The 8 Best Ecosmart Eco 11 55 Heating Elements

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Product description

Stiebel Eltron Tempra 24 Plus Electric Tankless Water Heater, 208/240 Volts The Tempra Plus is the most technologically advanced tankless water heater available on the market today. The Tempra series has been redesigned completely inside and out – upgraded heavy-duty electronics, a simple single flow sensor design, a hinged cover for easy access, and Advanced Flow Control for the Tempra Plus. Welcome to the next generation of German quality. The Stiebel Eltron Tempra 24 Plus Electric Tankless Water Heater is designed to replace a conventional tank with no inconvenience to the users hot water needs. The water heater reduces the eletric bill and saves energy on average of 15%-20% kWH compared to a conventional tank water heater. With the dial at the users fingertips the hot water temperature can be adjusted at anytime, and the unit takes up much less space than a tank water heater. The Tempra has several advantages over a gas-type tankless water heater. Compared to many similar gas tankless models the Tempra is less expensive to purchase. Installation is also much simpler and cheaper since it is not necessary to vent a Tempra to the outside. Stiebel Eltron Tempra 24 Plus Electric Tankless Water Heater, 208/240 Volts Specifications: Voltage: 240 Wattage: 24 Amperage: 2×50 Min. required circuit breaker size: double pole 2×60 Recommended wire size: 2 x 6 Maximum temp. increase: 92 Weight: 15.4 Width: 16 5/8 Height: 14 1/2 Depth: 4 5/8 Working pressure: 150 PSI

From the Manufacturer

The Tempra® Plus is the most technologically advanced tankless water heater available on the market today. Advanced Flow Control is exclusive to the Tempra® Plus and ensures a constant temperature output no matter how great the hot water demand is. Advanced Flow Control technology works by automatically adjusting the flow of water to eliminate unpleasant temperature fluctuation. What that means to you is a consistently satisfying experience every time, all the time !

Bake element assembly. This is not a Whirlpool OEM product. The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility. “The trademarks, logos, and service marks (collectively the “Trademarks”) displayed herein Supplying Demand are registered and unregistered trademarks of Supplying Demand, its affiliates, and others. Nothing contained herein should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed herein without the written permission of Supplying Demand or such third party that may own the trademark displayed herein. Your misuse of the trademarks displayed herein, or any other content on this website, except as provided herein, is strictly prohibited.”

Heating Element for Eco smart Electric Tank less water heater for ECO 5.5 kW unit. Contact Eco smart for more information.

Heating Element for Eco smart Electric Tank less water heater for ECO 6kW unit. Contact Eco smart for more information.

Trial for Eco smart Electric Thankless Water Heaters. Used with ECO 18, ECO 24 and ECO27 models. Contact Eco smart for more information.

This is the triac for the 1St heating element on the Ecosmart eco 36 electric tank less water heater.

Heating Element for Eco smart Electric Tank less water heater for ECO 8kW unit. Contact Eco smart for more information.

Conclusion

By our suggestions above, we hope that you can found ecosmart eco 11 5.5 heating elements for you.Please don’t forget to share your experience by comment in this post. Thank you!