The 9 Best Heating Mat Ipower

The power reptile heating pad is specifically designed to be used on standard glass terrarium for reptiles, amphibian, small animals, or plant terrarium. Compare with other general heat pad in current market, our heat pad is made of a new heating film which inserted in the pad, providing the suitable temp equably in several minutes. Our power heaters range from 4 to 24 watts making them extremely economical in operate. It also can be used for thermostat and/or in conjunction with an additional heat source higher temperature species. Improved Design: New heating film and insulation increases overall heat transfer across the mat. Reach desired temperatures within minutes. 3M Adhesive Paper: Provides a strong grip to the contact area. The heat mat stays exactly where you want it. Energy Efficiency: Reach desired temperatures in a shorter amount of time while consuming less power than competing products. Specifications: S : 4″x7″ 4 watt — 1-5 Gallon M : 6″x8″ 8 watt — 10-20 Gallon L : 8″x12″ 16 watt — 30-40 Gallon XL : 8″x18″ 24 watt — 50-60 Gallon Features: 1. Size: 8″x12″ ; 16W; Length of cord: 6fts 2. 120V US voltage and Standard Plug and No adapter needed 3. Easy to clean and convenient to use 4. Provide quick warm and save energy 5. Waterproof and moisture proof designed 6. UL listed for safety 7. 1 year manufacture 8. Keep reptile tank warm without any harm to your pets 9. With this pet heat mat, your pets will not need to worry about it would get cold. 10. Suitable for: turtles, snakes, lizards, Gekkonidae, small mammals, spider, crawler, etc. At room temperature 68°F(20°C), the surface temperature of the heat pad is about 86°F(30°C). This result is measured under experimental conditions, and the actual data will be slightly different.

The iPower reptile heating pad is specially designed to be used on standard glass terrarium for reptile, amphibian, small animal, or plant terrariums. Compared with other general heat pads on the market, our heat pad includes a new proprietary heating film technology that allows the pad to reach desired temperatures faster.

Also included is the new and improved digital heat mat controller. The new iPower heat mat thermostat is digital for greater accuracy. It provides constant customized temp for fermentation, reptiles or brewing.

Specifications

1 – Heat Mat (8″x 18″ Watt: 24W) / 1 – Digital Thermostat (120 Volts / 8.3 Amps Max /60 HZ)

S : 4″x7″ 4 watt — 1-5 Gallon
M : 6″x8″ 8 watt — 10-20 Gallon
L : 8″x12″ 16 watt — 30-40 Gallon
XL : 8″x18″ 24 watt — 50-60 Gallon

Improved Design：
New heating film and insulation increases overall heat transfer across the mat. Reach desired temperatures within minutes.

3M Adhesive Paper：
Provides a strong grip to the contact area. The heat mat stays exactly where you want it.

Energy Efficient：
Reach desired temperatures in a shorter amount of time while consuming less power than other heat mat products.

About Our Digital Thermostat：
Temperature can be set from within a wide range, 40°F – 108°F (5-42°C)
The controller is compatible with most heat mats and ready to plug into North American outlets
Delivers excellent results for seedling germination, plant growth, reptile, or brewing
The thermostat controller is rigorously tested to ensure the safety of your plants, pets and DIY projects.

The iPower seedling heat mat will increase the success of seedlings and cuttings, perfect for seeding germination, homebrewing, and pet enclosures terrariums, such as reptile, rodent and arachnid.

The new and improved iPower digital heat mat controller is digital for greater accuracy. It provides constant customized temp seed germination, reptiles and brewing.

Feature

• 48″ x 20″ heat mat fits under one common seed flat
• Warms root area 10-20°F over ambient temperature to improve germination
• Provides constant temperature to improve vegetable, plant, herb, and flower seed germination
• Waterproof design allows you to scrub and easier cleaning
• Durable internal insulated wiring for enhanced safety
• Heat mat thermostat controls temperature in colder or warmer environments
• Provides constant optimum temperatures for specific crops
• Digital thermostat provides temperature control between 40°F-108°F (5-42°C), temperature display range: 32 -140°F
• Specs: 120 Volts / 8.3 Max Amps / 60 HZ / 1000 Watts
• Easy plug-in operation with LED illuminated indicator lights & three-prong grounded plug
• ETL certification is proof that a product complies with widely-accepted safety standards
• 1 Year Manufacturer Warranty

Seeding Heat Mat Setup Instructions

• Place sensor into the rooting area about 1″- 1-1/2″
• Position thermostat up and away from seedling trays and stray water. Do not submerge
• Plug heat mat into thermostat
• Plug in thermostat power cord and set maximum desired temperature

Heat mat thermostat can also be used to control the temperature of many other appliances as long as they don’t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat, and set the desired temperature.

