owneaster Finding your suitable readers for autoiq ninja replacement blade is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for autoiq ninja replacement blade including detail information and customer reviews. Let’s find out which is your favorite one.
852 reviews analysed
Blender Replacement Parts 7 Fins Bottom Blade For Nutri Ninja Auto iQ BL480 BL642 NN102 BL682 BL2013 BL680A BL682 BL491 BL640 BL642 Nutri Blender Parts (7 Fins-4 Inch)
- PLEASE CHECK – please check your existing blade for the following 1) Count the FINS IT SHOULD BE 7-FINS. 2) 3.94″ (10cm) Diameter.
- Compatible with Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102
- Packing include: 1×7 Fins Bottom Blade Assembly, 2 x Replacement Gasket Rubber (One Gasket Rubber already in the blade )
- Important Tips-Note1: The rubber gasket in bottom blade maybe loosened during transportation. Before using the bottom blade, please check the rubber gasket and be sure it is put snugly into the replacement bottom blade.Note2: Please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade, if you’re going to use this replacement gasket.
- Desiged for:Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012 etc,
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender.
KIND REMINDER BEFORE PURCHASE:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102,
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
TIPS FOR USAGE
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 6 Fins Replacement Extractor Blade for Nutri Ninja Blender Blade Assembly Fits Nutri Ninja Auto-iQ BL450-70 BL451-70 BL482-70
- 【Apply To】The 6 Fins Blade is suitable for Nutri Ninja Auto iQ BL450-70,BL451-70,BL454-70,BL456-70,BL480-70,BL480D-70,BL481-70,BL482-70,BL490-70,BL487-70,BL488W-70,BL487A-70,BL486CO-70,BL491-70,BL492-70,BL492W-70 (Only fit for 12oz,16oz, 24oz, 32 oz cup).
- 【High Quality】Ninja Extractor Replacement Blade is made of Food-grade BPA material & stainless steel, high hardness brings qualified anti-corrosion performance. Moreover
- The outer is made of durable PP material, Not easy to break and scrape.
- 【Important Notse】Note 1: The Rubber gasket in bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. Note 2: If you’re going to use this replacement gasket, please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade.
- 【Packing Include 】1 x 6 Fins Bottom Blade Replacements, 1 x Replacement Gasket Rubbers ( One Gasket Rubber already on the 6 Fins replacement blade). Please make sure your Ninjia blender base has 6 Fins before order !
- 【Perfect After-Sales】Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service as we can.
Blender Bottom Blade Assembly 7 Fins and 1 Gasket Rubber Replacement Parts Compatible with Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Extractor Blade Replace 409KKU641
- ✅[Ideal Replacement]: Want Blender 7 Fins Blade Assembly Replacement that matches the original, for far less than going back to the dealership? This Blender Blade was specifically designed to look and function the same as the original. While this is NOT a original part, it is a direct replacement and it will appear, fit and work like the factory part.
- ✅[Package included]: 1 x 7 Fins Blender Blade Assembly, 1 x Extra Gasket Rubber.
- ✅[Direct Fit]: Direct replacement for a proper fit and easy installation, quality materials used, meets or exceeds OEM standards, 100% tested before shipping.
- ✅[Appliance Model]: Fit for Nutri Ninja Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680, BL680A, BL682, CT640C, CT641, CT680, CT680A, CT680SS, CT680W, CT682SP, NN100, NN100A, NN101, NN102 (Only fit for 18oz, 24oz, 32oz cups, NOT FIT FOR 16oz). Please verify your blender models and your original motor base is 7-fins before purchasing!
- ✅[Buy with Confidence]: We offer 3 MONTHS WARRANTY, true worry-free shopping experience. If the Blade ever fails on your Blender simply contact us.
Specification:
Brand: BTNTVEN
Condition: 100% Brand New and never used
Package Includes:
1 x 7 Fins Blender Blade Assembly, 1 x Extra Gasket Rubber.
Fits The Following Nutri Ninja Blender Models :
For Nutri Ninja BlendMax DUO with Auto-iQ Boost (BL2012, BL2013)
For Nutri Ninja Auto-iQ (BL480, BL480D, BL481, BL482)
For Nutri Ninja Auto-iQ Complete Extraction System (BL486CO)
For Nutri Ninja Auto-iQ Pro Complete (BL487, BL487A, BL488W)
For Nutri Ninja Auto-iQ Blender (BL490)
For Nutri Ninja Auto-iQ System (BL491, BL492)
For Nutri Ninja Auto-iQ Compact System (BL492W)
For Nutri Ninja Ninja Blender DUO with Auto-iQ (BL640, BL641, BL642, BL642W, BL642Z)
For Nutri Ninja Blender System with Auto-iQ (BL680, BL680A, BL682)
For Ninja Intelli-Sense Blender Duo (CT640C, CT641)
For Ninja Intelli-Sense Kitchen System (CT680, CT680A, CT680SS, CT680W)
For Ninja Intelli-Sense Kitchen System with Auto-Spiralizer (CT682SP)
For Nutri Ninja Nutri Bowl DUO with Auto-iQ Boost (NN100, NN100A, NN101, NN102)
If you have any problem about your order, please feel free to contact us.
