owneaster 
Nowadays, there are so many products of raspberry pi power and cooling hat in the market and you are wondering to choose a best one. You have searched for raspberry pi power and cooling hat in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings raspberry pi power and cooling hat which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
LoveRPi Power-Over-Ethernet (PoE) HAT for Raspberry Pi 4 Model B and Raspberry Pi 3 Model B+ (Compact, Non-Isolated)
- ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 4: Deliver clean and reliable power to the latest Pi 4! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 4 Model B sold separately.
- STANDARDS COMPLIANT POWER OVER ETHERNET SWITCH REQUIRED: The network switch or power sourcing equipment (PSE) must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. “Passive PoE” (DC 24V or 48V) is not standards compliant and may cause damage to equipment.
- BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 4 Model B boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market.
- VENTILATED CASE WITH COOLING FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B must be adequate to ensure performance and stable operation.
- BACKWARDS COMPATIBLE: Supports the latest Raspberry Pi 4 as well as the Raspberry Pi 3 Model B+.
- Input: IEEE 802.3af Compliant PoE
- Output: 5V +-5% up to 2.5A*
- Protection Circuitry: Transient Overvoltage, Undervoltage Lockout, Thermal Shutdown, Foldback Current Limiting
- * Active airflow and adequate cooling required for stable continuous operation at high load.
Install PoE HAT onto the 40-pin GPIO header. Attach black wire from fan to GND pin on PoE HAT. Attach red wire from fan to 5V (performance) or 3.3V (quiet) pin on PoE HAT. Insert MicroSD card with properly flashed OS. Attach Ethernet cable from a 802.3af PoE switch.
Argon Fan HAT for Raspberry Pi 4, Raspberry Pi 3B, and Raspberry Pi 3 B+ | Includes 40mm Fan and Power Button | Provides Safe Shutdown, Forced Shutdown, and Rebooting
- A fan HAT that uses a 40mm cooling fan to prevent overheating on the Raspberry Pi 3 and Raspberry Pi 4.
- Comes with a power button that can be used to do forced shutdowns, safe shutdowns, and reboots to the Pi.
- Only needs a one-line script for full functionality. Even guves an easy-to-use fan controller allowing users to decide when the HAT should adjust the fan speed.
- Can change fan speed based on CPU temperature.
- Provides enough space for a heat sink to be used on the chips of the Raspberry Pi board.
The Argon Fan HAT is a simple Raspberry Pi HAT that cools the Pi and gives it a safe shutdown button. With just a one-line script, you’ll have full functionality for the HAT, allowing you to do additional features such as rebooting the pi, and adjusting the fan speed of the single board computer. You can even program when the fan adjusts its speed, giving you full control over the HAT. Get ready to use this in any Raspberry Pi Case that offers HAT support, such as the Argon POLY+ or the Argon NEO. The best part is that this will work for the Raspberry Pi 4 Model B, the Raspberry Pi 3 Model B, and the Raspberry Pi 3 B+.
Raspberry Pi 4 Model B 2019 Quad Core 64 Bit WiFi Bluetooth (4GB)
- Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1. 5GHz—4GB LPDDR4-2400 SDRAM
- 2. 4 GHz and 5. 0 GHz IEEE 802. 11B/g/n/ac Wireless LAN, Bluetooth 5. 0, double-true Gigabit Ethernet
- 2 × USB 3. 0 ports, 2 x USB 2. 0 Ports—2 × micro HDMI ports supporting up to 4Kp60 video resolution
- 2-lane MIPI DSI/CSI ports for camera and display–4-pole stereo audio and composite video port–Micro SD card slot for loading operating system and data storage
- Requires 5. 1V, 3a power via USB Type C or gpio-poep (power over Ethernet) enabled (requires PoE hat-not included)
Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems. This product’s key features include a high-performance 64-bit quad-core processor, dual-display support at resolutions up to 4K via a pair of micro-HDMI ports, hardware video decode at up to 4Kp60, 4GB of RAM, dual-band 2. 4/5. 0 GHz wireless LAN, Bluetooth 5. 0, Gigabit Ethernet, USB 3. 0, and PoE capability (via a separate PoE HAT add-on). The dual-band wireless LAN and Bluetooth have modular compliance certification, allowing the board to be designed into end products with significantly reduced compliance testing, improving both cost and time to market.