Abnormal Warning

• if thermostat shows “E1”, it means that the actual temperature is lower than 0 degree Celsius or 32.0 degrees Fahrenheit
• if thermostat shows “E2”, it means that the actual temperature is higher than 60.0 degrees Celsius or 108.0 degrees Fahrenheit
• if thermostat shows “E3”, it means that the temperature sensor is not working properly. Please re-install the sensor

About iPower:

• iPower is one of the leading professional hydroponics suppliers over a decade.
• Our goal is to put our best products in every home & garden where needed.
• We only provide the premium quality components and reliable service.

The iPower is engineered for better performance and greater durability. The new, stronger heating wire and thicker multi-layer construction offers more uniform heating and the durability to withstand rugged greenhouse environments. This seedling heat mat will increase the success of seedlings and cuttings, and will warm the root area 10-20°F over ambient temperature to improve germination. Perfect for seeding, germination, home-brewing, and pet enclosures terrariums, such as those used in reptile, rodent and arachnid.  10″ x 20. 5″ heat mat; Fits under one common seed flat Gently warms root area to improve germination Increases success of seedlings and cuttings Warms root area 10-20°F over ambient temperature to improve germination Provides constant temperature to improve vegetable, plant, herb, and flower seed germination.  Waterproof design allows for you to scrub and easier cleaning Durable, internal insulated wiring for enhanced safety Heavy duty multi-layer construction Length of Power Cord: 5. 90ft 1 Year Manufacturer  Entire seedling heat mat MET listed, ETL listed seedling heat mat cord Specifications: 10″x 20. 5″: 17. 5W +/-2W; 20″x 20″: 45W +/-5W; 48″x 20″: 100W +/-10WAbout iPower:  iPower is one of the Leading Professional Suppliers Over a Decade.  Our goal is to put our best products in every home garden where needed.  We provide the premium quality components and reliable service.

“The iPower heat mat thermostat provides constant customized temp seed germination, reptiles and brewing. It is ideal for maintain rooting temperature in a tray and dome. Ideal in homebrewing for maintaining desired fermentation temperature, and perfect for temperature control in reptile terrariums and small pet enclosures. This heat mat controller is compatible with all heat mats, but is optimized for iPower seedling heat mats. Features: 1.Controls temperature in colder or warmer environments 2.Digital temperature controller for heat mat 3.Provides constant optimum temperature for specific crops 4.Digital thermostat provides temperature control between 40°F-108°F (5-42°C), temperature display range: 32 -140°F 5.Celsius or Fahrenheit read-out 6.Specs: 120 Volts / 8 Max Amps / 60 HZ / 1000 Watts 7.Easy plug-in operation with LED illuminated indicator lights & three-prong ground plug 8.CETL certification is proof that a product complies with widely-accepted safety standards 9.1 Year Manufacturer Warranty Seeding Heat Mat Setup Instructions： Place sensor into the rooting area about 1″”- 1-1/2″” Position thermostat up and away from seedling trays and stray water. Do not submerge Plug heat mat into thermostat Plug in thermostat power cord and set maximum desired temperature Heat mat thermostat can also be used to control the temperature of many other appliances as long as they don’t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat, and set the desired temperature. NOTE: Please note that the controller can only be used to power off heating equipment at setting temperature and does not increase the heating power of the heating equipment. Abnormal Warning： If thermostat shows “”E1″”, it means that the actual temperature is lower than 0 degree Celsius or 32.0 degrees Fahrenheit If thermostat shows “”E2″”, it means that the actual temperature is higher than 60.0 degrees Celsius or 108.0 degrees Fahrenheit If thermostat shows “”E3″”, it means that the temperature sensor is not working properly. Please re-install the sensor”

