owneaster 
Nowadays, there are so many products of compression fitting valve for ice maker in the market and you are wondering to choose a best one. You have searched for compression fitting valve for ice maker in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings compression fitting valve for ice maker which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Frizzlife Brass Feed Water Adapter – 3/8 inch,3/8 inch Comp and 1/4 inch OD Compression Angle Stop Valve Adapter for Reverse Osmosis Water Filters, Coffee Brewers,Ice Maker
- ALL BRASS MATERIAL
- Fits 3/8″ OD angle valve(9/16-24UNEF)
- TEE UNION ADAPTER: 3/8″ Thread male(Diamater 14.28mm) x 3/8″ thread female(Inner diameter 12.96mm) x 1/4″ tube(Plastic Tubing only) quick connect with compression.
- ROUGH BRASS CONSTRUCTION: Full copper material to prevent leakage
- INSTALLS IN SECOND: extremely easy to load and unload.
- APPLICATIONS: Adapt to most home kitchen feed water supply to Water filters, Reverse Osmosis water system, etc. Fits for angle stop valve BrassCraft, EZ-Fluid, PROCURU, SharkBite
- LEAD FREE PRODUCT
SharkBite 24983A Service Tee Stop Valve, 1/2 inch x 1/2 inch x 1/4 inch, Quarter Turn, Compression Service Stop Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
- INSTALLS IN SECONDS: 1/2″ x 1/2” x 1/4″ threaded compression tee shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
- PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications
- COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
We use high quality DZR Lead Free Brass for our 1/2” x 1/2” x 1/4” 1/4 Turn Tee Stop Valve. Chrome plated valve for an attractive appearance. This SharkBite Tee Stop allows you to easily and effortlessly tap into a current or new plumbing line and run a 1/4” compression line out to an end fixture. Makes it easy to add a humidifier, dishwasher, ice maker, faucet installation or toilet installation to a new or existing line. Alternatively, can be used as a saddle valve.
Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.
Litorange 2 Pack Lead Free Brass Mini Ball Valve Shut Off Switch, 1/4 inch Compression by 1/4 Compression Fitting
- ★ Material: Lead Free Brass.
- ★ Size: 1/4 inch compression x 1/4 inch compression valve.
- ★ 180 degree valve closing range, the handle can close the valve by rotating it to either side of the valve body
- ★ Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- ★ Package include: 2 PCS 1/4 inch compression x 1/4 inch compression. Comes with 1 year warranty.
★Material:
Lead free brass,much more heathy for human.
★Package include:
2 PCS 1/4 inch compression x 1/4 inch compression
Similar items with 4 stars and above
PEX Ice Maker Installation Kit – 25 Feet of Tubing For Appliance Water Lines With Stop Tee For Quick Installation, 1/4” Compression Fittings, Flexible Hose For Potable Drinking Water
- COMPLETE ICE MAKER WATER LINE KIT: Crosslinked High Density Polyethylene, PEX, hose is extremely durable. It won’t corrode and can’t be damaged from expansion or contraction. Easily withstands temperature and pressure stresses that occur in water systems. Flexible, one piece design includes 1/4” compression fittings at each end. Perfect for refrigerator, freezer, humidifier and water filter connections.
- INSTALLS IN MINUTES AND LEAVES NO ODORS OR BAD TASTE: Complete your maintenance or fix your appliances quickly and easily. This kit is designed to get the job done fast without inconveniencing yourself or other members of your household. The stop tee valve quickly and neatly connects to your current set up to divert the water where you want it to go.
- COPPER STOP TEE allows you to safely use this set up for your ice makers, humidifiers, water filters and other potable drinking water applications. Stop tee measures 1/4″ x 3/8″ x 3/8″ and is ready to connect to existing supply stops.
- HIGH QUALITY AND SAFE PEX AND COPPER. The PEX tubing is extremely reliable and long lasting. It is NSF 14, NSF 61 and ASME A112.18.6 certified. The copper stop tee is sturdy, durable, and long lasting. Great for both contractors and DIYers. Includes clear instructions to complete your set up quickly.
- LIMITED LIFETIME WARRANTY. 25 feet of PEX tubing and 1/4” x 1/4” compression fitting. Stop tee measures 1/4″ x 3/8” x 3/8”. Limited lifetime warranty. Choice Hose and Tubing part number 509 5164K.
Complete Ice Maker And Humidifier Installation Kit | 25’ PEX Tubing, With Easy To Use Stop Tee, Includes Everything Necessary For A Complete Installation
Frizzlife 1/2" and 3/8" Brass Feed Water Adapter – 3/8" Comp with 1/2" Converter Fitting and 1/4 inch OD Compression Angle Stop Valve Adapter for Reverse Osmosis Water Filters, Coffee Brewers
- ALL BRASS MATERIAL
- Fits both 3/8″ OD angle valve(9/16-24UNEF) and 1/2″ OD angle valve.
- ✔TEE UNION ADAPTER: 3/8” male and female compression fittings x 1/4″ tube quick connect, and two 1/2″ NPT converter fittings.
- ✔TWO EXTRA CONVERTER FITTINGS: Fitting A : 1/2″ male NPT and 3/8″ female NPT threaded connections
- Fitting B: 3/8″ male NPT and1/2″ female NPT threaded connections.Allows to connect both 1/2″ and 3/8″ water supply.
