Top 10 Dewalt 10 Contractor Blade

Product description

DW7140PT Features: -10″ 40 Tooth ATB ripping and crosscutting saw blade. -0.63″ Arbor and tough coat finish. -Prec trim coated thin kerf. -Dimensions: 0.45″ H x 11.5″ W x 10.1″ D.

From the Manufacturer

DeWalt DW7140PT 10-Inch 40 Tooth ATB Ripping and Crosscutting Saw Blade with 5/8-Inch Arbor and Tough Coat Finish

Product Description

The ultimate combination blade is now available in a thin kerf design with Freud’s LU83R. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this combination blade, there is no need for stabilizers.

Amazon.com

The 10-inch Freud LU83R010 Thin Kerf Combination Saw Blade offers a configuration that pairs flat teeth and alternating-top-bevel teeth to ensure strong performance both when ripping and when crosscutting. Also offering TiCo high-density carbide tips, laser-cut, anti-vibration slots that eliminate the need for stabilizers, and Freud’s insulating, Perma-SHIELD coating, this multi-purpose blade is built for lasting convenience.

LU83R010 Thin Kerf Combination Saw Blade At a Glance: Ideal for crosscutting materials 3/4 to 3-1/2 inches thick, and ripping materials 3/8 to 1-1/2 inches thick Heavy-duty plate with laser-cut, anti-vibration slots Tough Perma-Shield coating reduces friction and heat buildup Technical Specs: Coating Perma-SHIELD Diameter 10″ Teeth 50 COMB Arbor 5/8″ Kerf (K) .091 Plate (P) .071

Thin Kerf requires less power and allows for faster feed rate Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life, and giving a crisp, flawless finish

Combination Tooth Design for Versatility and Accuracy
This thin-kerf blade’s 50 teeth are arranged in groups of five, each of which includes one flat-top raker tooth for fast, accurate ripping. Each flat tooth is followed by four alternating-top-bevel (ATB) teeth that are particularly well suited to crosscutting, and large gullets between the teeth ensure effective chip clearance.

This blade is designed for optimal performance when crosscutting materials that are 3/4 to 3-1/2 inches thick, or ripping materials that are 3/8 to 1-1/2 inches thick. It makes quick work of hard- and softwood, plywood, and chipboard. It can also handle laminates or tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a .091 kerf.

And because thin-kerf blades remove less material than standard carbide blades, they allow for faster feed times, and they require less horsepower to produce smooth, accurate results when cutting.

Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. Furthermore, this well-balanced, anti-vibration design means there’s no need to use add-on stabilizers with this blade.

High-Density Carbide for Maximum Cutting Performance
This thin-kerf saw blade’s 50 teeth are finished with tips made from Freud’s application-specific TiCo high-density carbide “combination blend.” Formulated to help the blade maintain a sharp cutting edge for longer when faced with a variety of applications, this blend includes just a little bit more high-density tungsten carbide than other TiCo blends. And it still offers the full mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo.

With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer–saving you time and money.

Perma-SHIELD Coating Reduces Friction and Heat Buildup
Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud’s red Perma-SHIELD–a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.

As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or “pitch” buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud’s limited lifetime warranty.

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud’s full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What’s in the Box
Freud LU83R010 Thin Kerf Combination Saw Blade–10-inch diameter, 5/8-inch arbor, 50-tooth COMBO design.

See all Product description

Product Description

Freud D1040X Diablo 10-inch 40-Tooth ATB general Purpose Saw blade with 5/8-inch arbor and permashield coating.

Amazon.com

For a highly versatile blade that makes clean cuts in a broad variety of wood types, look no further than the Freud D1040X Diablo 10-Inch General Purpose Saw Blade. This is your go-to blade for slicing through oak, pine, plywood, pressure-treated lumber, and beams. Ideal for a wide variety of applications, this blade reduces the need to change blades between tasks. For strong, long-lasting resistance, the blade features a tough steel plate and high-density carbide tips.

