The Best Dewalt Hand Grinder Disks

The DEWALT DWE4012 7 Amp 12,000 RPM Paddle Switch Small Angle Grinder features a 7.5 Amp AC/DC, 12,000 rpm motor designed for faster material removal and higher overload protection. The One-Touch Guard allows for a single action to adjust the guard; no buttons or levers, just turn the guard to position it. A hex wrench replaces spanner wrench, which makes it more user friendly as a hex wrench is found in most tool boxes if lost. Its low profile, jam-pot gear case increases durability and allows tool to fit into tight spaces, and the Quick-Change Wheel Release allows tool free wheel removal without need for a wrench. This grinder has a 2-position removable side handle provides increased comfort and control. It also offers a slim, ergonomic body design that provides increased comfort in extended use applications. The 5/8″-11 spindle thread accepts a wide range of 4-1/2″ accessories. Includes: 2-position side handle, Depressed center wheel, One-Touch Guard, Hex Wrench.

This 5 in. Brushless Surfacing Grinder Kit with Kickback Brake is equipped with a brushless motor to eliminate brush replacements, reducing downtime. It also features a brake that stops the wheel quickly. PERFORM & PROTECT features on this tool include Kickback Brake and E-CLUTCH to help enhance user protection without impacting performance. The electronic Kickback Brake engages when a pinch, stall, or bind-up event is sensed, engaging with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut the motor off POWER-LOSS RESET – The ON/OFF trigger switch has a no-volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart tool. Includes: 5 in. Brushless Surfacing Grinder Kit w/ Kickback Brake – DWE46253,Grinder,Side Handle,Hex Key,Inner and outer flange,Bail Handle – DWE46005,5 in. Surfacing Shroud,5 in. Surfacing Wheel – DW4777T,5 in. Type 27 guard.

The DEWALT DWE43116 4-1/2″- 5″ high performance trigger switch Grinder shuts the Grinder off in less than a tenth of a second when a wheel pinch or wheel stall occurs, extending the life of the gears and motor. The dust Ejection system™ technology provides durability by ejecting damaging dust and debris that enter through the air intake vents for extra protection. This unit also comes with 3 different type 27 guards. Specs: 13 amp motor, 9,000 RPM rating, trigger switch, 1700 max watts out, 2.3 HP, tool-free flange system, overload protection, tool weight = 5.7 lbs. Backed by DEWALT’S 3 year limited warranty. Includes: 1) Grinder, 1) side handle, inner and outer flange, 1) 4.5″ type 27 guard, 1) 5″ type 27 guard, 1) 6″ type 27 guard.

The DEWALT DW840K 7-Inch Angle Grinder with Bag and Wheels. This grinder features a 13.0 Amp AC/DC, 8,000 rpm motor which provides high power and speed for 7″ grinding applications. It has a high power-to-weight ratio for greater efficiency and reduced user fatigue. The adjustable guard can be adjusted to redirect sparks away from user. Rear handle design for greater comfort and control, and external brush caps for easy servicing. The sealed ball and roller bearings allow for extended motor life. A spindle lock button allows for single-wrench bit changes. Includes (5) Grinding Wheels, Wrench, Backing Flange, Adjustable Guard, 2-Position Side Handle, Carrying bag.

The DEWALT DWE402 4-1/2″ 11-amp Paddle Switch Angle Grinder features the next generation 11 Amp AC/DC 11,000 rpm motor, which provides the best power to weight/size ratio available (1.8HP). It’s Dust Ejection System provides durability by ejecting damaging dust and debris particles that enter the tool. The oversized brushes provide 2X brush life over previous model (D28402) and the large spiral bevel gear provides long transmission life. This grinder offers a One-Touch guard that allows for 360 degree rotation of the guard with a single action. The Quick-Change wheel release allows tool free wheel removal without need for a wrench. It has a top mounted and protected spindle lock button that maximizes the depth of cut without compromising durability. The uniquely small gripping surface in this power class allows for the best comfort available in this class. It also offers a newly designed side handle which provides excellent ergonomics while oversized threading provides durability. Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage and a paddle switch with safety lock-off prevents accidental start up. Matching wheel flanges allow the use of common accessories. Includes: (1) 2-position side handle, (1) 4-1/2″ One-Touch (T27) Guard.

