owneaster 
Nowadays, there are so many products of cabinet cooling trigger in the market and you are wondering to choose a best one. You have searched for cabinet cooling trigger in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings cabinet cooling trigger which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Cabinet Air Control 12-Volt Trigger-Controlled Multi-Speed AV Cooling Fans, for Home Theater Cabinets
- This cooling system is designed to be mounted in your stereo or home theater equipment cabinet. It will quietly exhaust the hot air outside, or pull cooling air into the cabinet, or both — you choose how it is set up. It has two fan units, each with 2 high-quality, low-noise 80mm fans mounted together (4 fans total).
- The system includes a 12 volt trigger control module, which turns the fan on and off, under the control of your component’s 12v trigger socket. The 12v module controls the power from the multi-voltage transformer (included with the cooling system), which runs the fan at any one of 5 speeds. Please consult your component’s manual for details about how its 12v trigger operates.
- The fan units are connected by a 2-way power distribution cable, which allows you to separate the fans by up to 7 feet apart.
- The 80mm dual-fan cabinet cooling units measure approximately 4-5/8″ high x 8″ wide, which includes the mounting plate. The required hole is approximately 3-1/4″ high x 6-5/8″ wide. The unit is 1-1/4″ thick behind the mounting plate, and only requires about 1/3″ additional space behind the back of the fan to allow for airflow.
- Recommend fan speeds for this system: The two 80mm fan units (running together) are rated at 22db, while moving 112 cubic feet of air per minute (at 3/4 speed). They have approximately these specs at different speeds: 1/2 speed = 74CFM at 16db, 2/3 speed = 98CFM at 19db , and full speed = 148CFM at 25db (approximate). With component cooling, slow (and quiet) are the way to go!
OVERVIEW: This cooling system will add serious cooling to your AV or home theater cabinet. It has 4 high-quality, low-noise 80mm fans, with long-lasting and quiet fluid dynamic bearings. The fans are built into 2 separate dual-fan housings.
The system includes a 12 volt trigger control module, which turns the fans on and off, under the control of your receiver’s 12v trigger socket. The module detects the 12v signal, then sends the power from the cooling system’s power supply to the fans.
The 5 speed power transformer plugs into any AC outlet.
The standard system comes set up so that hot air enters the front of one fan unit (intake), and exits out the back of the other fan unit (exhaust). If you need to have another setup, just let me know. You can also easily change the fan orientation later, if necessary.
THE COOLING SYSTEM INCLUDES: 2 x dual-80mm fan units, 1 x 12 volt trigger module, 1 x 2-way power distribution cable, 1 x multi-speed power transformer and mounting hardware. All cooling system parts connect together using special heavy-duty Molex quick-connect plugs, allowing easy wire-routing.
SETUP: The system comes completely assembled, with all components installed, wired and ready to go! Installation is easy, using the supplied instructions and mounting template.
GUARANTEE: Your satisfaction is guaranteed. You can return the system for any reason within 30 days — just contact me (through Amazon) and I will send you a prepaid shipping label. Since starting in 2005, AV Cabinet Cooling has sold over 10,000 cooling systems, and we are dedicated to great customer service.
WARRANTY: Your purchase is also covered by a 12 month parts & labor warranty.
Receiver or Amplifier Megabase 12 Volt Trigger-Controlled Cooling Fans (12v), with multispeed Control, for Home Theater
- This super low-noise dual-120mm fan unit is designed to sit on your receiver’s top air vents. It has a special raised air-chamber base, which covers 145 square inches, and air is drawn out over the entire area of this raised base.
- The system includes a 12 volt trigger control module, which turns the fan on and off, under the control of your component’s 12v trigger socket. The 12v module controls the power from the cooling system’s multi-speed transformer, directing it to the fans when it detects a 12v signal. In addition, you control the speed of the fans, with the multi-speed power controller.
- IMPORTANT: Some receivers have a non-standard setup, where the receiver doesn’t directly control the trigger (for example, the trigger might be under the control of Zones 2 or 3, etc.). Please consult your receiver’s manual for details about how its 12v trigger operates, or contact me if you have questions.
- Recommended fan speeds for this system: The fans (running together) are rated at 13db while moving 50 cubic feet of air per minute at 1/3 speed, or 16db & 72CFM at 1/2 speed. With component cooling, slow (and quiet) are the way to go! Other available speeds: 2/3 speed = 19db/98CFM, 3/4 speed = 22db/110CFM, full speed = 25db/148CFM.
- The Megabase cooling unit measures 14.5″ wide, and 10″ deep. It is 1-1/2″ tall, and only requires about 1/4 inch of additional space above for airflow.
OVERVIEW: This cooling system has two high-quality, low-noise 120mm fans, with long-lasting and quiet fluid dynamic bearings.
It includes a 12 volt trigger control module, which turns the fan on and off, under the control of your receiver’s 12v trigger socket. The module detects the 12v signal, then sends the power from the cooling sysem’s transformer to the fans.