Blender Replacement Parts Ninja Bottom Blade 7 Fins and 1 Gasket Rubber for Nutri Ninja Auto iQ BL482 BL642 NN102 BL682 BL2013 Nutri Ninja Blender Auto iQ Blade （7 fins）
- 【Ninja Blade Apply To】The 7 Fins Ninja Blade is suitable for Ninja Auto iQ BL2012, BL2013, BL455-30, BL480, BL480D 30, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL494, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102 (Only fit for 18oz, 24oz, 32oz cup not fit for 16oz).
- 【Important Note】Note 1: The Rubber gasket in bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. Note 2: If you’re going to use this replacement gasket, please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade.
- 【NOT COMPATIBLE】 IF ¡°DOB¡± is listed after the model number on the base of the blander food grade PP and stainless steel .
- 【Nutri Ninja Replacement Parts】 – Pro Extractor Replacement Blade by Best Potok. 7 Fins, 4″/10CM diameter, 165g, made of food grade PP and stainless steel .
- 【Packing Include】1 x 7 Fins Bottom Blade Replacements, 1 x Extra Gasket Rubbers (Please make sure your Ninjia blender base has 7 fins before order.)
One Ninja replacement blade assembly (7-fin as pictured) for Nutri Ninja Blender.
Fits NUTRI NINJA r BL487 BL487QPL BL488W BL490 BL491 BL492 BL492W BL640 BL641 BL642 BL642W BL642Z BL680 BL680A BL682 BL450-30, BL451-30, BL454-30 & BL456-30.
BEFORE PURCHASING please check your existing blade for the following:
1: Your original motor base must be 7 fins. The Nutra Ninja Replacement Blade can’t fit all the 7 fins blender’s motor base: there are too many models of ninja blender blade, if the last two digitals(not part of model #) or any character is difference, please don’t purchase it
2: Your blender model must be identical with our stated model.”ONLY COMPATABLE WITH” 7 fins model Auto iQ BL2012, BL2013, BL480, BL480D, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102, BL2012.
NOT FIT FOR BL660, BL663, BL740, BL770, BL771,BL773CO, BL780, BL780,BL820,BL830,BL450,BL451-70,BL454-70,BL482-70. Please check your model carefully before purchasing.
Pay attention to before use:
1. You are recommended to replace your ninja blender every 6 months or as needed for optimal performance
2. Please check whether the gear of the bottom loosen or tighten before use. If it’s loosen, please tighten it
3. Please check the rubber gasket and be sure it is put snugly into the bottom blade. (The rubber gasket is used to avoiding leakage）
4. Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line
5. Place the replacement blade onto the cup and screw it tightly until you have a good seal
6. Please make sure it in right place and locked tightly
7. Do not run your blender over 4 minutes at a time to prevent overheating of the blender
BLEND PRO Replacement Nutri Ninja 24 oz Cup with Sip & Seal Lid – For Blender BL450 BL454 Auto-iQ BL480 BL481 BL482 BL687 (2-Pack)
- Premier Cups for Nutri Ninja 24 oz Cup with Sip & Seal Lid
- compatible with Nutri Ninja BL480 BL490 BL640 BL680 Auto IQ Series blenders
- All components are BPA free and dishwasher safe
- 100 satisfaction guaranteed or your money back
- ! ! be aware ! ! only seller BLEND PRO sells genuine BLEND PRO parts covered by
Blend Pro 24 oz Cups For Nutri Ninja Blender With Sip & Seal Lid 2-PACK
Ninja Mega Kitchen System (BL770) Blender/Food Processor with 1500W Auto-iQ Base, 72oz Pitcher, 64oz Processor Bowl, (2) 16oz Cup for Smoothies, Dough & More
- 72 oz. Total crushing pitcher pulverizes ice to snow in seconds for creamy frozen drinks and smoothies.
- 8-Cup food processor bowl provides perfect, even chopping and makes up to 2 lbs. Of dough in 30 seconds.
- Two 16 oz. Nutri Ninja cups with to-go lids are perfect for creating personalized, nutrient-rich drinks to take on the go.
- Dishwasher-safe and BPA-free parts..Includes one 1500-watt base, A food processor bowl, 72 oz. Total crushing pitcher, two 16 oz. Nutri Ninja cups with to-go lids, and a 30-Recipe inspiration guide.
- For best results, try the Nutri Ninja cup or X-Large pitcher for frozen drinks.If you choose to clean the unit by hand, please do so with warm water & dish soap
The Ninja mega kitchen system comes packed with 1500 watts of power to handle all of your drink and meal-making needs. The XL 72 oz*. blender pitcher features total crushing technology to blast through ice and frozen fruit. Two 16 oz. Nutri Ninja Cups with to-go lids are perfect for creating personalized, nutrient-rich drinks to take on the go. The 8-Cup food Processor bowl comes equipped with a chopping blade for perfect, even results and a dough blade that can mix up to 2 lbs. Of dough in 30 seconds!
