owneaster 
Nowadays, there are so many products of heating pipe with fins in the market and you are wondering to choose a best one. You have searched for heating pipe with fins in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating pipe with fins which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Slant/Fin Revital/Line Aluminum Baseboard Heater Cover Complete Replacement Kit with 2 End Caps – Available in Sizes 2-6 Feet – Maximum Heat Output, Brite White
- COMPLETE REPLACEMENT KIT- Replace your aging baseboard cover and transform the look of any room in minutes with the Revital/Line full baseboard heater cover kit. Includes 1 durable aluminum replacement baseboard cover and 2 galvanized steel 4″ end caps (left and right)
- MAXIMUM HEAT OUTPUT- The Slant/Fin replacement baseboard covers are lab tested to provide you with up to 40% more heat output than other competing replacements. Heats your rooms more efficiently saving you energy and money
- DURABLE RECYCLED ALUMINUM- Made from 100% recycled rust-proof extruded aluminum and beautifully powder coated in brite white for a durable, enamel-like finish. Give your baseboard heaters a sleek and modern look with a replacement heater cover that is built to last
- EASY TO INSTALL- Designed to fit hydronic baseboards measuring up to 8.5″ H x 3″ D allowing them to fit over 90% of standard residential hydronic baseboard heaters. No tools needed for most installations – remove old front panel and damper then simply slip the pre-cut cover over the existing back panel and that’s it!
- HYDRONIC BASEBOARDS ONLY- The Revital/Line baseboard heater covers can be used on ONLY hydronic (hot water) heaters. DO NOT use on an electric baseboard heating system. All Slant/Fin products are proudly made in the USA
Slant/Fin Revital/Line Aluminum Replacement Baseboard Heater Cover Kit with 2 End Caps
A quick and easy solution for your old aging baseboard covers! Breathe new life into your baseboard and give any room a sleek and modern feel.
Why Slant/Fin Revital/Line Baseboard Covers?
America’s #1 Baseboard Brand – We have been providing you with the highest-quality heating system products since 1949. All made right here in the USA
Features:
Revitalize and makeover any room in your home… quickly and easily… with a pre-cut, snap-in-place baseboard cover.
- Made from durable, rust-proof extruded aluminum material that is built to last your baseboard heating system for years and years
- Standard color is Brite White
- Powder coated with an enamel-like finish – A perfect makeover for any aging baseboard
- 6.25″ H x 3″ D with available lengths: 2′, 3′, 3.5′, 4′, 5′ and 6’
- A new Revital/Line heat cover will provide you with up to 40% more heat output than other competitive brands
- Easy removal for easy cleaning
Easy To Install:
Slant/Fin’s Revital/Line pre-cut replacement covers will fit 90% of standard hydronic baseboards measuring up to 8.5″ H x 3″ D. Fits both Slant/Fit baseboard and other competitors!
Designed to snap over your existing back panel with no tools required.
- Measure your current baseboard and choose the correct size you need
- Remove the old accessories: front panel and damper
- Slip on the new baseboard cover and you are ready for full energy efficient heat!
***USE FOR HYDRONIC (HOT WATER) BASEBOARD HEATERS ONLY***
DeLonghi TRD40615E Full Room Radiant Heater
- 1500 watts of heating power, silent operation, For rooms up to 144 sq feet
- High quality, patented steel assembly – permanently sealed oil reservoir – never needs refilling. Heating power – Med (W): 800
- Up to 40% more heat surface for faster heat up
- Patented thermal chimneys engineered to maximize heat flow yet maintain a low surface temperature
- Digital controls – Adjustable thermostat, Timer and multiple heat settings
- ECO function saves energy by automatically adjusting heat and power settings for the most comfortable and economical warmth
- Patented smart-snap wheels snap into place perfectly no assembly required
- Safe Heat features: thermal cutoff, anti-freeze setting to help prevent freezing pipes. Setting the temperature to 41°f (5°C), the appliance will activate the antifreeze function
Aikoper Space Heater, 1500W Oil Filled Radiator heater with 24-Hours Timer, Remote Control, Digital Thermostat, Tip-over & Overheat Protection, Electric Portable Heater for Full Room Indoor Office
- 【Meet Your Heating Needs 】 Three heat settings ( 600w/900w/1500w ) and ECO mode,Best for medium to large rooms which need constant heat in the chilly season . Large LED display and each function with clear button, which makes your operation easily.
