Best Pc Liquid Cooling Coolant

As with all of PrimoChill’s high performance cooling system fluids and additives, Liquid Utopia is safe, non toxic, and biodegradable. Liquid Utopia is the only single use additive available in today’s market that provides a broad spectrum of coverage and has the ability to be dyed to your color choice by adding a PrimoChill Intensifier(sold separately). No matter which of the twelve colors you choose, PrimoChill’s Liquid Utopia makes life easy for you, and short for Algae and Corrosion.

********DO NOT MIX WITH THE PRE MIXED PC ICE OR PC PURE********
Warnings/Cautions: * Liquid Utopia is made with earth friendly ingredients and carries a broad spectrum of anti-microbial agents. If you notice white sediment in your loop, it is most likely Liquid Utopia has been hard at work! White sediment may be present for some time, depending on the amount of existing contaminants. Do not mix with any pre-mixed coolants as it will over saturate the inhibitors, this includes Silver Coils as they act as a antimicrobial component.
Tyler Direct is not responsible for any hardware damage. Use at your own risk.

PrimoChill takes pride in providing solutions, and PC Ice is the solution to your water cooling fluid dilemma. This revolutionary cooling formulation takes a giant step in the world of water cooling-leaving the competition in a puddle of their own sweat. PC Ice is intended for the casual user looking to get into water cooling without worrying about their system springing a detrimental leak*. Its clean, low viscosity and low chemical makeup creates an excellent coolant for your PC. If you are looking for an affordable and efficient solution as well as a peace of mind, the ONLY solution is PC Ice. The name hasn’t changed, the performance is still top notch, the cost is still outstanding, leaving PC Ice ounce for ounce STILL your best choice.
WARNING: Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the fluid warranty. PrimoChill will not support or replace fluids used with an aluminum radiator.

USAGE NOTES: *Low-Conductivity: As with all Non-Conductive fluids, PC ICE can become conductive if it comes in contact with excessive dust or other fluids that may be conductive. The Non-Conductive aspect of PC Ice is used as a safety measure only. It is always a good idea to keep your system clean and free of dust, especially in a water cooled system. PrimoChill is not responsible for any hardware damage. Use at your own risk.

**DO NOT MIX: PC Ice includes an Anti-Microbial agent, we do not recommend mixing any other anti-algae or anti-microbial agents with the PC Ice fluid, this includes Liquid Utopia. Adding additional agents will cause a chemical reaction with the agent currently in the fluid. It is not dangerous, it will just cause the fluid not to operate at maximum levels and may cause unwanted build up. Packaging Notes: Amazon requires that all bottles have taped lids for shipping.

The PrimoChill Liquid Filling Bottle is a great tool for adding and removing fluid from your system. Filling the bottle with your desired coolant and then squeezing the bottle will allow you to control the amount of added coolant easily. This is a perfect technique for topping your system off. You can also remove the internal straw to use this for removing fluid. Squeezing the bottle will remove some air and act as a vacuum. This can be especially handy when trying to remove fluid pools from tight spaces.

Specifications

Included Parts

Warnings:PrimoChill is not responsible for any hardware damage. Use at your own risk.

The Pacific M240 D5 Hard Tube Water Cooling Kit is an efficient, yet quality liquid cooling solution for all water-cooled gaming systems. Inside you will find a W3 CPU water block, PR15-D5 pump/reservoir combo, R240 radiator, C1000 Pure Clear coolant, 3 Ring 12 RGB fans, 8 C-Pro compression fittings, 2 adapter fittings, 4 PETG hard tubes and other accessories. 2 year warranty.

 P/N: CL-W216-CU00SW-A

Dimension: 518(L) x 198 (W) x 223 (H)

Compatibility: Intel LGA 2066/2011/1366/1156/1155/1151/1150/775

AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2(CPU Socket)

Components Dimension         

Pump & Reservoir:228.1H) x 87.4(W) x 94.2(L) mm

Radiator : 39.9 (H) x 120.7 (W) x 273 (L)

Tube Dimension: OD : 16mm , ID : 12mm , L : 500mm

Fan Spec: 1500 RPM (1000RPM with LNC)

Coolant: Pure Clear Coolant

Kit Contents   

CPU Water Block

– Pacific W3 CPU Water Block x1

Pump/Reservoir

– Pacific PR15-D5 Pump/Reservoir Combo x1

Radiator

– Pacific R240 Radiator 39.9 (H) x 120.7 (W) x 273 (L) mm x1

Fittings

– Pacific C-Pro G1/4 PETG 16mm OD Compression – Chrome x6

– Pacific G1/4 90 Degree Adapter – Chrome x2

Fan

– Riing 12 LED RGB 3 Pack x1

Coolant

– Thermaltake C1000 Pure Clear Coolant x1

Tube

– V-Tubler PETG Tube 16mm OD 500mm 4Pack x1

Accessory

– Silicone Insert 900mm Tt Premium Edition

– Intel and AMD Universal Backplated & Mounting Kit

– 24pin ATX Bridge Tool x1

– Thermaltake Thermal Grease x1

Description:

– Model:SC-300T
– Flow:max 300L/h
– Head:max 1.9 meters
– Power Connector: Small 3P connector
– Voltage:DC12V
– Power: 4W
– Water tank capacity: 150ml
– Noise:23DB
– Dimensions:Length 66mm * wide 56mm * height 86mm (net size, excluding out of faucets, shock absorber)
– Tap Diameter:9.4 mm

Features:

– LED power indicator to indicate power-on state
– Control circuit,the pump is more stable
– Tap out the instructions marked
– Small 3P power connector can be directly plugged into the headboard fan original position
– Support speed testing function
– With rubber shock absorber base,ultra-quiet experience.（Tips:It is good to use the pipe with 8MM inner diameter）

Package included:

– 1pcs ultra-quiet Water pump

The LEPA Exllusion 240 is a closed-loop water cooler, great for power users and overclockers seeking quiet and high performance liquid cooling for their extreme systems. Equipped with copper base with CDP (Central Diffusing Passage) cold plate, 240mm aluminum radiator, two 120mm Dual-Convex-Blades fans, this model delivers up to 400W+ TDP cooling capacity to handle the extremely overclocked processor. Great for DIY professionals, this semi-DIY water cooling solution features coolant refillable design, and included red, blue, green dyes allow users to customize the preferred coolant color. Thus users can customize the tone of their coolant to their wildest imagination.

Specifications:
Monitoring Range: -50 ~110 degrees
Voltage: 5V – 24V
Interface: Big 4P
Screw Thread: G1/4
Upper Panel Size: Approx. 4 * 8cm
Flat Plate Size: 4 cm * 8 cm
Applicable Pipe: 9mm Outer Diameter
Thermometer Panel Size: Approx. 47.8 * 28.2mm
Package Size: Approx. 12 * 9 * 3cm
Weight: 98g
 
Package List:
1 * Water Flow Meter
1 * Thermometer
2 * Connectors
2 * Clamps
 
Note:
●Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.
●Product’s size made for manual measurement,  1-2CM error belongs to the normal range.

Conclusion

By our suggestions above, we hope that you can found pc liquid cooling coolant for you.Please don’t forget to share your experience by comment in this post. Thank you!