Ninja Blender Replacement Parts Vodche Ninja Bottom Blade 7 Fins Replacement Extractor Blade Parts for Nutri Ninja Blender Blade Assembly Fits Nutri Ninja Auto-iQ BL482 BL642 NN102 BL682 BL2013
- 【Apply To】The 7 Fins Ninja Blade is suitable for Ninja Auto iQ BL2012, BL2013, BL455-30, BL480, BL480D 30, BL481, BL482-30, BL486CO, BL487, BL487A, BL488W, BL490, BL491, BL492, BL492W, BL494, BL640, BL641, BL642, BL642W, BL642Z, BL680A, BL682, NN100, NN100A, NN101, NN102 (Only fit for 18oz, 24oz, 32oz cup not fit for 16oz).
- 【High Quality】Ninja Extractor Replacement Blade is made of Food-grade BPA material & stainless steel, high hardness brings qualified anti-corrosion performance. Moreover
- The outer is made of durable PP material, Not easy to break and scrape.
- 【Important Notse】Note 1: The Rubber gasket in bottom blade maybe will loosen during transportation. Please check the gasket and make sure it is put snugly into the replacement bottom blade before using it. Note 2: If you’re going to use this replacement gasket, please TAKE OFF the PRE-INSTALLED GASKET in the bottom blade.
- 【Packing Includ 】1 x 7 Fins Bottom Blade Replacements, 1 x Extra Gasket Rubbers (Please make sure your Ninjia blender base has 7 fins before order.)
- 【Perfect After-Sales】Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service as we can.
Ninja Replacement 6 Blade For 72 Ounce XL Pitcher All Auto IQ 1200 1300 1500 WattModels
Genuine Ninja BladeWill work on all Ninja 72 ounce pitchers.Razor Sharp, Handle with Care.
Blendin 2 Pack 32 Ounce Cup with Sip N Seal Lids,Fits Nutri Ninja Auto-iQ 1000W and Duo Blenders
- Fits Nutri Ninja Kitchen Systems Auto IQ and Duo Blenders
- These have 4″ diameter. Does NOT fit Ninja Blenders that have a 3″ 16 Ounce Cups.
- Models it fits are BL480 BL481 BL482 BL490 BL640 BL680 BL450 BL482 BL682 BL642 BL640
- Includes Two 32 oz. Cups and Two Sip N Seal Lids
- Compatible with the BL450 Series, BL480 Series, BL640 Series, CT640 Series, and CT680 Series.
These have 4″ diameter. Does NOT fit Ninja Blenders that have a 3″ 16 Ounce Cups. Includes Two 32 oz. Cups and Two Sip N Seal Lids. Fits Nutri Ninja Kitchen Systems Auto IQ and Duo Blenders. Compatible with the BL450 Series, BL480 Series, BL640 Series, CT640 Series, and CT680 Series such as BL480 BL481 BL482 BL490 BL640 BL680 BL450 BL482 BL682 BL642 BL640. Does NOT fit Ninja Blenders that have a 3″ 16 Ounce Cups. Includes Two 32 oz. Cups and Two Sip N Seal Lids
Nutri Ninja Personal and Countertop Blender with 1200-Watt Auto-iQ Base, 72-Ounce Pitcher, and 18, 24, and 32-Ounce Cups with Spout Lids (BL642)
- Auto-iQ Technology features timed, intelligent blending programs that do the work for you, no guesswork required!
- XL 72 oz. Total Crushing Blender pulverizes ice to snow in seconds for creamy frozen drinks and smoothies
- Nutri Ninja Pro Extractor Blades break down whole fruits, vegetables, ice and seeds for maximum nutrient &
- vitamin extraction
- Small, Regular, and Jumbo Multi-Serve Nutri Ninja Cups with Sip &
- Seal Lids for nutrient-rich Super Juices on-the-go
- 1200 Watts/2 HP of Professional Performance Power
Conclusion
By our suggestions above, we hope that you can found Autoiq Ninja Replacement Blade for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Autoiq Ninja Replacement Blade, eg:
- What are Top 10 Autoiq Ninja Replacement Blade for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Autoiq Ninja Replacement Blade to buy?
- What are Top Rated Autoiq Ninja Replacement Blade to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Autoiq Ninja Replacement Blade?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Autoiq Ninja Replacement Blade.
- Before deciding to buy any Autoiq Ninja Replacement Blade, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Autoiq Ninja Replacement Blade and What you should consider when buying the Autoiq Ninja Replacement Blade and Where to Buy or Purchase the Autoiq Ninja Replacement Blade. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Autoiq Ninja Replacement Blade of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Autoiq Ninja Replacement Blade.