The DEWALT DCG414T1 FLEXIBLE 60V MAX* Grinder Kit with kickback brake features FLEXVOLT technology; the world’s first battery that automatically changes voltage when you change tools. The flexible battery is backwards compatible with our 20V MAX* tools so you get up to 4X the runtime. (**With FLEXVOLT 60V MAX* battery when used with DEWALT 20V MAX* tools.) You can slide the battery into a whole new lineup of 60V MAX* and 120V MAX* tools from DEWALT. This grinder features a brushless motor that is designed to deliver the run time and performance for demanding applications, giving you the power you need to cut and grind. (13Amp equivalent motor as compared to a D28144 corded unit). The kickback brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder, and shut the grinder off. The brake slows wheel to a stop when trigger is released – e-clutch activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor. A two-stage trigger helps to reduce accidental startup. 9,000 RPM speed allows the use of 4-1/2” to 6” wheel capacity. Kit includes: (1) DCG414 Grinder, (1) DCB606 FLEXVOLT Lithium Ion battery, (1) fast charger, (1) side handle, (1) 4-1/2″ (115mm) Type 27 wheel, (1) 4-1/2″ (115mm) Type 27 guard, (1) 6″ (150mm) Type 27 guard, wrench, flanges, and kitbag

Product Description

Featuring high-tensile, heat-treated carbon or stainless steel wire, DeWalt HP wire wheels offer long-lasting, aggressive brushing action. An innovative internal holding plate construction provides helps to reduced knot movement and helps to increased control and brush life. Delivers smooth performance, with crimped wire for flexibility.

Amazon.com

The DEWALT DW4930 Cable Twist Wire Wheel consists of .020-inch carbon wire that is 100 percent inspected by the manufacturer for consistency, smooth performance, balance, and safety. The high-quality wire grades are constructed with an internal holding plate for perfect balance and consistent performance. Use the DW4930 wire wheel with 5/8-inch arbor for deburring, edge blending, rust removal and surface preparation. With a maximum speed of 20,000 RPM, the DW4930 can handle even the toughest jobs with ease.

See all Product description

The DEWALT DWE4011 eatures a 7.0 amp AC/DC, 12,000 rpm motor, which was designed for faster material removal and higher overload protection. The One-Touch Guard eliminates the need for a tool to adjust the guard location; No buttons or levers, just turn the guard to position it. This unit has a hex wrench which replaces the spanner wrench (a hex wrench is found in most tool boxes if lost). It also features a quick-change wheel release that allows for tool-free wheel removal without need for a wrench. As an added bonus, the two-position removable side handle provides increased comfort and control. To make this tool more versatile, the 5/8-inch-to-11-inch spindle thread accepts a wide range of 4-1/2-inch accessories. You will enjoy working with this slim, ergonomic body design as it provides increased comfort in extended use applications.

The DEWALT DWE4214 4-1/2″ 11amp Angle Grinder Slide features an 11 Amp AC/DC 11,000 RPM motor designed for faster material removal and higher overload protection. It has a dust ejection system which provides durability by ejecting dust and debris particles that enter the tool through the air intake vents. A low profile gear case allows access into tight spaces, and a quick-change wheel release allows tool free wheel removal. This grinder has a One-Touch guard that allows 360 degree rotation of the guard with a single action, along with a Lock-On slide switch provides increased user comfort in extended use applications. Matching wheel flanges allow the use of most common accessories.

The DEWALT DWE4887 1-1/2″ Die Grinder features a 4.2 Amp, 25,000 rpm motor which provides high power and speed for all 1-1/2″ grinding applications. This tool also has AC/DC capacity that works off welding machines and generators for increased productivity and versatility. It offers a convenient paddle switch with lock-on button for easy gripping – lock-off prevents accidental start ups. This grinder is designed with a single piece collet and nut for hassle free accessory changes – a precision 1/4″ collet securely holds all proper accessories (1/8″ reducing sleeve as optional accessory). An angled exhaust path directs debris away from user and the small body diameter provides comfortable gripping area. Amp capacity is 4.2 amps, with a no load speed up to 2,500 rpm. Includes: (2) Wrenches, (1) 1/4″ collet.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Dewalt Hand Grinder Disks, eg:

• What are Top 10 Dewalt Hand Grinder Disks for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Dewalt Hand Grinder Disks to buy?
• What are Top Rated Dewalt Hand Grinder Disks to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Dewalt Hand Grinder Disks?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Dewalt Hand Grinder Disks.
• Before deciding to buy any Dewalt Hand Grinder Disks, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Dewalt Hand Grinder Disks and What you should consider when buying the Dewalt Hand Grinder Disks and Where to Buy or Purchase the Dewalt Hand Grinder Disks. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Dewalt Hand Grinder Disks of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Dewalt Hand Grinder Disks.