Which Is The Best Powder Coating Equipment Oven

Bench Top Powder Coating Oven

This is a 30A control panel for powder coating oven. The PID controller has built-in timer function, one can use it to hold oven temperature at a certain amount of time and then shut off element power; press the blue push buttom momentarily, it will reset the timer and start another curing batch. During the heating process , one can use a manual switch to turn ON or OFF the element power if needed. The alarm buzzer can be used as either temp alarm or finishing alarm; when it goes off, it can also be muted.

Features:
Illuminated 22mm switches for intuitive of operation.
Flashing buzzer and illuminated alarm mute switch.
Mini 2-in-1 Volt and Amp meter for showing system power.
Solid State Relay for precise temperature control.
Contactor for completely cut off power to the element.
Oven temperature probe w/ mounting screw (both sensor and cable are rated for 900 º F).
1/2-inch EMT conduit fitting for element connection.
Strain Relief Power Cord Connector for hard-wiring the power line.

Note:
The system is designed for North America 240V AC power line that requires four line power connections (L1, L2, Neutral and Ground).
Input power cord is not included because each user may have different hook up requirements.
Heating element is not included.
Warranty: One (1) year for parts and labor.
Lead time is about 2 business days.

For a KIT of components to DIY this panel, please check here: https://amzn.to/34BUgmA

Support line: 770-569-8420. 9-5 ET, M-F

All items sold on Amazon cannot be price-matched with auberins.com

Free US shipping for limited time only!

This is our second generation kit to DIY a control system for powder coating oven (approx. 4’x4’x6′ size). The circuit is designed for a 240 V dual output system with a total oven draw no more than 50 Amps. It not only has an additional timer readout, but also independent control for dual heater output. Wiring diagram and punching specification are available after purchase.

This kit includes each of the following:
12x10x8″ Wall mount enclosure with complete precut, and heat sink.
PID controller w/ connection to the timer.
Two 40 A Solid State Relay.
General purpose timer.
Flashing Buzzer for temperature/timer alarm.
Yellow LED for showing heater status.
Black selector switches for timer alarm silence.
Black selector switch for temperature alarm silence.
Two yellow illuminated selector switches for element control.
Blue illuminated selector switch for reseting timer.
Oven temperature probe w/ mounting screw (both sensor and cable are rated for 900 º F).
Two 1/2-inch EMT conduit fitting for element connection.
Strain Relief Power Cord Connector for hard-wiring input power.
Breaker Switch for main power control.
DIN Rail Terminal Block Kit for power distribution.
Engraved Panel Tags for labeling.

The kit does not include:
Heating element.
Input power cord.
Wiring and wiring fittings.

Note:
1. The enclosure only has two 1/16 DIN precut on the front panel.
2. If you need light & fan control, please check amzn.com/B073X1CCY1
3. The kit is designed for N.America 240V power line that requires 4-line power(L1, L2, Neutral and GND). For the customers in other countries, please contact us: https://goo.gl/fbnRDL

Warranty: 6 months.

All items sold on Amazon cannot be price-matched with auberins.com

Free US shipping for limited time only!

Assembled panel is also available: amzn.com/B07KCNLN22

This is our latest kit to DIY a control system for powder coating oven (approx. 4’x4’x6′ size). The circuit is designed for a 240 V oven with up to 12,000 watt heater load (for example, 4 x 3000 Watt heating elements) and 120V Fan/Light. It not only has an additional timer readout, but also independent control for dual heater output. Wiring diagram and punching specification are available after purchase.

This kit includes each of the following:
12x10x8″ Wall mount enclosure with silk screen label, complete precut and heat sink.
PID controller w/ connection to the timer.
Two 40 A Solid State Relay.
General purpose timer.
Flashing Buzzer and alarm indicator.
Yellow LED for showing heater status.
3-Position black selector switch for timer alarm silence.
3-Position black selector switch for temperature alarm silence.
Two yellow illuminated selector switches for element control.
Blue illuminated selector switch for reseting timer.
Green illuminated selector switch for light and fan control.
Oven temperature probe w/ mounting screw (both sensor and cable are rated for 900 º F).
1/2-inch EMT conduit fitting for all output connection.
Strain Relief Power Cord Connector for hard-wiring input power.
Breaker Switch for main power control.
DIN Rail Terminal Block Kit for power distribution.
The kit does not include:
Heating element.
Input power cord.
Wiring and wiring fittings.

Note:
1. This kit includes an enclosure with complete precuts.
2. The kit is designed for N.America 240V AC power line that requires four line power connections (L1, L2, Neutral and Ground). For the customers in other countries, please contact us: https://goo.gl/fbnRDL

Warranty: 6 months.

All items sold on Amazon cannot be price-matched with auberins.com

Conclusion

By our suggestions above, we hope that you can found powder coating equipment oven for you.Please don’t forget to share your experience by comment in this post. Thank you!