The power reptile heating pad is specifically designed to be used on standard glass terrarium for reptiles, amphibian, small animals, or plant terrarium. Compare with other general heat pad in current market, our heat pad is made of a new heating film which inserted in the pad, providing the suitable temp equably in several minutes. Our power heaters range from 4 to 24 watts making them extremely economical in operate. It also can be used for thermostat and/or in conjunction with an additional heat source higher temperature species. Improved Design: New heating film and insulation increases overall heat transfer across the mat. Reach desired temperatures within minutes. 3M Adhesive Paper: Provides a strong grip to the contact area. The heat mat stays exactly where you want it. Energy Efficiency: Reach desired temperatures in a shorter amount of time while consuming less power than competing products. Specifications: S : 4″x7″ 4 watt — 1-5 Gallon M : 6″x8″ 8 watt — 10-20 Gallon L : 8″x12″ 16 watt — 30-40 Gallon XL : 8″x18″ 24 watt — 50-60 Gallon Features: 1. Size: 8″x18″ ; 24W; Length of cord: 6fts2. 120V US voltage and Standard Plug and No adapter needed 3. Easy to clean and convenient to use 4. Provide quick warm and save energy 5. Waterproof and moisture proof designed 6. UL listed for safety 7. 1 year manufacture 8. Keep reptile tank warm without any harm to your pets 9. With this pet heat mat, your pets will not need to worry about it would get cold. 10. Suitable for: turtles, snakes, lizards, Gekkonidae, small mammals, spider, crawler, etc.

The iPower is engineered for better performance and greater durability. The new, stronger heating wire and thicker multi-layer construction offers more uniform heating and the durability to withstand rugged greenhouse environments.

This seedling heat mat will increase the success of seedlings and cuttings, and will warm the root area 10-20°F over ambient temperature to improve germination. Perfect for seeding, germination, home-brewing, and pet enclosures terrariums, such as those used in reptile, rodent and arachnid.

 10″ x 20.5″ heat mat; Fits under one common seed flat
 Gently warms root area to improve germination
 Increases success of seedlings and cuttings
 Warms root area 10-20°F over ambient temperature to improve germination
 Provides constant temperature to improve vegetable, plant, herb, and flower seed germination.
 Waterproof design allows for you to scrub and easier cleaning
 Durable, internal insulated wiring for enhanced safety
 Heavy duty multi-layer construction
 Length of Power Cord: 5.90ft
 1 Year Manufacturer Warranty
 Entire seedling heat mat MET listed, ETL listed seedling heat mat cord
 Specifications: 10″x 20.5″: 17.5W +/-2W; 20″x 20″: 45W +/-5W; 48″x 20″: 100W +/-10W

About iPower:

 iPower is one of the Leading Professional Suppliers Over a Decade.
 Our goal is to put our best products in every home&garden where needed.
 We provide the premium quality components and reliable service.

The iPower heat mat thermostat provides constant customized temp seed germination, reptiles and brewing. It is ideal for maintain rooting temperature in a tray and dome. Ideal in homebrewing for maintaining desired fermentation temperature, and perfect for temperature control in reptile terrariums and small pet enclosures. This heat mat controller is compatible with all heat mats, but is optimized for iPower seedling heat mats. Features: 1. Controls temperature in colder or warmer environments2. Digital temperature controller for heat mat3. Provides constant optimum temperature for specific crops4. Digital thermostat provides temperature control between 40°F-108°F (5-42°C), temperature display range: 32 -140°F5. Celsius or Fahrenheit read-out6. Specs: 120 Volts / 8 Max Amps / 60 HZ / 1000 Watts7. Easy plug-in operation with LED illuminated indicator lights & three-prong ground plug8. CETL certification is proof that a product complies with widely-accepted safety standards9. 1 Year Manufacturer Seeding Heat Mat Setup Instructions：Place sensor into the rooting area about 1″- 1-1/2″Position thermostat up and away from seedling trays and stray water. Do not submergePlug heat mat into thermostatPlug in thermostat power cord and set maximum desired temperatureHeat mat thermostat can also be used to control the temperature of many other appliances as long as they don’t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat, and set the desired temperature. NOTE: Please note that the controller can only be used to power off heating equipment at setting temperature and does not increase the heating power of the heating equipment. Abnormal Warning：If thermostat shows “E1”, it means that the actual temperature is lower than 0 degree Celsius or 32. 0 degrees FahrenheitIf thermostat shows “E2”, it means that the actual temperature is higher than 60. 0 degrees Celsius or 108. 0 degrees FahrenheitIf thermostat shows “E3”, it means that the temperature sensor is not working properly. Please re-install the sensor

Conclusion

By our suggestions above, we hope that you can found heating mat ipower for you.Please don’t forget to share your experience by comment in this post. Thank you!