Model # D1040X Diameter 10″ Machine Use Miter Saw, Table Saw Application General Purpose Teeth 40 ATB (Alternate-Top Bevel) Arbor 5/8″ Kerf .098″ Hook Angle 15°

Makes Clean Cuts in a Wide Variety of Wood
Achieving premium results when performing any kind of woodworking is all about clean, accurate cuts. The Freud D1040X makes this process easy, fast, and precise. An added time-saving feature, its general-purpose versatility will let you employ it job after job. This blade is even suited to making rip cuts, often achieving a smoother finish than dedicated ripping blades.

Contractors, construction workers, and avid do-it-yourselfers will want to keep this blade on hand for varying jobs that call for making rips and crosscuts in both hardwoods and softwoods. Appropriate application materials include oak, pine, plywood, pressure-treated lumber, and beams.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1040X’s clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade’s 40 ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade’s position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade’s laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade’s cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D1040X is designed for durability. The blade’s hardy teeth are protected by Freud’s exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws
The Freud D1040X is a great addition to your workshop because it’s designed with the versatility to fit a variety of table and miter saws, including sliding miter saws.

This product is covered by Freud’s Limited Lifetime Warranty.

What’s in the Box
Freud D1040X Diablo 10-Inch General Purpose Saw Blade.

See all Product description

Product Description

Freud D1080X Diablo 10-inch 80-Tooth ATB finish saw blade with 5/8-inch arbor and permashield coating.

Amazon.com

For a blade dedicated to cutting ultra-fine finish work with remarkably clean, chip-free results, look no further than the Freud D1080X Diablo 10-Inch Ultra-Fine-Finish Saw Blade. Ideal for fine cabinetmaking, this is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips.

Model # D1080X Diameter 10″ Machine Use Miter/Slide Miter Saw, Table Saw Application Finishing Teeth 80 Hi-ATB Arbor 5/8″ Kerf .098″ Hook Angle 15°

Makes Clean, Chip-Free Cuts in Delicate Finish Work
Achieving premium results when creating finish crosscuts in ultra-fine materials is all about clean, accurate cuts. The Freud D1080X makes this process easy, fast, and precise. To save you time, most cuts made by this blade require little to no sanding.

Trim carpenters, fine cabinetmakers, and avid do-it-yourselfers will want to keep this blade on hand for those special jobs that call for making ultra-fine finish crosscuts in delicate pieces. Appropriate application materials include oak, pine, melamine, veneer plywood, and delicate molding.

Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1080X’s clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.98-inch kerf between the blade’s 80 Hi-ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade’s position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.

An added bonus, the blade’s laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade’s cutting life.

Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D1080X is designed for durability. The blade’s hardy teeth are protected by Freud’s exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.

Fits Miter and Table Saws
The Freud D1080X is a great addition to your workshop because it’s designed with the versatility to fit a variety of table and miter saws, including sliding miter saws.

This product is covered by Freud’s Limited Lifetime Warranty.

What’s in the Box
Freud D1080X Diablo 10-Inch Ultra-Fine-Finish Saw Blade.

See all Product description

With a 10″ diameter and a 5/8″ arbor, the Hitachi Finish / Combination saw blade set includes one combination blade and two finish saw blades designed for use with most 10-inch miter and table saws. With a range of 40 Teeth to 80 Teeth, these Hitachi blades are ideal for cutting roughly or precise in all types of wood. With 40, 60, or 80 durable carbide teeth, these blades can make precision cuts for general finish work and can be used in framing and decking as well. 40 Tooth Combination Blade: Ideal for crosscutting and ripping of plywood, wood composites, and natural woods, the 40 Tooth Combination Blade is designed for all-around use when rips and crosscuts must be made with one saw blade. 60 Tooth and 80 Tooth Finish Blades: Ideal for making precision cuts for general finish work, the 60 Tooth and 80 Tooth Finish Blades can be used in framing and decking as well. Guide to Understanding Saw Blades and Terms: ATB / Alternate Top Bevel – Tool grind where the bevel alternates from left to right. ATB gives the cleanest crosscut in hard and soft wood or plywood. Hook – Angle of tooth relative to the blade radius determines aggressiveness of cut and work piece finish. Kerf – The width of a saw cut made in a board, the measured width of material removed by the passage of the saw blade. Carbide – Carbide alloy is composed of Cobalt and Tungsten. This alloy gives saw blades longer lasting tips, shaper cutting edges, and greater impact resistance. Grind: ATB – Alternate Top Bevel. Kerf: .106″ Hook: 18Degree Carbide Grade: C2.

