owneaster 
Nowadays, there are so many products of burst proof ice maker hose in the market and you are wondering to choose a best one. You have searched for burst proof ice maker hose in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings burst proof ice maker hose which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
TT FLEX Flexible Certified Appliance stainless steel braided ice maker hose Connector,1/4"comp1/4"comp,6FT
- 6′(72’’) LONG, one 1/4″ Compression Thread x 1/4″ Compression Thread Stainless Steel Braided Ice Maker Installation Kit.
- Easy to Install.Use to connect most refrigerator ice maker in-line filters.
- 800 PSI Burst Pressure. North America Quality Insurance.
- Manufacturing Ice Maker hose, Stainless Steel Braided Hose, Ice Maker supply hose.
- 304 Stainless Steel series. BRASS nuts, BRASS inserts, AB-1953, NSF-61 certification and UPC/CUPC approved.
Manufacturing Ice Maker Connector, 1/4-Inch X 1/4-Inch Compression.
This item will fit the standard ice maker valves on back of refrigerator and the wall water source outlet.
Pick up our TTFLEX Brand ice maker hose and compare them to any other off the shelf refrigerator hoses. You will feel the high quality materials and workmanship.
Preventative maintenance is the competitive advantage. An ounce of prevention is worth more than a pound of cure. Don’t risk other low quality hoses leaking water and damaging your home and property.
Ice maker Hose Technical Detail:
One Piece (1 Pack) of 72 inch stainless steel braided hose
Certified AB-1953 NSF-61
UPC/CUPC approved
304 Stainless Steel Series
Best PVC inside
1/4″ Female Compression Thread x 1/4″ Female Compression Thread
72 inch length
800 PSI Burst Pressure
BRASS nuts, Brass inserts
North America Quality Insurance
TT FLEX Flexible Certified Appliance stainless steel braided ice maker hose Connector,1/4"comp1/4"comp,6FT
- 6′(72’’) LONG, one 1/4″ Compression Thread x 1/4″ Compression Thread Stainless Steel Braided Ice Maker Installation Kit.
- Easy to Install.Use to connect most refrigerator ice maker in-line filters.
- 800 PSI Burst Pressure. North America Quality Insurance.
- Manufacturing Ice Maker hose, Stainless Steel Braided Hose, Ice Maker supply hose.
- 304 Stainless Steel series. BRASS nuts, BRASS inserts, AB-1953, NSF-61 certification and UPC/CUPC approved.
Manufacturing Ice Maker Connector, 1/4-Inch X 1/4-Inch Compression.
This item will fit the standard ice maker valves on back of refrigerator and the wall water source outlet.
Pick up our TTFLEX Brand ice maker hose and compare them to any other off the shelf refrigerator hoses. You will feel the high quality materials and workmanship.
Preventative maintenance is the competitive advantage. An ounce of prevention is worth more than a pound of cure. Don’t risk other low quality hoses leaking water and damaging your home and property.
Ice maker Hose Technical Detail:
One Piece (1 Pack) of 72 inch stainless steel braided hose
Certified AB-1953 NSF-61
UPC/CUPC approved
304 Stainless Steel Series
Best PVC inside
1/4″ Female Compression Thread x 1/4″ Female Compression Thread
72 inch length
800 PSI Burst Pressure
BRASS nuts, Brass inserts
North America Quality Insurance
FlexCraft 26610-NL, Ice Maker Supply Line, Connects Ice Maker to Water Supply, Ice Maker Hose With 1/4 in Fittings On Both Ends, Braided Stainless Steel 10 Ft
- BURST PROOF: Flexcraft ice maker connector is made of super-high tensile strength braided stainless steel protects PVC inner tube, ensuring maximum pressure and performance.
- SPECIFICATIONS: 10 ft long with 1/4 in. x 1/4 in diameter, 125 PSI, Working Temperature 40 F-140 F
- UNIVERSAL FIT: pipe has 1/4 Brass chrome fitting on both ends and is compatible with most ice makers
- EASY INSTALLATION: prevents kinking or crimping for easy isntallation
- CERTIFICATION: UPC certified, Lead Free
This is an Everflow Supplies lead free flexible ice maker supply line, made of stainless steel braided tube. In particular, it has a length of 120 inch and it has two 1/4 inch compression fittings on both ends. Furthermore, upc, nsf and csa approved the part for meeting the lead free nsf 61-g standards.