- 【Silent Warmth & Easy Operation】Unique design maximize heat flow into the room without fan noise and other annoying sound , with 24 programmable timer and remote control( battery included) , you can adjust any heating mode without leaving your cozy sofa/bed.
- 【Patented Technology】Unique safe technology of tail fin separation for overheat protection. Far above the international safety standards. Auto-shut-off safety includes tip-over protection. Anti-freeze setting to help prevent freezing pipes , this oil filled radiant heater is safe for the family with children and pets.
- 【Lower Your Heating Bills】With digital thermostat, you could set a temperature in a 1°F interval range from 40-95°F. Also ECO setting can adjust the room temperature and heat settings automatically to optimize energy consumption, which could save your energy cost this winter.
- 【WORRY – FREE WARRANTY】We take pride in the quality and after-sale service of our oil space heater. Any question, contact with us via the Amazon mailbox or our after-sale center, you will get solution in 24 hours.
TredNot 6 Aluminum Heat Reclaim Radiators for six inch Dia. Wood Stove Pipe. Flue Stack Exchanger
- Set of six aluminum Heat Extractors for standard 6 inch diameter stove pipe. (Approximately 19 inch circumference)
- Wrap-around and latch…Install in less than 5 minutes. No need to remove the pipe.
- Reclaim wasted heat going out the stack
- Stove Pipe heat exchangers release free heat into your room
- Made in the USA
Set of six , 6 inch diameter ALUMINUM stovepipe heat reclaimer / radiator rings that reclaim heat from the hot stove pipe and radiate the heat into the room. They make close contact with your stack / pipe to draw more heat out of the pipe. They increase the area of heat dissipation. Heat is conducted into the radiator loops where the heat is transferred into the air. They are widely used as stovepipe heat exchangers that reclaim heat from the hot stove pipe and radiate the heat into the room. You get one lot of 6 radiators. They are made of 28 gauge high thermal conductivity aluminum, 1 ½ inches wide. They attach quickly and easily to your pipe or exhaust stack. No screws or tools needed. The ends lock into each other. It takes about 2 minutes to attach all six radiators. The bands conduct heat from the points of contact on the pipe to the loops in the band where the heat is released. They will last a lifetime. They never need maintenance. They are guaranteed to draw more heat from the pipe. You may put on as many bands as you have room for. One set of six bands covers 9 linear inches of exposed pipe. ***PLEASE*** measure your circumference with a flexible tape or string. (Circumference divided by 3.14 = diameter.) See other listings for more sizes. (3, 3.6, 4, 5, 6, 7, and 8 inches. Just click on “TredNot” above.) Available in steel and aluminum. This listing is for aluminum material. NOTE: The length of pipe in the picture is not part of the sale.
FABTEK CLR-1 Fin Clamp Hydronic Baseboard Element Additional Fins, 1′ Section For 3/4" Copper
- The 2-1/8″ Fin Will Produce 591 Btu’S Per Linear Foot Of Active Element 2-1/8″ Fin Fits 3/4″ Copper Pipe
- More Durable Than Original Fins, Made With Heavier Gauge Metal
- 1 Foot Section Can Be Sized To Fit Your Needs, Eliminates Cold Spots
- Country Of Origin: United States
Fin clamp baseboard element is a multi fin hinged hydronic heating element that is attached to existing hot water or steam pipes. It can easily be removed and relocated without cutting the pipe. It goes around the pipe and is held in place with a custom clamp. Assembled unit installs in seconds. Replace missing fins and increase boiler efficiency.