The fan unit has a specially-constructed raised air-chamber base that enlarges the area of airflow, while also sealing air and preventing vibrations. This base covers over 145 square inches. Please make sure that the top of your component has a flat area on top that is at least 14.5″ x 10″. Don’t worry if your air vents are smaller (or larger) than the air-chamber base — it will work with any size vents.
THE COOLING SYSTEM INCLUDES: 1 x dual-120mm (2 fans) Megabase fan unit, 1 x 12v trigger control module, 1 x 5 speed power transformer, and printed installation instructions. All cooling system parts connect together using special heavy-duty Molex quick-connect plugs, which allows the parts to be separated for easy wire-routing.
SETUP: The system comes completely assembled, with all components installed, wired and ready to go! Just plug the power transformer into an AC outlet, and drop the fan unit on top of your receiver’s top air vents.
GUARANTEE: Your satisfaction is guaranteed. You can return the system for any reason within 30 days — just contact me (through Amazon) and I will send you a prepaid return shipping label. Since starting in 2005, AV Cabinet Cooling has sold over 10,000 cooling systems, and we are dedicated to great customer service.
WARRANTY: Your purchase is also covered by a 12 month parts & labor warranty.
AC Infinity AIRPLATE S2, Quiet Cooling Blower Fan System 6" with Speed Control, for Home Theater AV Cabinets
- An ultra-quiet blower system designed for cooling cabinets that requires minimal noise.
- Low-profile aluminium frame is ideal where mounting space is limited or a smaller footprint is desired.
- Features a multi-speed controller to set the fan’s speed to optimal noise and airflow levels.
- Powered by wall outlet or USB port, included Turbo Adapter increases performance by 25%.
- Dimensions: 5.8 x 2.0 x 4.7 in | Airflow: 35 CFM | Noise: 17 dBA | Bearings: Dual Ball
AC Infinity AIRCOM S9, Quiet Cooling Fan System 17" Top-Exhaust for Receivers, Amps, DVR, AV Cabinet Components
- A quiet fan system designed for cooling receivers, game consoles, and other AV components.
- Protects components from overheating, performance issues, and shortened lifespans.
- Programming features two thermal trigger modes and four speed control options.
- Contains three dual-ball bearing fans with PWM-controlled motors to minimize noise.
- Dimensions: 17 x 13.5 x 1.5 in. | Exhaust: Top | Airflow: 210 CFM | Noise: 21 dBA
Overview
A quiet cooling fan system designed to be placed on top of AV components such as receivers, amplifiers, and DVRs. Maintaining an optimal temperature for components prevents overheating, ensures constant performance, and extends their lifespan. The controller on the front of the cooling system features a smart thermostat trigger and fan speed control. The steel enclosure houses three dual-ball bearing fans that pulls heat out of the component and exhausts upwards. Its low-profile design enables the unit to fit in tight spaces. Includes corded power adapter to plug the fan system through an outlet.
Intelligent Programming
There are three programming settings available which includes two temperature trigger modes. The fans can also be set to run continuously or be turned off. Four fan speeds are available for each active mode and will determine the speed at which the fans run when they are triggered. This ensures optimal airflow and noise levels for your application.
Design and Construction
Each system features dual-ball bearing fans rated at 67,000 hours and are certified by CE and RoHS. Fans contain a PWM-controlled motor used to minimize noise during speed variations and are suspended in mid-air with silicone mounts to absorb vibrations. A low-profile design allows the unit to fit in applications with a limited height clearance. Aluminum and steel construction enables additional components up to 30 pounds to be stacked on top.
AC Infinity AIRCOM S7, Quiet Cooling Fan System 12" Top-Exhaust for Receivers, Amps, DVR, AV Cabinet Components
- A quiet fan system designed for cooling routers, modems, game consoles, and other AV components.
- Protects components from overheating, performance issues, and shortened lifespans.
- Programming features two thermal trigger modes and four speed control options.
- Contains two dual-ball bearing fans with PWM-controlled motors to minimize noise.
- Dimensions: 11.6 x 6.3 x 1.5 in. | Exhaust: Top | Airflow: 140 CFM | Noise: 19 dBA
AC Infinity AIRCOM S6, Quiet Cooling Blower Fan System 12" Rear-Exhaust for Receivers, Amps, DVR, AV Cabinet Components
- A quiet fan system designed for cooling routers, modems, game consoles, and other AV components.
- Protects components from overheating, performance issues, and shortened lifespans.
- Programming features two thermal trigger modes and four speed control options.
- Contains two dual-ball bearing blowers with PWM-controlled motors to minimize noise.
- Dimensions: 11.6 x 6.3 x 1.5 in. | Exhaust: Rear | Airflow: 100 CFM | Noise: 20 dBA
AC Infinity AIRCOM T9, Quiet Cooling Fan System 17" Top-Exhaust for Receivers, Amps, DVR, AV Cabinet Components
- A quiet fan system designed for cooling receivers, amplifiers, DVRs, and other AV components.
- Protects components from overheating, performance issues, and shortened lifespans.
- LCD thermostat programming with six speed controls, alarm alerts, failure triggers, and memory.
- Contains three dual-ball bearing fans with PWM-controlled motors to minimize noise.
