Product description:

CT sounds brings to you with another impressive monoblock amplifier called as the T-1500.1D amplifier. This amplifier’s steel fin-typed body helps to reduce the internally generated heat and works as a natural heat sink for the whole amplifier system. You can place the amplifier at any inner convenient place in your vehicle but keep the amplifying knob in the front for easy controlling. Thus you can have the perfect gain access to whole the system.

 The internal circuitry of this product is truly beautiful. This incontestably is a versatile device with greater reliability and surely is of much value.

 Features:

1.       Class D Amplifier Technology

2.       The T-1500.1D car amplifier ratings-

a.       1 ohm @ 14.4v, 1500W (rms), 3000W (max)

b.      2 ohm @ 14.4v, 900W (rms), 1800W (max)

c.       4 ohm @ 14.4v, 450W (rms), 900W (max)

Technical specifications:

1.    1.   No of channel:                                              1

2.    2.   Frequency response (-3dB):                      10Hz – 250Hz

3.    3.   Gain adjustment:                                          0.2v – 5v

4.    4.   Subsonic adjustment (variable):                15Hz – 50Hz

5.    5.   Bass boost (variable):                                  0dB – 12dB

6.     6.  Signal to noise ratio:                                       100dB

7.    7.   Damping factor:                                                180

8.     8.  Minimum speaker impedance:                     1 ohm

9.     9.  Low pass filter (variable):                             50Hz – 250Hz

10 10.  No of fuses:                                                       N/A

1     11. Bass level remote control (16.4ft):           Yes

12 12. Operating voltage (-ve ground):                DC 12v

1    13. Bass knob:                                                           Remote gain control

Polk Audio PA D1000.1 Class D MOSFET Monoblock Mobile Audio Amplifier; 500 Watts RMS @ 4 ohms, 800 Watts RMS @ 2 ohms and 1200 Watts RMS @ 1 ohm; Remote Subwoofer Level Control

The PA D1000.1 offers an ultra-compact, minimalist design. A toroidal transformer helps keep the amplifier’s sleek aluminum extruded design under 2″ tall while ensuring plenty of clean, efficient power. A low THD, a high signal-to-noise ratio, plus wide bandwidth frequencies, make the new PA D1000.1 a high performance monoblock for high performance bass.

Key Features

• Super-efficient class D design—runs much cooler than conventional amps
• High-speed MOSFET switching—Power supply with outputs stable into 1 ohm loads
• Protection—Thermal, DC offset, reverse polarity and short circuit protection
• Variable low-pass filter 40 Hz-220 Hz
• Variable subsonic filter 20 Hz-38 Hz
• Bass boost at 0 dB-12 dB
• Bass boost at 44 Hz
• Remote subwoofer level control
• Nickel-plated wire terminals & RCA connectors
• Level control—adjusts the gain of the channel to match the output voltage from your head unit
• Line level outputs—provides a full range signal for easy connection to additional amplifiers
• Stainless steel hardware

Specifications

• RMS Continuous Power @ 4 Ohms: 500W
• RMS Continuous Power @ 2 Ohms: 800W
• RMS Continuous Power @ 1 Ohm: 1200W
• Distortion at Rated Power: <>
• Signal-to-noise Ratio: 105 dB
• Frequency Response: 20Hz – 200Hz
• Damping Factor: >150
• Crossover Filter Slope: 12dB/octave
• Input Sensitivity: 200mV – 6V
• Supply Voltage: 10V – 16V
• Power Connections: 4 AWG
• Ground Connections: 4 AWG
• Speaker Connections: 12 AWG
• Dimensions: 1 13/16″ x 6 3/4″ x 12 15/16″
• Weight: 6.5 lbs

2000W Peak (1944W RMS) APMI Series Class-D Monoblock 1-Ohm Stable Mosfet Car Amplifier

Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.

