Which Is The Best Polyethylene Ice Maker Line

The iSpring fridge connection kit connects your reverse osmosis system or other water filters to your fridge. It can be used to supply your refrigerator’s ice maker or water dispenser, your coffee maker, etc. The kit comes with a 1/4″ x 1/4″ x 1/4″ “T” valve to branch off from the RO system, 20 feet of 1/4″ tubing, a 1/4″ x 1/4″ ball valve to shut off the flow when needed, and a compression connection set for connecting to the output location. The fridge connection kit will work with any RO system or filtration system that uses standard 1/4″ tubing. Why iSpring? Located in Alpharetta, Georgia for over a decade, iSpring Water Systems LLC is a family owned company specializing in reverse osmosis water filtration systems. Our products include residential and commercial reverse osmosis (RO) systems, whole house water systems, ultrafiltration systems, shower, faucet, and counter top filters, filter cartridges and housings, RO coolers, and kitchen faucets and fittings. Our aim is to make high quality drinking water accessible for all households. With affordable pricing, solid quality, prompt delivery, and top notch customer service, we hope to assist in bringing you great water for years to come.

User’s Guide
1. Except air and water,don’t attempt to use the fittings on other fluids
2. The tube fitting is prohibited where spark and fire might be occurred
3. The tube fitting is prohibited if water temperature is above 60’C
4. Never apply tube joint with additional external load(bending,twist or
pulling),otherwise damage or leakage will be occurred.
Caution
Check the end of tubing for a right angle cutting and check the external surface of
tubing for any damage or scratch.Please refer to following instruction in connection
of tubing.When you insert the air tubing into the joint,you will have two-step
feeling.Section one is locking claw and section two is sealing ring.Must insert tube
into section two.
Sleeve is used in tubing connection and disconnection.The sleeve is designed as an
oval shape,which is covienient in assembly and disassembly.However,round sleeve is
available to met any special demand the product has limited space for oval
sleeve.After connection of tube joint and tubing,always try to pull tubing and ensure
its firm connection.
Always use proper tool to tighten external hexagonal and internal hexagonal parts of
the tube fitting.Always apply recommended torque on screws otherwise extra torque
might damage thread and cause air leakage while insufficient torque might cause
loose screws and air leakage.
After Screws are tightened,you may adjust the direction of tubing with most of our
tube joint.If it is hard in adjustment,you may apply recommended torque to turn
screw to adjust direction of tubing.

Product description

Highlights: For installation of humidifiers iice makers and evaporative coolers Include 1/4 x 25 poly tubing, and self piercing saddle valve 1 Kit/Polybag.

From the Manufacturer

LDR 509 5100 Ice Maker/Humidifier Installation Kit , 1/4-Inch X 25-Foot, Poly Tubing. 1/4-Inch X 25-Foot Ice Maker/Humidifier Installation Kit With Poly Tubing includes tubing, self-piercing saddle valve and fitting. Install ice maker or humidifier without turning water off.

Product Description

Eastman’s Polyethylene Tubing Icemaker Kit is built to last. The 25′ polyethylene tube can be cut to length and its hard, flexible surface will keep it from kinking. All necessary hardware is included with this kit, making it easy and fast to install.

From the Manufacturer

Eastman’s Polyethylene Tubing Icemaker Kit is built to last. The 25′ polyethylene tube can be cut to length and its hard, flexible surface will keep it from kinking. All necessary hardware is included with this kit, making it easy and fast to install.

Product Description

This Watts icemaker kit comes with 25-Feet of polyethylene tubing and a self-tapping saddle valve. It is durable and long lasting. This kit is easy to install for the contractor or homeowner. Kit includes self-piercing saddle valve.

From the Manufacturer

This Watts icemaker kit comes with 25-Feet of polyethylene tubing and a self-tapping saddle valve. It is durable and long lasting. This kit is easy to install for the contractor or homeowner. Kit includes self-piercing saddle valve.

What is it?

PureSec 2017 20WP1/4TU-BLUE NSF Certified CCK Blue PE Tubing/Hoses is designed for use with all push connect fittings. It offers excellent pressure and temperature ratings and has outstanding resistance to environmental stress cracking, The tubing is made of 100% BPA Free thermoplastic material (Polypropylene).The products were put through rigorous structural and material testing to help ensure they meet the standards for drinking water, Our tubing is designed for standard residential use up to 120 PSI recommended. The temperature should not exceed 150°F.

Where to use it ?

Applications include RODI or ATO system water purifier refrigerator ice maker coffee maker etc

How to use it ?

Just connect with the push fit connectors and delivery the water to the applications you need .Be sure you cut the tubing even and straight, without crimping it. Then insert straight, and all the way into the connector. If it’s crooked, or not inserted all the way, or crimped, it may leak

What’s in the package?

PureSec 2017 20WP1/4TU-BLUE NSF Certified CCK Blue PE Tubing/Hoses

The Eastman Ice Maker Installation Kit includes everything you need to connect the water supply to your ice maker. The kit includes a 15 foot roll of PEX tubing that can be cut to length for a perfect fit. The kit also includes an adapter and an add-an-outlet adapter valve for quick installation.

Conclusion

By our suggestions above, we hope that you can found polyethylene ice maker line for you.Please don’t forget to share your experience by comment in this post. Thank you!