owneaster 
Nowadays, there are so many products of heating bed 3d printer 400 x 400 mm in the market and you are wondering to choose a best one. You have searched for heating bed 3d printer 400 x 400 mm in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating bed 3d printer 400 x 400 mm which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
USA Material CR10 S4 Silicone Heater Pad 400x400mm for CR-10 S4 3D Printer Bed w/Screw Holes, Adhesive Backing + Sensor (120V)
- high temperature silicone heater pad for Creality CR-10 S4 3D printer
- This silicone heating pad with 4 pre-made screw holes as the drawing shows is designed for CR-10 S4 3D printer building plate.
- With 1.2meter NTC 100K 3950 thermistor for temperature Control (Choose Number 1 in the Marlin firmware)
- Please DO NOT POKE NEW HOLES for this bed as the whole pad is a circuit, so it will 100% damage the circuit if you poke new holes anywhere
- Important Notes: Please heat only after being mounted onto the plate. Do Not heating without proper heat-sink.
This silicone heating pad with 4 pre-made screw holes as the drawing shows is designed for CR-10 S4 3D printer building plate.
Backing:3M adhesive backing
Size: 400mmx400mm
It’s Electricity AND Heat you are coping with. We are absolutely your right choice with 100% guarantee for high quality heaters
Much safer and more reliable heat source than RepRap PCB heatbeds.
With 1.2meter NTC 100K 3950 thermistor for temperature Control.
Power consumption: 1000W.
Attached with two pieces 1.2meter length power wire
400mm x 400mm x 5mm Borosilicate Glass Build Plate for 3D Printer Glass Bed (400 x 400 x 5mm Square) by Express Shipping
- Made from boro glass with high transparence.
- High binding power when heating, easy to separate the plastic parts when cooling.
- Avoid replacing plastic film.
- Get you out of the trouble when plastic film decreased viscosity after a period of usage.
- Material: Borosilicate Glass.
Features: Low coefficient of thermal expansion, resistant to thermal shock compared to regular glass. High binding power when heating, Easy to separate the plastic parts when cooling. Reduces warping, make your printing platform Perfectly flat surface for printing. Flat Polished Edge for safe to handle.
This glass plate is shipped by Express.
Specifications:
Material: Borosilicate Glass
Size: 400x400x5mm
Thickness: 5mm
Warp tolerance: +/-0.2mm
Length tolerance: +/-1mm
Round angle : R5
Packing list:
1 x Glass Plate
KEENOVO Silicone Heater 400x400mm 1000W for Creality CR-10 S4 3D Printer Bed w/Screw Holes (120V)
Custom Design Welcome. If you need different heating solution and management, just tell us your requirements/applications and let our flexible thermal pros design for you. Why Keenovo Heaters? As one of the first manufacturers of flexible heaters( Silicone Heaters & Kapton Heaters) in China, we understand that the reliability of our heating elements for your devices,equipment or machines can NEVER be OVER-emphasized, and we offer best quality at reasonable prices with the following promises: a) We use ONLY Arlon silicone rubber substrate imported from the United States and authentic DuPont kapton film in production to provide the best heater performance and the longest serving life, especially at high temperatures or in long time heating process. b) We offer FREE assistance in heater design to achieve an ideal thermal heating solution for your application. A general idea of what you want is enough to turn our flexible heater design experts on working for you. c) Each and every heater is newly made to order and factory-inspected before delivery to you. KEENOVO is your right choice if you are looking for high quality heaters with 100% guarantee.
Similar items with 4 stars and above
Creality CR10 Heatbed 12V Aluminum Heat Bed with Cable and Insulation Mat Installed Well Compatible for 3D Printers Creality CR10 / CR10S Hot Bed Size 310x310x3mm
- Upgraded 2018 Which Heating Much Faster and with 12V Voltage 18A 220W
- Original Parts / Accessories Replacement for Creality 3D Printer CR-10 / CR-10S
- Hot Bed Size:310x310x3mm，Hotbed With Cable Which be Installed Well.
- We only guarantee our heater bed be used on the original creality 3D printer CR-10 and CR-10S
- if be used to the other brand modles, customers need to afford to the resonsibility by themselves, meanwhile, our warranty will not valid for this cause.
- WARRANTY: All 3D printer accessories with 12 Months Warranty and Lifetime Technical Support.
UCHOOSE, a King Professional 3D printer and Printing Parts Store.
For High Quality & Good Service, We are diligent to Do Our Best!
Note: These are original replacement parts for Creality CR-10 CR-10S 300x300x400mm ;
we only guarantee our heater bed be used on the original creality 3D printer CR-10 and CR-10S; if be used to the other brand modles, customers need to afford to the resonsibility by themselves, meanwhile, our warranty will not valid for this cause.
