owneaster 
Nowadays, there are so many products of blinker genie in the market and you are wondering to choose a best one. You have searched for blinker genie in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings blinker genie which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
19,676 Reviews Scanned
iBrightstar 9-30V Flashing Strobe Blinking Controller Flasher Module for LED Brake Light Tail Stop Light High Mount/3rd Brake Lights – 2Pack
- This small block controller can enhance your brake light function with 4 times fast-blinking and 4 times slow-blinking and then turn stable solid light. Improve traffic safety warning, to avoid rear-end accident.
- Working Voltage: 9-30V, will suitable for all motor vehicles, cars motorcycle tank armored vehicles electric bicycle and other LED lights.
- Complete sealed technology make it waterproof, short circuit prection.
- Easy to install. Black wire — Negative Pole
- Red wire — Positive Pole.High quality and strictly controlled system for durable and highly performed use.
- Note:iBrightstar LED are strictly tested for sale!!! We offer fully ” ONE YEAR ” guaranteed for manufacturer defect.
Kuryakyn 4709 Motorcycle LED Lighting Component: Diode Kit Wire Assembly for Metric Motorcycles with Single Turn Signal/Blinker Indicator Light on Dash
- Required when installing L.E.D. lights as turn signals on a motorcycle with a single turn signal indicator light on your dash
- If not installed, power will back-feed across the indicator light and all turn signals will flash at once
- Includes (1) Diode wire assembly and (1) 6″ ground wire – black
- Suggested tools for installation (not included): wire stripper/cutter, soldering iron, solder, heat shrink
- Compatible with models containting a signal turn indicator bulb on dash
- Recommended for use when incandescent signal bulbs are replaced with LED signals
The Kuryakyn 4709 Diode kit is required when installing L.E.D. lights as turn signals on a motorcycle with a single turn signal indicator light on your dash. If not installed, power will back-feed across the indicator light and all turn signals will flash at once. Includes (1) Diode wire assembly and (1) 6″ ground wire – black; suggested tools for installation (not included): wire stripper/cutter, soldering iron, solder, heat shrink. The Kuryakyn 4709 Diode kit is compatible with models containting a signal turn indicator bulb on dash; recommended for use when incandescent signal bulbs are replaced with LED signals.
Philips 4157NA LongerLife Miniature Bulb, 2 Pack
- Twice the life of standard incandescent bulbs
- Best value
- Original equipment quality seal for the most reliable performance
- Always replace in pairs to ensure a symmetric light beam from both bulbs on the road. Bulbs dim over time.
- Miniature bulbs by Philips, for over 100 years we have been continuously innovating automotive lighting
- When installing a new bulb, never touch the glass. Either use gloves or paper towel when handling.
iBrightstar Newest 9-30V Super Bright Low Power 3156 3157 3057 4157 LED Bulbs with Projector Lenses Replacement for Front/Rear Turn Signal Blinker Lights or Brake Tail Parking Lights, Amber Yellow
- (Set of 2 Bulbs)54SMD 3014 & 3SMD 3030 high brightness chips per bulb,Working Voltage:9v-30v (fit 12V, 24V vehicles),Size: 1.82″x 0.88″ x 0.67″
- Fits:3056 3057 3057K 3057LL 3155 3157 3157A 3157K 3157NA 3157NAK 3157LL 3156NA 3156A 3156 3156K 3356 3357 3357K 3357KNA 3357LL 3457 3457-NA 3457K 3457NAK 3757AK 3757ALL 4157 4157LL 4157K 4157NA 4157NAK etc.Easy installation, plug and play.
- Application: Turn Signal Lights,Brake Lights,Tail Lights,Side Marker Lights,Corner Lights,Blinker Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
- Advantage: Non-polarity design,Compatible for both CK/SRCK and Standard socket. More than 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution,built in Constant Current IC for Longer life span & Low Power Consumption.
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
This bulb is compatible for both CK/SRCK and standard socket with Non-polarity design. Best value in the market!
Features
Dual Brightness: The Dim mode is Tail lights or DRL, while the Bright mode is Brake lights or Turn Signal lights.
High Brightness LED: 54SMD 3014 chipset & 3SMD 3030 chipset.
Working Voltage: 9-30V (fit 12V, 24V vehicles).
Output Wattage: 4W/bulb (Low Power Consumption).
Color: Amber Yellow.
Service Life: Up to 30,000 Hours.
Note: The 50w 6ohm Load Resistor or Flash Relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
IMPORTANT NOTICE! Please confirm the bulb base before placing an order.
iBrightstar is a registered brand with Amazon. Please contact us if there is any questions or other requests!