Similar items with 4 stars and above
SharkBite 1/2-Inch Tee, 1/2 Inch, Push-to-Connect, PEX, Copper, CPVC
- INSTALLS IN SECONDS: 1/2-inch tee pipe connector requires no soldering, crimping, or glue–just push to create a watertight seal
- VERSATILE: Fits PEX, copper, CPVC, HDPE, PE-RT, and CTS pipe and connects them in any combination
- COMPATABILITY: Same as part numbers U362LFZ and U362LF
- QUALITY: SharkBite quality and performance is field-proven with more than 550 million connections
- SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times
Product Description
Easily connect pipe in seconds with the SharkBite Push-To-Connect 1/2-Inch Tee. This plumbing fitting joins copper, PEX, CPVC, HDPE, or PE-RT pipe in any combination. With no soldering, clamps, or glue required, connections are as simple as inserting a pipe into the fitting deep enough to be sealed by the specially-designed O-ring. Once inserted, the fitting’s stainless steel teeth bite down and grip the pipe. Disassembly is just as easy with the simple SharkBite disconnect tool. The SharkBite Tee is designed for potable water and radiant heating applications (including underground or behind-the-wall applications) with no access panels required.
SharkBite products work with your existing plumbing, are easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. SharkBite fittings are lead-free and meet all requirements for plumbing in California and Vermont. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
SharkBite is a provider of plumbing and water control systems for domestic, commercial, and industrial applications. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves, and PEX pipe, making it the only total plumbing solution from meter to fixture.
From the Manufacturer
SharkBite is the push-fit connection system that’s really taking hold. It’s the easiest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite, and get a grip on your next plumbing project. These fittings are lead free and meet all requirements for plumbing in California and Vermont.
ATP IMBIBE NSF 61 Polyethylene Plastic Tubing, Blue, 11/64" ID x 1/4" OD, 100 feet Length
Eastman 48392 Flexible Stainless Steel Braided Ice Maker Connector with Brass Nuts, 1/4-Inch Comp X 1/4-Inch Comp, 25-Feet
- LENGTH: The line length of this ice maker connector is 25-feet
- CONNECTION: This connector has 1/4-inch Comp x 1/4-inch Comp connection
- MATERIAL: This ice maker connector hose is made of high-impact braided 304 stainless steel exterior with a PVC core, nylon reinforcement and a clear vinyl outer shell which provides strength
- DURABLE: The sturdy stainless steel supply line makes it durable preventing kinking and has nickel-plated brass nuts which ensure tight fitting
- EASY INSTALLATION: This flexible supply line is very easy to install
Product Description
The Eastman 48392 Ice Maker Connector has a 1/4-inch comp x 1/4-inch comp connection and is 25-feet long. It is an ideal ice maker connector for use, featuring a grade 304 stainless steel braided exterior, plc. core, multi-filament braided nylon reinforcement, and a clear vinyl outer shell. For secure fitting, it comes with nickel-plated brass nuts.
Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. This flexible supply line resists corrosion and enables easy installation.
MAINTAINANCE: For use with water in accessible locations only.
• Shut off the water before installing.
• Inspect product before installing. Do not use if damaged in any way.
• Metal nuts – HAND-TIGHTEN, plus ¼ turn with a wrench.
• Do not over tighten.
• Do not use thread lubricants, tape, or putty.
• Do not expose to corrosive materials.
• Over tightening, using lubricants or exposure to corrosive materials can damage nut, connector, valves, or appliance and cause failure, leaking, or flood and property damage.
• This part must be inspected after installation and every six months thereafter. Replace if damaged, leaking or corroded.
• DO NOT reuse
• CAUTION: Improper installation can cause leaks with water damage.
From the Manufacturer
Eastman’s 25′ Stainless Steel Icemaker Hose is the standard in icemaker supply lines. Its quality is determined by what you can’t see. The supply line features a pvc core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping. This flexible supply line resists corrosion and is easy to install.
Fluidmaster 12IM72 Ice Maker Connector, Braided Stainless Steel – 1/4 Compression Thread x 1/4 Compression Thread, 6 Ft. (72-Inch) Length
- 72” in length
- ¼ COMP x ¼ COMP Female Compression Thread Connection
- Lead Free
- Easy Install
- Braided stainless steel construction won’t kink or crease
- Heavy-duty nickel-plated brass hex nuts are easy to grip and provide durability
- Replaces old copper or vinyl connectors
- Meets all code requirements
Product Description
This Fluidmaster Braided Stainless Steel 6-Foot (72 in) Length Ice Maker Supply Line connects your Icemaker to the wall water supply. Fluidmaster Icemaker water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts. A proven supply line that won’t crease or tangle even in the tightest of corners. Durability and ease-of-use were at the forefront of this design, with the nickel plated brass hex nuts for easy to grip tightening. A 1/4-Inch female compression thread by 1/4-Inch female compression thread connector with an efficient flow rate. Code approved with a 5 year warranty.
From the Manufacturer
Fluidmaster is the #1 toilet repair brand in the world. Fluidmaster parts are found in more toilets than all other brands. The customer’s first choice and preferred supplier of toilet tank trim since 1957. Fluidmaster’s complete line of toilet repair parts includes; fill valves, flush valves, flappers, tank levers, dual flush valves, bowl wax, toilet repair kits, seals, connectors and more. With manufacturing facilities across the world, Fluidmaster reaches over 90 countries worldwide with unparalleled quality.