Product Description

Ideal for all cutting in softwood, hardwood, chip board, or plywood. Thin kerf for fast and smooth cutting action. Computer balanced plate reduces vibration for improved accuracy and better finish.

Amazon.com

The DEWALT DW3106P5 saw blade combination pack contains a 10-inch DW3106 60-tooth fine-finish blade and a DW3103 32-tooth general purpose saw blade. Perfect for miter saw and slide miter saw jobs with softwood, hardwood, chipboard, and plywood, these slim-kerf blades offer quick and even incisions with minimum excess debris. A patent wedge shoulder places additional steel in back of every tip, maximizing strength and precision. Get the cutting action you need at the right price with this heavy-duty combination pack.

CRAFTSMAN saw blades are a great value for an economy blade. Induction-brazed carbide teeth provide durability and long life, while precision grinding makes for smooth accurate cuts. The steel plate is heat-treated to reduce warping and then a corrosion resistant coating is added to prevent rust.

Product Description

In many woodworking shops, one saw must serve multiple purposes. It must rip a piece of 4/4 oak and also crosscut a sheet of 3/4″ plywood. The groups of five teeth include one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective clearance. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. With this ultimate combination blade, there is no need for stabilizers.

Amazon.com

The 10-inch Freud LU84R011 Combination Saw Blade with Perma-SHIELD offers a configuration that pairs flat teeth and alternating-top-bevel teeth to ensure strong performance both when ripping and when crosscutting. Also offering TiCo high-density carbide tips, laser-cut, anti-vibration slots that eliminate the need for stabilizers, and Freud’s Perma-SHIELD coating to prevent the buildup of friction and heat, this multi-purpose blade is built for lasting convenience.

Combination Tooth Design for Versatility and Accuracy
This blade’s 50 teeth are arranged in groups of five, each of which includes one flat-top raker tooth for fast, accurate ripping. Each flat tooth is followed by four alternating-top-bevel (ATB) teeth that are particularly well suited to crosscutting, and large gullets between the teeth ensure effective chip clearance.

This blade is designed for optimal performance when crosscutting materials that are 3/4 to 3-1/2 inches thick or ripping materials that are 3/8 to 1-1/2 inches thick. It makes quick work of hard- and softwood, plywood, and chipboard. It can also handle laminates or tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a .126 kerf.

Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. Furthermore, this well-balanced, anti-vibration design means there’s no need to use add-on stabilizers with this blade.

High-Density Carbide for Maximum Cutting Performance
This combination saw blade’s 50 teeth are finished with tips made from Freud’s application- specific TiCo high-density carbide “combination blend.” Formulated to help the blade maintain a sharp cutting edge for longer when faced with a variety of applications, this blend includes just a little bit more high-density tungsten carbide than other TiCo blends. And it still offers the full mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo.

With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer–saving you time and money.

Perma-SHIELD Coating Reduces Friction and Heat Buildup
Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud’s red Perma-SHIELD–a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.

As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or “pitch” buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud’s limited lifetime warranty.

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud’s full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What’s in the Box
Freud LU84R011 Combination Saw Blade–10-inch diameter, 5/8-inch arbor, 50-tooth COMBO design.

The DEWALT DW3106P5D0I Series 20 10-Inch 60T Fine Finish Saw Blade (2pk) is ideal for all cutting applications in softwood, hardwood, chip board or plywood using a table saw or miter saw. Professional quality thin kerf carbide saw blades produce a smooth finish with minimal material waste.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Dewalt 10 Contractor Blade, eg:

• What are Top 10 Dewalt 10 Contractor Blade for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Dewalt 10 Contractor Blade to buy?
• What are Top Rated Dewalt 10 Contractor Blade to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Dewalt 10 Contractor Blade?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Dewalt 10 Contractor Blade.
• Before deciding to buy any Dewalt 10 Contractor Blade, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Dewalt 10 Contractor Blade and What you should consider when buying the Dewalt 10 Contractor Blade and Where to Buy or Purchase the Dewalt 10 Contractor Blade. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Dewalt 10 Contractor Blade of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Dewalt 10 Contractor Blade.