Custom LED Blinker Genie for Motorcycles – Converts 2-Wire LED to 3-Wire for Run AND Turns (pair)
- Sold as a PAIR. Comes as a complete kit with electrical connectors and detailed instructions. OEM turn signal connectors available for a plug and play install (sold separately). 1-year Warranty & Satisfaction Guarantee! Manufacturer direct purchase! Made in the USA!
- Low on-state resistance means your indicators will be as bright as possible! Works with LED or incandescent indicators. Built-in Stage I Load Equalizer helps prevent the no-blink or 4-way blink condition (additional accessories may be required on some motorcycles).
- Maximum Recommended Indicator Load: 2A (30W) Maximum Switching Current: 12A Internal Resistance: 0.18 OHMS Maximum Switching Speed: 1Mhz Switch type: Advanced Power Mosfet. ONLY functions with a Negative Ground System (most common).
- The Blinker Genie requires a properly functioning turn signal system to operate properly. This means you may also need Load Equalizers or an LED flasher relay such as our ELFR-1, to maintain a functioning turn signal system after your blinker modifications.
- Designed for Motorcycles, for Automobiles with switchable running light circuits, use our new “Blinker Genie 2”
The Custom LED “Blinker Genie” is designed to allow single filament light bulbs, single intensity LED assemblies, or any two-wire indicators to function as both running lights AND blinkers – at full brightness! Simply connect your two-wire incandescent or LED indicators on your motorcycle to the Custom LED Blinker Genie, and your indicator bulbs/LEDs will now stay on constantly as running lights, and blink when you engage the blinkers! (Note: the indicator will turn off for the duration of the blinker pulse – this is how the blinking is achieved.) The Custom LED Blinker Genie is designed to be as small as possible while being as versatile and robust as possible. The finished dimensions of the unit will measure less than 0.7″ x 1.25″ X 0.25″ and can carry up to 12A of current (see specifications)! This ensures our product will work for any application (blinking your headlights individually, or powering one single LED signal for instance). To further ease installation and ensure dependability, the Custom LED Blinker Genies are water resistant. The Blinker Genie is applicable for any and all situations where a single filament lamp, or single brightness LED or LED cluster is desired to function as both a running light and a blinker light – provided that the running light will be on anytime you use the blinkers. This is always the case with motorcycles, but not necessarily with automobiles. For Automobile applications, please use our NEW “Blinker Genie 2”. One Blinker Genie controls up to 2A worth of indicators on a single blinker circuit in the recommended configuration. The Blinker Genies are sold IN PAIRS. One will be required for each side of the motorcycle, for every 2A worth of switched indicator load (25W). For more product information, visit our company website. Amazon does not provide enough space for us to list all information.
Blinker Genie 2 – For Automobiles. Converts 2-wire LED to 3-wire for Run AND Turn!
- Allows for Run AND Turn operation of Single-Intensity lamps on automobiles. Works with LED or incandescent lamps.
- Specifically designed for Automobiles that have switchable running light circuits. High-Power capacity of 2A/ 25 Watts.
- Comes as a complete kit with electrical connectors and detailed instructions. High-speed solid state design is compatible with all flasher relay patterns.
- Low on-state resistance means your indicators will be as bright as possible. Manufacturer direct purchase.
- 1-Year Warranty & Satisfaction Guarantee. Made in the USA. Sold as a PAIR.
The Blinker Genie for Motorcycles has been a huge success, but was not ideal for use on automobiles. We have now designed this Blinker Genie specifically for Automobiles called the “Blinker Genie 2”. The Blinker Genie 2 – for Automobiles – is designed to allow single filament light bulbs, and single intensity LED lamps, to function as both running lights AND blinkers – at full brightness! Properly connect any two-wire incandescent or LED lamp(s) to the Custom LED Blinker Genie 2, and your lamps will now function as both running lights and turn signals! Each Blinker Genie 2 controls up to 2A (25 Watts) worth of indicator lamps in the recommended configuration. This ensures our product will work for a wide variety of situations and indicator lamp types. The Custom LED Blinker Genie 2 is designed to be as small as possible while being as versatile and robust as possible. The finished dimensions of the unit will measure less than 0.7″ x 2.5″ X 0.25″, and it is water resistant for reliable operation. Operation: Running Lights OFF: The Blinker Genie 2 will pass voltage from the turn signal input to blink the connected lamps on. The lamps will remain off if the blinker is not engaged. Running Lights ON: The Blinker Genie 2 will pass voltage from the running light input to power the lamps as running lights, and will blink the lamps off anytime there is voltage on the turn signal input. This way, in any input scenario, the functions of run and turn are achieved. The Blinker Genie 2 has 7″ wire leads, all required electrical connectors and detailed installation instructions. You will most likely experience the fast-blink rate if you use the Blinker Genie 2 on your automobile to control an OEM blinker lamp. Additional accessories may be necessary. Please read more about these important accessories, and view the installation instructions on the manufacturers website (Custom LED).