The RXA-T1 is a 2 channel high power amplifier with 1,500 Watts peak output, 750 Watts RMS output (2 x 375 @ 2 Ohms) and 500 Watts RMS (2 x 250 @ 4 Ohms). You can also bridge the amplifier and get 1 x 750 Watts RMS @ 4 Ohms. The CEA-2006 compliant rating is 125 x 2 @ 4 Ohms and 185 x 2 @ 2 ohms <1% thd.="" most="" brands="" do="" not="" use="" cea="" compliant="" ratings="" because="" quite="" simply="" they="" do="" not="" want="" you="" to="" be="" able="" to="" compare="" their="" amps="" to="" others="" on="" the="" market.="" over="" here="" at="" rockville,="" we="" want="" you="" to="" be="" able="" to="" compare="" our="" amps="" to="" any="" brand="" on="" the="" market.="" for="" this="" reason="" we="" are="" supplying="" you="" with="" multiple="" ratings.="" the="" cea="" compliant="" rating="" should="" be="" used="" when="" matching="" up="" or="" comparing="" this="" amplifier="" to="" other="" cea="" compliant="" brands="" such="" as="" kicker,="" rockford="" fosgate,="" alpine,="" etc.="" we="" also="" supply="" an="" rms="" rating="" which="" should="" be="" used="" when="" comparing="" with="" great="" brands="" that="" are="" not="" cea="" compliant="" such="" as="" hifonics,="" earthquake,="" powerbass,="" etc.="" the="" peak="" rating="" is="" simply="" what="" the="" amplifier="" can="" hit="" for="" a="" split="" second="" at="" the="" highest="" point="" of="" a="" song.="" this="" rating="" from="" any="" brand="" is="" not="" really="" important.="" rms="" and="" cea="" ratings="" truly="" are="" the="" most="">

This unit also features a high speed MOSFET power supply, studio-grade bipolar output stage transistors and ELNA brand audiophile capacitors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. High Level inputs, also referred to as Speaker Level inputs, allow you to install the amplifier into your vehicle even if you do not have any preamp outputs available.

Get clean quality sound with the Boss Audio Armor AR1600.2 Class A/B 2-Channel Full Range Amplifier. This powerful 2-Ohm stable amplifier features 1600 Watts Max Power with a MOSFET power supply to boost your listening pleasure. Customize the sound with Fixed High Pass Crossover, Variable Low Pass Crossover and Bass Boost. Power up your music with the Remote Subwoofer Control. Bridge channels for more power and flexibility. The Armor Series of amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience. Drive your tunes with the Boss Audio AR1600.2. For further product details, please scroll down. Troubleshoot-if amplifier gets very hot, check the minimum speaker impedance for the amplifier is correct or check that there is good air circulation around, in some applications it may be necessary to add external cooling fans. If amplifier does not power up, check to make sure it has good ground connection or check that remote input has atleast 9 vdc or check that there is battery power on the plus terminal or check that there is at 12 volt or make sure the protection led is not illuminated, if it is lit shut off the amplifier briefly and then re-power it

1200W APMI Series 4-Channel Class AB Car Amplifier

The MA Audio HK2000D 1,800 watt Mono-Block Class “D” car amplifier with a powerful, yet quiet built-in cooling fan is more efficient and powerful than any amp in this price range. The hot new look of this amp is incredible, and will make the finish your install look more attractive.

This is a high-end amp with 1,800 watts of real efficient pure bass power. This amp has built-in advanced low pass crossovers and is designed to give you the ultimate deep bass sound quality, you can only get out of a mono amp. You can adjust the frequency of the bass until you fine-tune the amp to sound exactly how you like it!

MA Audio is one of the best car audio brands around today. We carry a huge selection of the newest and best models, below wholesale prices!

RMS Power @ 14.4V: 750W x 1 @ 4 Ohm, 1000W x 1 @ 2 Ohm, 1500W x 1 @ 1 Ohm

RMS Power @ 17V: 1000W x 1 @ 4 Ohm, 1500W x 1 @ 2 Ohm, 1800W x 1 @ 1 Ohm

The Model 200 is an ultra-small power audio mini amplifier. Despite delivering 150 Watts of power, the Model 200 is no larger than a deck of cards. It can be hidden or placed for everyone to see virtually anywhere without taking up the space of traditional amplifiers. Despite it’s small size, the Model 200 offers astounding audio performance at 115 dB dynamic range and is suited even for the most demanding application.

This state-of-the-art mini amplifier delivers the energy efficiency of today’s best digital class-D audio amplifiers while at the same time offering far lower audio distortion at only 0.04 %. The Model 200 offers the flexibility of operating either as a stereo amplifier or alternatively as a monoblock and thus can easily adapt to almost any scenario.

It’s aluminium chassis itself provides enough cooling. No built-in fans or additional cooling are necessary. All you will hear is the music.