- ✔ROUGH BRASS CONSTRUCTION: Full copper material to prevent leakage, strong and long lasting life time
- ✔LEAD FREE PRODUCT & INSTALLS IN SECOND: extremely easy to load and unload.
- ✔APPLICATIONS: Adapt to most home kitchen feed water supply with 1/2″ or 3/8″ to Water filters, Reverse Osmosis water system, ice maker, etc.
Frizzlife feed water valve. White polypropylene with food grade EPDM o-rings, connects between valve and riser to the main water supply line for application in reverse osmosis, filtration systems, automatic coffee brewers, and ice-makers. Not for use with compressed air, explosive gases, petroleum spirits and other fuels, or for heating systems. Sizes indicated are thread male compression x thread female compression x tube OD. Including: TEE UNION ADAPTER: Size: 3/8″ Thread male x 3/8″ thread female x 1/4″ tube quick connect with compression. Fitting A : 1/2″ male NPT and 3/8″ female NPT threaded connections Fitting B: 3/8″ male NPT and1/2″ female NPT threaded connections If your water angle valve is 1/2″ OD, use both TEE union adapter and two fittings to connect the angle valve and water hose. If your water angle valve is 3/8″ OD, only use the Tee union adapter to connect the angle valve and water hose. Water Systems feed water angle stop valve adapter has 3/8” male and female compression and two NPT thread 3/8″ to 1/2″ converter fitting for easy installation on most under-sink cold water supply and faucet water lines. The ¼” Tube OD quick connect fitting allows for easy connection to reverse osmosis systems water filter, ice makers and other potable water applications.
METPURE EZ RO Universal Water Supply Adapter
Metpure EZROADP14 water supply valve allows users to connect and disconnect 1/4″ water supply outlets quick and easy without the need of any other tools. Applications include reverse osmosis drinking water, multimedia filters, beverage dispensing, coffee machines, RV and Marine, misting systems, ice makers and many more.
WATTS P-667 Ice Maker Tee Valve, 1/2-Inch Cts x 1/4-Inch Od
- 1/2 Cts x 1/2 Cts x 1/4 O.D. Quick connect tee valve for use with 1/2″ Copper, PEX, CPVC, polybutylene and 1/4″ O.D. Pex, polyethylene or copper Supply lines for ice makers and water connections
- Made from high quality materials and highly durable
- Manufactured in China
- Watts quick connect products are the easiest method on the market for joining copper, CPVC, and PEX (LDPE, MDPE, HDPE) tubing
- Plastic quick connect TEE with 1/2-Inch CTS on two sides with 1/4-Inch OD ball valve on third side
- Perfect for DIY pipe repair
- Approvals include FDA, ANSI/NSF-61, NSF-14, CSA B1375, ASTM F877, NSF-UP, and IAPMO ASSE 1061-2006
- Rated for 250psi at 75 degrees F and 100psi at 180 degrees F
Product Description
1/2 CTS x 1/2 CTS x 1/4 O.D. quick connect tee valve for use with 1/2” copper, PEX, CPVC, and 1/4” O.D. PEX, polyethylene or copper supply lines for ice makers and water connections in refrigerators.
From the Manufacturer
This fitting incorporates stainless steel gripping teeth in the collets. These corrosion resistant teeth allow the connectors to interconnect with multiple materials without the need for special tools. It works with copper, CPVC, and PEX (LDPE, MDPE, HDPE) tubing.
Dual Compression Outlet Angle Stop Valve, Plumbing Fitting, Quarter Turn, Single Handle Multi-Select Positions, Water Valve Shut Off 1/2 inch x (3/8 inch x 1/4 inch)
- 1/2″ copper inlet x 3/8” OD outlet x 1/4” OD Outlet. Great for splitting 1 to 2 outlets to ice maker or water filtration system.
- Patented single lever, quarter turn, multi-control on/off position selections.
- Great for residential and commercial applications. For use with cold or hot water feed with water temperatures of 40-140 Degrees Fahrenheit.
- High quality, shiny chrome-plated brass made from lead free compliant material.
- Solid, lead-free, single piece brass construction. Includes all compression rings and nuts.
SharkBite 25024 Plumbing Installation Kit
- Lead free dzr Brass construction for Durability and reliability
- For use with Copper or cpvc pipe
- Innovative push-to-connect design makes for quick and easy installation
- Corrosion resistant to improve longevity
- Listed by iapmo and design certified and listed to asse 1061/NSF 61
The SharkBite ice maker installation kit has everything you need to install the water supply to your ice maker. The kit includes 1 SharkBite 1/2 in. Service slip tee, one 1/2 in. X 1/4 in. (3/8 in. O.D.) push-to-connect angle stop valve, a 10 ft. Coil of 1/4 in. Pex pipe, one 1/4 in. (3/8 in. O.D.) SharkBite x 1/4 in. O.D. Compression connector, and a 1/2 in. And 1/4 in. Disconnect clip to remove the pipe from the fitting if needed. The SharkBite service slip tee allows you to remove up to 2 in. Of your existing copper or cpvc line and add an angle supply stop valve. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool so fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. The included 10 ft. Pex coil connects to the push-to-connect angle stop valve 1/4 in. Outlet and the 1/4 in. Ice maker connector which will thread onto your ice maker. The pipe can be cut to the exact length needed so there is no excess supply line to coil providing a clean, tangle free look.
Conclusion
By our suggestions above, we hope that you can found compression fitting valve for ice maker for you.Please don’t forget to share your experience by comment in this post. Thank you!