FirstBuild OPLSDTNK01 Opal Side Tank
- Opal Side Tank connects to Opal on either side with powerful magnets built into its base. The design perfectly complements Opal for a design you?ll be proud to feature on your countertop
- By providing about a gallon more water to your Opal Side Tank lets Opal produce about 3 more bins of ice before having to refill
- Opal Side Tank lets Opal produce about 3x more ice before having to refill?giving you more of the good ice
FS-TFC Ice Maker Water Line Kit and Refrigerator Water Line Fridge Water Line Kit for Reverse Osmosis Systems & Water Filters, 25ft 1/4" Tubing with 1/4" Push-In and Compression Fittings
- 【Easy installation】Push-in quick connect fittings offer easy DIY installation with no tools required
- 【Compatibility】Works with most reverse osmosis and water filter systems using 1/4 inch standard tubing
- 【Effectiveness】Enjoy clear & delicious pure ice cubes and RO water at your fridge dispenser
- 【Multi-purpose】Provides water to refrigerators,Reverse Osmosis (RO) filter system,ice makers, water coolers and dispensers, humidifiers and more
- 【Pakage includes】Kit includes 25 feet 1/4″ tubing, a 1/4″ x 1/4″ x 1/4″ “T” valve, an inline 1/4″ x 1/4″ shut off valve, a compression fitting set.
Why choose the ice maker kit?1. This high-quality icemaker kit will provide you with clear and sparkling ice cubes and drinking water at your refrigerator by routing purified water from your existing reverse osmosis system. 2. The tested design allows users to connect and disconnect quick and easy without the need of any other tools. Applications include multiple potable liquids such as reverse osmosis drinking water, beverage dispensing, coffee machines, RV and Marine, misting systems, ice makers and many more. 3. If you have a reverse osmosis system and a refrigerator with an ice maker and/or water dispenser, this kit is perfect for you. A reverse osmosis filtration system hands down out performs a single inline carbon filter found in most popular refrigerators. So it’s smart to connect RO with your refrigerator’s water line. Parts List: -1/4 inch water tubing (25 ft. ) -a 1/4″ x 1/4″ x 1/4″ “T” valve -an inline 1/4″ x 1/4″ shut off valve -a compression fitting -a independent inline 1/4″ x 1/4″ valve 100% quality assurance. If you have any problems, please contact us, we’ll reply to you in 24 hours.
Kelaro 10 Foot Stainless Steel Washing Machine Hoses (2 Pack) Burst Proof, Lead Free
- 10′ LONG, PAIR of Stainless Steel Washing Machine Hoses
- FITS ALL WASHERS – Flexible Universal Washer Hose easily Connects to normal household Water Supply Lines in the Laundry room. Perfect for Homeowner or Contractor Installation.
- BURST PROOF Washer Hose Design and 5 YEAR WARRANTY
- WIDE OPENING ALLOWS WASHERS TO FILL 50% FASTER than other leading brands on Amazon- Spend less time waiting for Laundry
- LEAD FREE AB 1953, Grade 304 Stainless Steel, PVC Core. BRASS nuts, ferrules and nipples for superior Corrosion Resistance. UPC Certified
This premium set of Stainless Steel Washing Machine Hoses are designed to handle the stresses of the laundry room – extreme hot and cold temperatures, countless hours of use in cramped spaces and the agitation and friction from a running washing machine.
10 Feet of supply hose means you can move the washer around for retrieving lost clothes or normal maintenance – without having to disconnect the washing machine inlet hose every time.
Pick up our Kelaro Brand washing machine connectors and compare them to any other off the shelf washer hoses. You will feel the high quality materials and workmanship. The weight alone shows these are heavy duty.
Don’t risk inferior rubber or other low quality hoses leaking water and damaging your home and property.
Laundry Hose Technical Details:
2 Pack (1 Pair) of 10 foot Washer fill hoses
Certified AB 1953 LEAD FREE
UPC/cUPC Certified
Grade 304 Stainless Steel
PVC Core
3/4-in FGH x 3/4-in Female Garden Hose connections
120-in hose length
1,500 PSI burst strength
Nickel plated
BRASS nuts, ferrules and nipples
Working temperature 15° F – 158° F
Garden hose washers included and required for installation
For residential use only
5 Year Warranty
You may may also know this product as: washer hose, laundry hose, washer fill hose, washing machine fill hose, stainless steel hose, washing machine supply hose, stainless steel washer hose, Washing machine hookup, hose for washing machine stainless steel washing machine hoses, Washing machine connector, washing machine hose connector, washer hose hookup
Conclusion
By our suggestions above, we hope that you can found burst proof ice maker hose for you.Please don’t forget to share your experience by comment in this post. Thank you!