- Dimensions: 17 x 13.5 x 1.5 in. | Exhaust: Top | Airflow: 210 CFM | Noise: 21 dBA
Overview
A quiet cooling fan system designed to be placed on top of AV components such as receivers, amplifiers, and DVRs. Maintaining an optimal temperature for components prevents overheating, ensures constant performance, and extends their lifespan. The LCD digital controller on the front of the system features a smart thermostat with speed control and status alerts. The steel enclosure houses three dual-ball bearing fans that pulls heat out of the component and exhausts upwards. Its slim low-profile design enables the unit to fit in tight spaces. On the backside are ports to connect and control additional fans. Includes corded power adapter to plug the fan system through an outlet.
Intelligent Programming
Programming includes an easy-to-use thermostat and a SMART mode that automatically adjusts the fan’s speed to react to varying temperatures. Additional features include alarm alerts, fan failure triggers, power savings setting, display lock, and backup memory. Six fan speeds are available with three screen brightness settings. Behind the unit are ports that can control up to six individual AC Infinity AIRPLATE Cabinet fans and MULTIFAN Component fans.
Design and Construction
Each system features dual-ball bearing fans rated at 67,000 hours and are certified by CE and RoHS. Fans contain a PWM-controlled motor used to minimize noise during speed variations and are suspended in mid-air with silicone mounts to absorb vibrations. A low-profile design allows the unit to fit in applications with a limited height clearance. Aluminum and steel construction enables additional components up to 30 pounds to be stacked on top.
AC Infinity AIRPLATE T8 PRO, Quiet Cooling Dual-Fan System 6" with Thermostat Control, for Home Theater AV Cabinets
- An ultra-quiet dual-fan system designed for cooling cabinets that requires minimal noise.
- Features an on-board processor that provides a digital read-out of the cabinet’s temperatures.
- Programming includes thermostat control, fan speed control, and SMART energy saving mode.
- Two fan units with controller, containing CNC machined aluminum frames with a modern brushed black finish.
- Each Unit’s Dimensions: 6.3 x 6.3 x 1.3 in | Total Airflow: 104 CFM | Total Noise: 19 dBA | Bearings: Dual Ball
Overview
The ultra-quiet fan system is designed to cool home theaters, entertainment centers, and audio video cabinets. This kit includes two single fan units, one exhaust and one intake. plus a thermal controller. Each fan uses a custom motor engineered to minimize noise during speed variations and are certified by CE and RoHS. Containing dual ball bearings rated at 67,000 hours, the unit can be mounted in any direction. Features a CNC machined aluminum frame with a modern brushed black finish. Fans are set to exhaust air out the frame but this can be reversed to intake air using a screw driver. Includes all necessary hardware to easily mount the unit onto a cabinet and power it through a standard wall outlet.
Thermal Controller
The thermal controller features an on-board processor that provides a digital read-out of the cabinet’s temperatures. Programming includes an easy-to-use thermostat mode, fan speed control, and a SMART mode that automatically adjusts the fan’s speed to react to surrounding temperatures. Includes a back-lit LCD display with back up memory to recover your settings during power failures.
Connecting Additional Units
For cabinets that requires more airflow, additional AIRPLATE S series cabinet fans can be connected to the included thermal controller. Up to six fans can share the same thermal controller or wall outlet power source. AIRPLATE S3/T3 contains one fan, AIRPLATE S7/T7 contains two fans, and AIRPLATE S9/T9 contains three fans.
Applications
This ultra-quiet cooling system is popular in a variety of applications including home theaters, entertainment centers, and audio video cabinets; and smaller enclosures and racks holding computers, receivers, amplifiers, and other AV equipment.
AC Infinity Controller 2, Fan Thermostat and Speed Controller, Controls AIRPLATE, MULTIFAN, USB Fans and Devices, for AV Cabinet Cooling
- Intelligent thermal fan controller with on-board processor and digital LCD display.
- Controls up to six AC Infinity Cabinet and USB Fans, see below for compatibility.
- Automated programming that self-adjusts cooling power in response to changing temperatures.
- Features an alarm system, display lock, six fan speeds, two buffer options, and power failure memory.
- Complete kit includes precision thermal probe, mounting screws, and power wall adapter
Wilton Excelle Elite 3-Tier Cooling Rack for Cookies, Cakes and More
- Stacked cooling racks let you cool dozens of cookies or 3 cakes all at once without taking up a lot of space
- Reinforced non-stick coating for easy release and quick cleanup
- Each rack measures 15.9 x 9.9 in. (40.4 x 25.1 cm)
- Limited 10-year warranty
- Before first and after each use, wash in warm, soapy water for best results
Love to bake but have limited space? This three-tiered cooling rack just solved that problem. It expands to 3 racks that stack on top of each other so you can cool batches of cookies, cake layers or countless finger foods all at once without sacrificing counter space. Once done, it collapses right back down for easy storage.
Conclusion
By our suggestions above, we hope that you can found cabinet cooling trigger for you.Please don’t forget to share your experience by comment in this post. Thank you!