Specifications:
> Model: 3D Printer 2 in 1 heating bed /Black Aluminum hotbed for CR-10 CR-10S 300x300x400mm 3D Printer
> Product process: Aluminum Substrate
> Hot Bed Size: 310x310x3mm
> Voltage: 12V
> Power: 220W
Package
1 × Aluminum Hot Bed 310x310x3mm With Cable Which be installed well for CR-10 /CR-10S 3D Printer
Warranty:we only guarantee our heater bed be used on the original creality 3D printer CR-10 and CR-10S;
if be used to the other brand modles, customers need to afford to the resonsibility by themselves,
meanwhile, our warranty will not valid for this cause.
RingBuu Heat Insulation Cotton, Heat Bed Insulated Pad, 200x200mm/300x300mm/400x400mm, Hot Plate Foil Self-Adhesive Pad, Heating Bed Sticker, for 3D Printer Hot Bed (400x400mm)
- ❤ Type:Heat Bed Insulated Pad.Color: Silver. Material:Closed Cell Elastic Material. Quantity: 1Pc.
- ❤ Size:200x200mm/7.87×7.87inch(approx.),300x300mm/11.81×11.81inch(approx.),400x400mm/15.75×15.75inch(approx.)(optional).
- ❤ There are some wrinkles on the surface, which doesn’t influence use.The medium temperature is good at – 50degree-150degree.
- ❤ This product uses closed cell elastic material. It is soft, bending, cold resistance, heat resistance, waterproof, low thermal conductivity, shock absorption, sound absorption and other excellent properties.
- ❤ It is used for 3D printer hot bed, which can reduce cold and heat loss. It can be used for aluminum substrate, PCB hot bed, silica gel hot bed bottom.
Description:
100% brand new & high quality.
Features:
There are some wrinkles on the surface, which doesn’t influence use.
This product uses closed cell elastic material. It is soft, bending, cold resistance, heat resistance, waterproof, low thermal conductivity, shock absorption, sound absorption and other excellent properties.
It is used for 3D printer hot bed, which can reduce cold and heat loss. It can be used for aluminum substrate, PCB hot bed, silica gel hot bed bottom.
The medium temperature is good at – 50degree-150degree.
Specifications:
Type:Heat Bed Insulated Pad
Size:200x200mm/7.87×7.87inch(approx.),300x300mm/11.81×11.81inch(approx.),400x400mm/15.75×15.75inch(approx.)(optional)
Color: Silver
Material:Closed Cell Elastic Material
Quantity: 1Pc
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
4.No retail package
Package includes:
1Pc x Heat Insulation Cotton
(other accessories demo in the picture are not included)
nouler Juler 400X400Mm Mk3 Aluminum Plate Heating Bed PCB Board for Cr10 S4 3D Printer
Welcome to our shop, your support is our greatest motivation. All products are sold at low prices, we guarantee quality.
Description:
– Name: Hot bed aluminum substrate
– Material: aluminum substrate
– Size: 410*410*3mm
– Effective print size:400*400*3mm
– 3mm thick aluminum substrate
– Fit for Creality CR-10 S4 3D printer , accepted 12V
Package Includes:
1Pcs Aluminum Heated Bed
1Pcs Heat Insulation Cotton
Note:
Power adapter is notincluded.
DXPRO SC-3 3D Printer DIY Prusa I3 Desktop 3D Printer Print Size 300X300X400MM
- 【EASY ASSEMBLY】Delivery with three sets, you just need about 5 minutes to assemble 3d printer well.
- 【PRINTING SIZE】 3d printer prints max size is 300X300X400mm. No longer will you be limited to small models.
- 【LONG SERVICE LIFE】Imported Linear navigation with low friction. Industrial-grade PCB can continuously print for 200 hours without pressure
- 【HEATING BED】 Industrial grade aluminum alloy platform&special tempered glass to ensure the formation of flat and to prevent wear and tear. Easy to take out the model.
- 【EASY WIRING】 Wires are already connected to the control board & cables are also attached,easy for wiring.
Product Feature:
Printing Size：300*300*400mm
Printing accuracy：±0.1mm
Layer thickness: 0.05-0.4mm (adjustable)
Nozzle temp: 240 degree
Extruder temperature: PLA: 200
Hot bed temperature: PLA: 50
Printing Speed：Normal: 80mm/s, Max.: 200mm/s
Materials：1.75mm PLA
Working condition temp: 10-30℃, Humidity:20-50%
Nozzle: 0.4mm, 0.3mm, 0.2mm
Extruder quantity: 1
Molding: FDM
Body Structure: Imported V-Slot AluminumBearings
Nozzle Diameter：Standard 0.4mm
Printing Method: TF card(off-line)
screen: 2.4 inch Touch screen
Power supply: input: 110-240V output: 24V/15A
Hot bed: 4mm aluminum alloy platform, 3mmspecial tempered glass
Operating Software：CURA、Repetier-Hostsimplify 3D
Software supporting: PROE, Solid-works, UG, 3dMax, Rhino 3D design software, etc.