FABTEK CLR-2 Fin Clamp, Chrome
- 2 foot section can be sized to fit your needs, eliminates cold spots
- More durable than original fins, made with heavier gauge metal
- He 2-1/8″ fin will produce 591 btu’s per linear foot of active element 2-1/8″ fin fits 3/4″ copper pipe
- Country of Origin: United States
Fin clamp baseboard element is a multi fin hinged hydronic heating element that is attached to existing hot water or steam pipes. It can easily be removed and relocated without cutting the pipe. It goes around the pipe and is held in place with a custom clamp. Assembled unit installs in seconds. Replace missing fins and increase boiler efficiency.
Wrap-On Pipe Heating Cable – 13-Feet, 120 Volt, Built-in Thermostat, Low Wattage – 31013
- Built-in thermostat – turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F – simply wrap on, insulate and plug in. Insulation sold Separately.
- Press-to-test button – exclusive feature to test cable before or after installation.
- Energy efficient – uses up to 65% less energy at 2 watts per foot vs Other cables at 7 watts per foot.
- Use on all Rigid pipes – PVC, CPVC, Copper and metal pipes.
- Made in the USA
Prevents frozen water pipes to –50F. Simply wrap on, insulate and plug in. Engineered for use on metal and rigid plastic pipes. Uses an exclusive Press-To-Test button so you can test the cable before installing. A built-in thermostat turns the cable on at 38F. Proven low-wattage design uses up to 65 percent less energy at 2 watts a foot vs. other cables at 7 watts a foot, and protects to –50F. An exclusive power sensor light glows when the thermostat is closed. Each package contains one ready-to-install pipe heating cable along with installation instructions. To install, you will also need PVC/electrical tape, fiberglass pipe insulation, a tape measure and eye protection. Warning: This cable has been designed for the sole purpose of preventing metal and rigid plastic water filled lines from freezing. DO NOT use this product on fuel lines, drain lines, hoses or buried pipes. Fiberglass pipe wrap is required to complete the installation. Read and follow all instructions. Cables are available in various lengths. See chart to determine the length required for your application.
6 Aluminum Stovepipe heat Reclaimer/Radiator/Bands, 5 inch Dia
Fin Clamp Hydronic Baseboard Element 1.0CF X 2Foot
Fin Clamp Baseboard Element is a multi fin HINGED hydronic heating element that is attached to existing hot water or steam pipes. It can easily be removed and relocated without cutting the pipe. It goes around the pipe and is held in place with a custom clamp. Installs in seconds. Replace missing fins and increase boiler efficiency.
VentSaver HD Stove Chimney Pipe Protect Metal Roof
- Snow Splitter Device for Metal Roofs Protects Vent Pipes, Masts and Chimneys on sloped metal building roofs!
- Roof Cricket Eliminator for Metal Buildings! Does NOT include a Chimney, Vent Pipe or Metal Roof.
- The VentSaver HD will fit any roof pitch and an infinite array of pipe sizes from 1″ to 14″ around.
- Also provided are stainless steel nuts, bolts and heavy duty 2″ lag screws for attaching base to 1 1/2″ of structural wood.
- The VentSaver cuts and splits the snow and ice like a shark fin through water! Does NOT include a Boot, Chimney, Pipe or Metal Roof.
This ingenious snow diverter product adds support and strength to your vent pipes, chimneys or a mast while the innovative fin design cuts through and assists in the shedding of snow and ice from your roof. The VentSaver HD Series is made from non-corrosive powder-coated aluminum and stainless steel aircraft cable. Also provided are stainless steel nuts, bolts and heavy duty 2″ lag screws to fasten base into 1 1/2″ of structural support. The HD series will fit any roof pitch and an infinite array of sizes from 1″ to 14″ around. It’s 14″ standing profile is designed to protect taller vent pipe stacks such as chimneys, gas vents, plumbing vents and masts. This listing is the pipe protector only and does NOT include the Chimney, Pipe or Metal Roof. The beauty of the HD series is the variety of applications it will fit as well as the ease of installation. This auction is for the VentSaver Stack Pipe & Chimney protector fin assembly only and does not include the actual stove pipe, chimney cap, metal roof panel or pipe boot in the picture.
Conclusion
By our suggestions above, we hope that you can found heating pipe with fins for you.Please don’t forget to share your experience by comment in this post. Thank you!