Technical Specifications:

Output power:

Mono: 1 x 150 W (peak), 1 x 80 W (rms)
Stereo: 2 x 40 W (rms)
Dynamic range / signal-to-noise ratio:

Mono: 115 dBA
Stereo: 112 dBA

Frequency response: 1 Hz – 70 kHz @ 8 Ohms

Total harmonic distortion (THD+N):

Mono: 0.04 % @ 50 W, 1 kHz
Stereo: 0.04 % @ 20 W, 1 kHz

Power efficiency: 93 %

Channel separation: 77 dB

Idle power consumption: < 3="">

Dimensions: 3-9/16 ” (W) x 3-7/16 ” (D) x 3/4 ” (H)
91 mm (W) x 86 mm (D) x 19 mm (H)

【 Cheap price G8 2ch Bluetooth Audio Power Amplifier Fm Radio Player Support Sd Usb – Best Price G8 2ch Bluetooth Audio Power Amplifier Fm Radio Player Support Sd Usb – Best Service for G8 2ch Bluetooth Audio Power Amplifier Fm Radio Player Support Sd Usb】

Here is the spot for you to definitely buy in specials price and good value for price for G8 2ch Bluetooth Audio Power Amplifier Fm Radio Player Support Sd Usb:

• Great quality, Great price
• Modern design for G8 2ch Bluetooth Audio Power Amplifier Fm Radio Player Support Sd Usb
• Simple assembly, all pieces arrive to you
• Fast & Free Shipping on most items

❤❤❤SATISFACTION GUARANTEE:100% Satisfaction and Lifetime Replacement Warranty if your not completely happy or the G8 2ch Bluetooth Audio Power Amplifier Fm Radio Player Support Sd Usb ever breaks!

❤❤❤”YAY!” Order Now and Get free Shipping.

The Skar Audio SKv2-2500.1D is a competition grade monoblock class D subwoofer amplifier that was designed to deliver unequivocal performance and power output. As a part of the flagship SKv2 series of amplifiers from Skar Audio, this model utilizes only the highest quality internal components and features advanced engineering enhancements that allow it to outperform anything else on the market in its power class.

Whether you are competing in the SPL lanes, or looking for the absolute best amplifier to power your “daily driver” audio system, look no further – this is the amplifier for you. The SKv2-2500.1D is conservatively rated at 2,500 Watts RMS power, and at max power output can produce more than an astonishing 2,900 watts. In addition to its extreme performance capabilities, this amplifier features an advanced heatsink design that allows for maximum cooling, as well as 4-way protection circuitry, enabling the amplifier to operate efficiently at peak output levels for hours on end.

Furthermore, you’ll have full reign over your amplifier with the built-in user control panel, featuring variable adjustment tunings for gain level, subsonic filter, bass boost, low-pass filter, and phase control. Versatility is key, and so you have the ability with the SKv2-2500.1D to run them strapped if desired, which is unique to our SKv2 series of amplifiers. In addition to all the above features, it also has both RCA inputs and outputs so that you can easily daisy chain multiple amplifiers together, and utilizes massive 1/0-gauge power and ground input terminals which allow for maximum current flow and therefore higher power output.

This amplifier comes with a remote subwoofer level control (bass knob) allowing the user to have full control over their bass from the front of the vehicle.

Conclusion

By our suggestions above, we hope that you can found car amplifier monoblock with cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!

Kick your Bass into high gear with the Boss Audio Armor AR4000D Class D Monoblock Amplifier. This powerful 1-Ohm stable Amplifier features 4000 Watts Max Power with a MOSFET power supply to get your tunes rocking. Customize the sound with Variable Low Pass Crossover, Bass Boost and Subsonic Filter. Maximize the Bass with the Remote Subwoofer Control. For double the performance and power, strap on another AR4000D for a total power of 8,000 Watts @2-Ohms. The Armor Series of Amplifiers packs incredible power and performance into a feature-rich slim design for put-it-anywhere convenience. Give power to your playlists with the Boss Audio AR4000D. For further product details, please scroll down.

