts all of your foods’ nutrients, but it actually breaks them down to a pre-digested state, easing the stress put on your digestive system and helping you achieve optimum health.
- 【100% SATISFACTION GUARANTEE】If you are not sure that is it compatible with your blender, please contact our service customer on Amazon. If you have any problems about the product you got, please feel free to contact us by after-sale card.
Replacement Nutri Ninja 6-Fin Extractor Blade FITS Nutri Ninja Blender Auto iQ BL450-70 BL451-70 BL454-70 BL455-70 BL482-70 Only fit for 18 oz 24 oz.32 oz
- NUTRI NINJA 6 FIN Blade for Nutri Ninja Blender FITS ONLY THIS MODELS 900W BL450-70, BL451-70, BL454-70, BL455-70 1000W BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70,BL484-70
- DOES NOT FIT THIS MODELS BL450-30, BL451-30, BL454-30, BL455-30 1000W BL480-30, BL480W-30, BL481-30, BL482-30, BL483-30,BL484-30
- DOES NOT FIT 16oz CUPS bl770,bl771.
- Ninja Blade Replacement 6 Fins – 3.94″/10cm diameter, effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture.
- NOTE – The replacement rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the bottom blade. Also please sure your blader uses 6 fins.
NUTRI NINJA 6 FIN BLADES WORKS FOR THIS BLENDERS ONLY Nutri Ninja Pro Blender 900w BL450-70, BL451-70, BL454-70, BL455-70 and 1000w Auto-iQ BL480-70, BL480W-70, BL481-70, BL482-70, BL483-70, BL484-70
DOES NOT WORK FOR THIS MODELS Nutri Ninja Pro Blender 900w BL450-30, BL451-30, BL454-30, BL455-30 and 1000w Auto-iQ BL480-30 BL481-30 BL482-30 BL484-30
Replacement Parts for Nutri Ninja, Blender Blade Assembly and 2 Pack Single Serve 16-Ounce Cup Set for BL770 BL780 BL660 Professional Blender
- BEFORE PURCHASING – Please check your existing blade for the following 1) Count the FINS IT SHOULD BE 6-FINS. 2) The blade has MALE FINS. 3) 3.35″ (8.5cm) Diameter. 6 fins blade only fits for Ninja BL770, BL771, BL773CO ,BL780, BL660, BL740
- EASY TO USE – Simply attaches to Pro Extractor Blades included with your blender. The Pro Extractor Blades are able to crush through whole fruits, vegetables, nuts, and ice.
- EASY TO CLEAN – The 16-Ounce Cup and Blender Blade are Made of Eco-friendly materials, dishwasher safe, easy to clean.
- PACKAGE INCLUDE – 1* Single Serve Blade, 2 * 16-Oz Single Serve Cups with Lid
- MONEY-BACK GUARANTEE – It’s non-original aftermarket part. for any reason you’re not completely satisfied,can ask for a replacement or full refund.
NLSD Replacement Parts Blender Blade Assembly Fits Nutri Ninja Auto-iQ BL480-30 BL681A-30 BL682 BL640, ((7 fins) Black
- ⚠ BEFORE PURCHASING please check your existing blade for the following 1) Count the FINS IT SHOULD BE 7-FINS. 2) The blade has MALE FINS 3) 4″ (10cm) Diameter.
- 7 fins blade Fits for Nutri Ninja Pro BL450-30/BL456-30/BL451-30/BL454-30
- Nutri Ninja Auto-iQ BL480-30/BL480D-30/BL481-30/BL482-30/BL490-30/BL681A-30/BL682-30/BL642W/BL682.
- 7 fins blade Fits for Nutri Ninja Auto-iQ Pro Complete BL487-30/BL488W-30/BL487A-30
- Nutri Ninja Auto-iQ Compact System BL491-30/BL492-30/BL492W-30
- NOT FIT BL66x,BL77x,BL8xx, NOT FIT model # end with 70 (not fit for BL450-70,BL451-70,BL454-70,BL480-70,BL484-70)BL481-70,BL482-70,BL483-70
- Made of Food Grade BPA Free Plastic and Stainless Steel, Effortlessly Pulverizes Fruits, Vegetables, Superfoods and Protein Shakes into a Delicious, Smooth Texture. Dishwasher Safe.
7 FINS Nutri Ninja Pro Extractor Blades Assembly Works with these models:
(1) Nutri Ninja Pro BL450-30/BL456-30/BL451-30/BL454-30
(2) Nutri Ninja Auto-iQ BL480-30/BL480D-30/BL481-30/BL482-30/BL490-30/BL681A-30/BL682-30/BL642W/BL682
(3) Nutri Ninja Auto-iQ Pro Complete BL487-30/BL488W-30/BL487A-30
(4) Nutri Ninja Auto-iQ Compact System BL491-30/BL492-30/BL492W-30 (Only fit for 18oz, 24oz, 32oz not fit for 16oz)
NOT FIT for: 6 pins, model# end with 70, BL6XX, BL7XX, BL8XX, NJXX
NOT FIT For: BL620C, BL660, BL663, BL682, BL201, BL610, NJ600, BL740, BL772, BL771, BL770, BL682, BL830, BL780, BL810 BL820 BL830
Warranty Policy
*All products sold by NLSD are covered by 3 months warranty.
*NLSD endeavours to provide customer with new replacement for any product within 15 days from the date of purchase.
*If a customer received a product which is faulty or damaded on arrival, please notify us within 15 days.
*Beyond 15 days, NLSD will provide customer a refund, exchange or repair the product.
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy ninja blender cups replacement bottom blade, eg:
- What are Top 10 ninja blender cups replacement bottom blade for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 ninja blender cups replacement bottom blade to buy?
- What are Top Rated ninja blender cups replacement bottom blade to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) ninja blender cups replacement bottom blade?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for ninja blender cups replacement bottom blade.
- Before deciding to buy any ninja blender cups replacement bottom blade, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose ninja blender cups replacement bottom blade and What you should consider when buying the ninja blender cups replacement bottom blade and Where to Buy or Purchase the ninja blender cups replacement bottom blade. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 ninja blender cups replacement bottom blade of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about ninja blender cups replacement bottom blade.
Conclusion
By our suggestions above, we hope that you can found ninja blender cups replacement bottom blade for you.Please don’t forget to share your experience by comment in this post. Thank you!