Cura language: English
Interface language: English
Format : STL, G-Code
Operating System: Linux, Windows, OSX
Product Size: 490*600*615mm
Package Size: 640*540*295 mm
Net Weight: 10.3kg
Gross Weight: 17.5kg
Artillery Sidewinder X1 3D Printer, 2019 Newest V4 Version Ultra-quiet Lattice Glass Heat Bed Reset Button Filament Runout Sensor & Power Failure Recovery 3D Printing, 300x300x400mm
- Exclusive Ultra-Quiet Stepper Driver – Dissipated much less heat and maintaining a higher torque comparing to other quiet stepper drivers available.
- Synchronized Dual Z System – Make sure both side of the gantry move ups and downs the same height and at the same speed, ensure the X carriage always move parallel to the build plate, even when one of the Z-stepper breaks down.
- Direct Drive Extruder – With Extruder, it makes your printer more reliable, especially for flexible filaments.
- AC Heating Platform – For quick heating. A new Lattice glass as 3d printer platform, extremely flat surface, superb adhesion, a breeze to release the printed objects, fast and steady heated curve, tested and durable.
- Power Failure Protection – Continue printing from the position where the last print was stopped during the power failure, and you can stop the continuous operation or power off.
Special Feature:
1.STRONGER, MORE STABLE SYNCHRONIZED DUAL Z SYSTEM
2.ULTRA-QUIET FASTER PRINTING SELF DEVELOPED ULTRA-QUIET DRIVER
3.MORE INTELLIGENT POWER FAILURE RECOVERY, RESTART BUTTON
4.MORE INTELLIGENT FILAMENT SENSOR, PAUSE THE PRINT AND ASK THE USER TO INSERT A NEW SPOOL
5.RAPID HEATING AC HEAT BED
6.MUCH STABLE BRANDED POWER SUPPLY UNIT
7.PRINT WITH PRECISION DIRECT DRIVE EXTRUDER
8. A NEW LATTICE GLASS AS 3D PRINTER PLATFORM, EXTREMELY FLAT SURFACE, SUPERB ADHESION, A BREEZE TO RELEASE THE PRINTED OBJECTS, FAST AND STEADY HEATED CURVE, TESTED AND DURABLE.
Specification:
Layer Resolution: 0.1mm
Frame: Aluminum Extrusion
XYZ Positioning Accuracy: 0.05mm, 0.05mm, 0.1mm
Printing Filament: PLA, ABS, TPU, Flexible Materials
Filament Diameter: 1.75mm
Nozzle Diameter: 0.4mm
Maximum Print Speed: 150 mm/s
Maximum Travel Speed: 250mm/s
Build Volume: 300x300x400 mm
Extruder Type: Direct Drive Extruder
Maximum Build Plate Temperature: 130C
Power Requirement: 110V – 240V, 600W max (with heated bed turned on)
Connectivity: USB, TF Card, USB Stick
Control Board: MKS Gen L
Nozzle Type: Volcano
Machine Dimensions: 550x405x640 mm
550x405x870 mm (with spool holder)
Package Include:
1 X Artillery Sidewinder X1 3D Printer
1 X Assembly Tool Kit
1 X Assembly Instruction
1 X Assembly Guide
3D Printing Build Surface, 3D Printer Heat Bed Platform Magnetic Sticker Square Mat 400mm x 400mm (15.75" x 15.75")
- ✤PERFACT DESIGN: Heat Bed Platform Sticker made of high quality matte surface material, it can make you easy clean removal the printed part afterward, and print directly on to the surface without any additional adhesives, tapes, or slurry.
- ✤MORE EASY: With the specially designed patterns of scaling and positioning, mark can make your DIY processing more fun and easy.
- ✤APPLICATION: Our 3D Printer heatbed platform sheet durable construction allows for multiple uses for PLA / ABS/HIPS/TPU/PC/RETT.
- ✤DURABILITY & EASY CLEAN: It is capable to work at 80ºC. Easy clean with alcohol.
- ✤MORE FLAT FOR PRECISION: Super Flatness. Fast and uniform heating. More precise on printing, especially the bottom of the prints.
Description:
Have you ever faced this problem? When you finished the 3D printing model, it took a lot of effort to separate
the model from the board. In the process, you may break the model or the blade may even hurt yourself. This
product will help avoid all these issues.
Specification:
Available for PLA / ABS/HIPS/TPU/PC/RETT
Max temperature: ≤80℃
Four characteristics:
a. Separable platform, simple model removal
b. No need for blade, glue, textured paper
c. Flexible platform
d. Paste firmly
Package listing:
1* Print Bed Tape（400mm*400mm）15.75″ x 15.75″
Conclusion
By our suggestions above, we hope that you can found heating bed 3d printer 400 x 400 mm for you.Please don’t forget to share your experience by comment in this post. Thank you!