Power Ratings:

RMS Power Output:
Stereo 8 Ohm: 2 x 250W
Stereo 4 Ohm: 2 x 400W
Bridged 4 Ohm: 1 x 800W
Peak Power Output:
Stereo 8 Ohm: 2 x 1000W Max
Stereo 4 Ohm: 2 x 1500W Max
Bridged 4 Ohm: 1 x 3000W Max

Terminals:

Input Terminals:
Combo jack (XLR and ¼”) A & B inputs
RCA A & B Inputs
Output Terminals:
Banana binding post speaker output
Speakon output
XLR direct output

Features:

Rockville RPA9 3000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier
2U rack space
Bridged and Stereo output switch makes this perfect for (2) subwoofer, (2) speakers, or (4) speakers
Built in crossover switch allows make this perfect for speakers, monitors, or subwoofers
Channel A & B Clipping Led Indicators
Channel A & B Separate Level Controls
Power, signal, overload, clipping, and protection LED indicators on front of amp
Heavy duty rack mount ears with handles
Built-in dual high velocity quiet cooling fans
Maximum headroom for 4-ohm and 8-ohm Speakers
Level controls for precise setting and matching of sensitivity
Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load
User serviceable fuse (5A, 250V)
Frequency Response: 20Hz to 20KHz 102dB
Power Requirements: 120V / 50-60Hz
Weight: 17.19 lbs
Dimensions: 18.97 x 13.97 x 3.54 inch

Small Compact 4.75″ wide chassis. 2 ohm stable class d monoblocks. Mosfet pwm power supply. 50-250Hz variable 12Db LP Crossover. 10-50Hz variable 12Db subsonic Crossover.

4-Channel Bridgeable Amplifier with Bass Boost. New Pioneer amps brilliantly integrate high-power performance superior to that of previous models in space-efficient sizes for flexibility of installation in various car cabins.

Break out the Bass with the Planet Audio Anarchy AC2500.1M Monoblock Class A/B Amplifier. This powerful 2-Ohm stable Amplifier features 2500 Watts Max Power with a MOSFET power supply to drive your tunes to the limit. Customize the sound with Variable Low Pass Crossover and Bass Boost. Unleash the Bass with the Remote Subwoofer Control. The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud. Enjoy music on your terms with the Planet Audio AC2500.1M.

For more product details, please scroll down.

Product description:

CT sounds brings to you with another impressive monoblock amplifier called as the T-1500.1D amplifier. This amplifier’s steel fin-typed body helps to reduce the internally generated heat and works as a natural heat sink for the whole amplifier system. You can place the amplifier at any inner convenient place in your vehicle but keep the amplifying knob in the front for easy controlling. Thus you can have the perfect gain access to whole the system.

 The internal circuitry of this product is truly beautiful. This incontestably is a versatile device with greater reliability and surely is of much value.

 Features:

1.       Class D Amplifier Technology

2.       The T-1500.1D car amplifier ratings-

a.       1 ohm @ 14.4v, 1500W (rms), 3000W (max)

b.      2 ohm @ 14.4v, 900W (rms), 1800W (max)

c.       4 ohm @ 14.4v, 450W (rms), 900W (max)

Technical specifications:

1.    1.   No of channel:                                              1

2.    2.   Frequency response (-3dB):                      10Hz – 250Hz

3.    3.   Gain adjustment:                                          0.2v – 5v

4.    4.   Subsonic adjustment (variable):                15Hz – 50Hz

5.    5.   Bass boost (variable):                                  0dB – 12dB

6.     6.  Signal to noise ratio:                                       100dB

7.    7.   Damping factor:                                                180

8.     8.  Minimum speaker impedance:                     1 ohm

9.     9.  Low pass filter (variable):                             50Hz – 250Hz

10 10.  No of fuses:                                                       N/A

1     11. Bass level remote control (16.4ft):           Yes

12 12. Operating voltage (-ve ground):                DC 12v

1    13. Bass knob:                                                           Remote gain control

Product Description

The Pyle Academy Series Amps will provide your audio setup with sophisticated new sound and serious power. Add performance and quality enhancement to your music when you upgrade your audio system with these rugged and high-efficiency amps. Enjoy tomorrows advanced sound technology that outperforms all other amps in its class.

From the Manufacturer

Bridgeable Connection view larger

Academy Series Amplifiers view larger

System Application Diagram view larger

Smart Sound and Style

MOSFET Power Supply view larger

Power Connection Diagram view larger

Versatile Hybrid Amplifiers

The Pyle Academy Series Amplifiers will provide your audio setup with sophisticated new sound and serious power. Add performance and quality enhancement to your music when you upgrade your audio system with these rugged and high-efficiency amps. Enjoy tomorrow’s advanced sound technology that outperforms all other amps in its class.