Solar Circuits LED Turn Signal Wiring Circuits – Converts 2-Wire LED to 3 for Running Light AND Turn Signals (pair)
- Converts 2 Wire LED Lights into 3 wire hook-up
- Adds full intensity running light with Off to On turn signal function
- Can also be used for dual color running lights/turn signal lights
- Works great with White/Amber LED strips to create white DRL with Amber turn signal
- Dual color operation of Solar Circuits: When turn signal is activated, the circuit will make the lights alternate between colors (running light and turn signal)
Solar Circuits LED Turn Signal Wiring Circuits
Solar Circuits are dual function wiring relays that convert any single intensity LED light strip or cluster into a dual intensity with the advantage of full brightness running light that will blink off and on as a turn signal. They also work on dual color LEDs where one color is used as running lights and the other as turn signals. These circuits are commonly used with dual color white/amber LEDs to achieve white Daytime Running Lights with Amber turn signals. Works with any size LED up to 33mA. Works great on any motorcycle front turn signal application or wherever you need a single intensity bulb to function as a dual purpose light. Sold in pairs.
Fits:
12V DC Applications
Easy installation. Wiring diagram for both single color and dual color LEDs included.
Features:
– Converts 2 Wire LED Lights into 3 wire hook-up
– Adds full intensity running light with Off to On turn signal function
– Sold in Pairs
– Can also be used for dual color running lights/turn signals lights
– Works great with White/Amber LED strips to create white DRL with Amber turn signal
– Dual color operation of Solar Circuits: When turn signal is activated, the circuit will make the lights alternate between colors (running light and turn signal)
Custom LED Blinker Genie – Pre-Wired for 2015+ Yamaha YZF-R1 & R1M
- This Custom LED Blinker Genie harness allows for Run AND Turn operation of the OEM Pilot Lights on the 2015+ YZF-R1 and R1M.
- Complete plug-and-play harness with OEM connectors – no cutting/splicing and fully reversible (note: mirror block-offs must be purchased elsewhere if you wish to remove the mirrors).
- This kit comes with the Harness shown in the pictures, and instructions for installation. Mirror block-offs shown in first animation are NOT included.
- Works with or without the OEM mirror lamps (note: purchase the Yamaha 3-Wire Connector Y-Splitters (P/N: CL-YT3W-1-SPLIT) if you wish to use the mirror lamps also).
- Fully compatible with the R1 & R1M electronics – no fast-blink rates or error messages.
This variation of our Blinker Genie is designed specifically for the 2015+ Yamaha YZF-R1 & R1M to allow the OEM Pilot Lights to function as run and turn – commonly known as the “DRL Mod”. The kit is 100% plug-and-play and fully reversible! This kit can be used with or without the OEM mirror blinkers as well! Purchase our Yamaha turn signal Y-Splitters if you wish to use the OEM or aftermarket blinker lamps in conjunction with the Pilot Lights.. View illustrated installation instructions here: https://cdn.shopify.com/s/files/1/0190/4226/files/2015_YZF-R1_Blinker_Genie_Instructions.pdf?7009
ESUPPORT 4 x Universal 12V Motorcycle Turn Signal LED Load Resistor Flash Blinker Fix Error
- Made of high quality materials, these in-line resistors are durable and can be used for a long time.
- Dimensions:approx. 53 x 9 x 9 mm, Voltage:DC 12V, Power: 10W.
- Bullet connectors for easy installation, fitted to led indicators/flasher/turn signal.
- Slows down the flash rate when moving from bulb to LED indicators.
- Helps to solve LED related turn signal problems such as hyper flashing, no flashing or burnt out bulb indications.
1.Slows down the flash rate when moving from bulb to LED indicators
2.Adapt your existing relay unit instead of replacing original equipment. 3.One resistor is required per indicator on most bikes, but some bikes might require more than one per indicator depending on the original wattage and other aftermarket LED indicators/resistors fitted.
4.Bullet connectors for easy installation 5.2 x Resistors Supplied for either Front or Rear (2 sets required if you have LEDS on front & rear of bike)
Package Include:
4 x LED Indicator Resistor
Similar items with 4 stars and above
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy blinker genie, eg:
- What are Top 10 blinker genie for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 blinker genie to buy?
- What are Top Rated blinker genie to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) blinker genie?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for blinker genie.
- Before deciding to buy any blinker genie, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose blinker genie and What you should consider when buying the blinker genie and Where to Buy or Purchase the blinker genie. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 blinker genie of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about blinker genie.
Conclusion
By our suggestions above, we hope that you can found blinker genie for you.Please don’t forget to share your experience by comment in this post. Thank you!