This lineup of Pyle Academy amps will educate your audience with the knowledge of true sound quality. These amps will give you that sound you’ve been looking for with crisp music reproduction in the mobile environment.

Sound Specialization

These high-efficiency class-D amplifiers host an impressive power output and are where form and function meet. Configurable for Bridgeable and Tri-Way applications, built-in Variable Subwoofer Crossovers, MOSFET Pulse Width Modulated Power Supply, High Level Low Impedance MOLEX Input Connector, strong frequency response rates along with plenty of more features that make the Pyle Academy Series Amplifiers smarter than the competition.

Intelligent Design

Safety features include power and protection LED indicators; soft turn-on/off, thermal, overload and speaker-short protection. The built-in air-induction fan cooling system acts as another line of safety keeping you and your equipment safe. Status LED Diagnostic Condition indicators show when the amplifier is powered up normally and when your system is experiencing a protection fault.

Pump it Up

Take advantage of the Bass EQ Boost to add massive quality sound and performance. Make adjustments to the Bass EQ settings until you achieve that extra amount of kick you’ve been waiting for.

Intelligent Sound – Intelligent Style

The smooth-edged and rounded design leaves a blue-pearl gloss finish on the fortified aluminum heat-sink. The stream-lined and high-tech appearance will definitely add some attention to your audio.

Total Audio Control

Once you are connected, customize and adjust your listening experience to your liking with the amplifier’s control center. You can personalize and fine-tune settings like:

• High-Pass Filter – When Crossover Mode is in High-Pass Mode, this control limits the frequencies which will be distributed to the speakers Crossover Switch – Routes output of the Low Pass (LP), or the output of the High Pass (HP) filters, or ‘FULL’ to the internal power amplifier.
• Low-Pass Filter – When Crossover Mode Selector is in Low-Pass Mode, this control limits the frequencies which will be distributed to the speakers.
• Line Input – Accepts line level (RCA) inputs from 0.2 to 5-Volt.
• High-in – Accepts speaker level inputs from radios that do not line level (RCA) outputs.
• Bass EQ – Gives you manual control over Bass Boost decibel adjustments.

*Please refer to table below for amplifier specific information and adjustment options.

Input Connections

Turn the volume control on the amplifier to minimum initially. Once the initial power sequence has been performed, set the volume control to roughly 80% of full power. Play some audio and slowly turn up the amplifier volume control until you hear some distortion, and then back it off for the sharpest sound setting. This amplifier has RCA connections for Low Level inputs. Low Level signal is carried through RCA cables. It is preferred to use Low Level inputs to the amplifier if the headunit is equipped with matching outputs.

Speaker Output Connections

Connect right and left speaker wire to corresponding speaker output terminals of the terminals. Be sure to have the positive wire from the speaker to the positive speaker terminal of the amplifier and the negative wire from the speaker must connect with the speaker terminal of the amplifier. Reversing any of these connections will result in the speaker cones moving out of phase which causes bass cancellation.

Technical Specs

• Four Channel Bridgeable Amplification
• Tri-way Configuration: 4/3/2 Channels
• 4 X 400 Watts Total Output @ 4 Ohms
• 1600 Watts Total System Output @ 4 Ohms
• Variable Gain Control
• MOSFET Pulse Width Modulated Power Supply
• 2 Ohm Stereo Stable
• Built-In Variable Subwoofer Crossover
• High Level Low Impedance MOLEX Input Connector
• RCA Low Level Inputs
• Speaker Output Terminal Strip
• Signal/Noise Ratio 90dB
• THD Less Than 0.04%
• Frequency Response: 15Hz-30kHz
• Overload Protection
• Thermal Protection
• Short Circuit Protection
• Power On LED Indicator
• LED Diagnostic Condition Indicator
• Automotive Type Fuse Protection
• Dimensions: 11.02”L 9.76”W 2.26”H

More Amplifier Options from the Academy Series:

	PLAM1000	PLAM1200	PLAM2300	PLAM1600 Currently Viewing	PLAM3000	PLAM2001D	PLAM3601D
Amplifier Type	2-Channel	2-Channel	2-Channel	4-Channel	4-Channel	Monoblock	Monoblock
Total Watt Output	1,000	1,200	2,300	1,600	3,000	2,000	3,600
Peak Output Power @ 4 Ohms	500 x 2	600 x 2	1150 x 2	400 x 4	750 x 4	800 x 1	1500 x 1
Peak Output Power @ 2 Ohms	700 W x 2	800 x 2	1300 x 2	600 x 4	1000 x 4	1600 x 1	2400 x 1
Peak Output Power @ 1 Ohms	–	–	–	–	–	2000 x 1	3600 x 1
Input Sensitivity	0.1 ~ 1 V	0.1 ~ 1 V	0.1 ~ 1 V	0.2 ~ 5 V	0.2 ~ 5 V	0.2 ~ 6 V	0.2 ~ 6 V
S/N Ratio	>90 dB	>90 dB	>90 dB	>90 dB	>90 dB	>95 dB	>95 dB
High Pass Cross Frequency	120Hz ~ 3KHz	120Hz ~ 3KHz	120Hz ~ 3KHz	120Hz ~ 3KHz	120Hz ~ 3KHz	–	–
Low Pass Cross Frequency	50Hz ~ 250Hz	50Hz ~ 250Hz	50Hz ~ 250Hz	50Hz ~ 250Hz	50Hz ~ 250Hz	40Hz ~ 150Hz	40Hz ~ 150Hz
Subsonic Filter	–	–	–	–	–	15Hz ~ 55Hz	15Hz ~ 55Hz
Bass EQ	6dB / 12dB @ 45Hz	6dB / 12dB @ 45Hz	6dB / 12dB @ 45Hz	6dB / 12dB @ 45Hz	6dB / 12dB @ 45Hz	0-12dB @ 45Hz	0-12dB @ 45Hz
Speaker Impedance	2 ~ 16 Ω	2 ~ 16 Ω	2 ~ 16 Ω	2 ~ 16 Ω	2 ~ 16 Ω	1 ~ 8 Ω	1 ~ 8 Ω
Fuse Size	1 x 20A	1 x 30A	1 x 40A	2 x 15A	2 x 30A	2 x 35A	4 x 25A

The Power T500X1br is an ultra-compact, patented Boosted Rail 500 Watt mono amplifier. Features high-level auto turn-on, input/output clip detection, top mounted controls and dual fan forced induction cooling. Perfect for hybrid, electric, small cars, trucks, motorcycles, and side-by-side UTVs.

Polk Audio PA D1000.1 Class D MOSFET Monoblock Mobile Audio Amplifier; 500 Watts RMS @ 4 ohms, 800 Watts RMS @ 2 ohms and 1200 Watts RMS @ 1 ohm; Remote Subwoofer Level Control

The PA D1000.1 offers an ultra-compact, minimalist design. A toroidal transformer helps keep the amplifier’s sleek aluminum extruded design under 2″ tall while ensuring plenty of clean, efficient power. A low THD, a high signal-to-noise ratio, plus wide bandwidth frequencies, make the new PA D1000.1 a high performance monoblock for high performance bass.

Key Features

• Super-efficient class D design—runs much cooler than conventional amps
• High-speed MOSFET switching—Power supply with outputs stable into 1 ohm loads
• Protection—Thermal, DC offset, reverse polarity and short circuit protection
• Variable low-pass filter 40 Hz-220 Hz
• Variable subsonic filter 20 Hz-38 Hz
• Bass boost at 0 dB-12 dB
• Bass boost at 44 Hz
• Remote subwoofer level control
• Nickel-plated wire terminals & RCA connectors
• Level control—adjusts the gain of the channel to match the output voltage from your head unit
• Line level outputs—provides a full range signal for easy connection to additional amplifiers
• Stainless steel hardware

Specifications

• RMS Continuous Power @ 4 Ohms: 500W
• RMS Continuous Power @ 2 Ohms: 800W
• RMS Continuous Power @ 1 Ohm: 1200W
• Distortion at Rated Power: <>
• Signal-to-noise Ratio: 105 dB
• Frequency Response: 20Hz – 200Hz
• Damping Factor: >150
• Crossover Filter Slope: 12dB/octave
• Input Sensitivity: 200mV – 6V
• Supply Voltage: 10V – 16V
• Power Connections: 4 AWG
• Ground Connections: 4 AWG
• Speaker Connections: 12 AWG
• Dimensions: 1 13/16″ x 6 3/4″ x 12 15/16″
• Weight: 6.5 lbs

2000W Peak (1944W RMS) APMI Series Class-D Monoblock 1-Ohm Stable Mosfet Car Amplifier

Conclusion

By our suggestions above, we hope that you can found car amplifier monoblock with cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!