iUniker Raspberry Pi 4 Case, Raspberry Pi 4 Fan ABS Case with Cooling Fan, Raspberry Pi 4 Heatsink, Simple Removable Top Cover for Pi 4 Model B/ 4B (Black with Large Fan)
- Unique Removable Top Cover Design, you can get in touch with the GPIO or Camera Connector Very Simple
- With 40mm Quiet Cooling Fan, it can drop the temps for your Pi
- Include Raspberry Pi 4 Heatsink, Better Cooling Experience
- Awesome Looking, it can make your Pi looks Cooler than others
- NOTICE: Updated version can compatible with Pi 4 Model B
Dorhea Raspberry Pi 4 B Case, Raspberry Pi Rack Cluster Case Stacking Case with Cooling Fan and Fan Cover for Raspberry Pi 4,Raspberry Pi 3 Model B B+, Raspberry Pi 2 Model B,Pi B+ (5-Layers)
- This is a new cluster case,it has 5-layer of transparent acrylic case,easy to assemble and perfect fit with your Raspberry Pi.
- Raspberry pi case is open on all sides with each acrylic layer containing built in air vent and fan to allow for maximum air flow for each Raspberry Pi
- Access to all GPIO port ,semi-enclosed cases can easy to increase everything you want to get it in. Allow the USB ports, flex cable, camera module and so on
- Compatible with Raspberry Pi 1 model A/B/A+/B+, Pi 2 model B, Pi 3 model B/B+, Pi 4 B, Pi zero/zero w
- This acrylic case is a DIY stacking case, you can assemble it to the one layers/ two layers/ three layers/ four layers/ five layers you need, adding more joy for your Raspberry Pi
5-layer of transparent acrylic case, easy to assemble and perfect fit with your Raspberry Pi.
It is easily to access to the board,the power,RCA Video,the Audio,USB,SD card and light pipes and so on.
5-layer Protective cover with cooling Fans provides the best protection for your raspberry pi.
It’s perfect for program learning and observe the data at the same time. Great way to get a lot of Pi’s working together.
This is a stacking case. It can divide to 1,2, 3, 4 ,5 cases. It’s really multifunctional.
Packing List:
1 X 5-layer Acrylic Shell (4 pieces of panels)
5 X Mini Fans (with install screws pack)
5 X Metal fan protection cover
1 X Install screws pack
Note:
Raspberry pi motherboard is not included.
Please remove the protective film before using it.
UCTRONICS PoE HAT for Raspberry Pi 4 with Case, 802.3at Power Over Ethernet Expansion Board for Pi 4 B Board, with Cooling Fan
- Perfect for Pi 4: This PoE HAT can be used with Raspberry Pi 3 model B+ and Raspberry Pi 4 model B (not included)
- This Acrylic clear case is designed for Pi 4 Board. NOTE: Pi 4 board is not included.
- Higher Output Power: DC 5V (3A Max) / 12V (2A Max) via on-board terminal block
- Total Power Budget: 25W
- Over-temperature Protection: The 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high.
- Well-ventilated Case: Cut-outs for every port of Pi 4 board and PoE hat, easy to access to all ports as well as supplying well-ventilated environment.
- NOTE: PSE (Power Supply Equipment) is needed to supply PoE signal to the Raspberry Pi, such as a PoE switch or injector.
Waveshare Raspberry Pi Power Over Ethernet HAT for Raspberry Pi 3B+ and 802.3af PoE Network
- The Raspberry Pi Power over Ethernet HAT is a small accessory for the Raspberry Pi computer. It can only be used with the Raspberry Pi 3 Model B+
- The PoE HAT allows you to power your Raspberry Pi using Power over Ethernet–enabled networks
- for this product to be used, the network it is connected to needs to have power-sourcing equipment installed.
- 802.3af PoE, 37–57V DC, Class 2 device, 5V/2.5A DC output
- Fully isolated switched-mode power supply
- 25mm x 25mm brushless fan for processor cooling, Fan control
Waveshare Power Over Ethernet HAT for Raspberry Pi 4 Model B/Raspberry Pi 3 Model B+ Support 802.3af PoE Network Standard, with 25mm x 25mm Brushless Cooling Fan Isolated Switched-Mode Power Supply
- The Raspberry Pi Power over Ethernet HAT is a small accessory for the Raspberry Pi computer.
- The PoE HAT allows you to power your Raspberry Pi using Power over Ethernet–enabled networks
- for this product to be used, the network it is connected to needs to have power-sourcing equipment installed.
- Support 802.3af PoE Network Standard, Fully isolated switched-mode power supply,37–57V DC.
- Class 2 device,25mm x 25mm brushless fan for processor cooling.Fan control.
- It can be used with Raspberry Pi 3B+/Raspberry Pi 4 Model B.
Overview
The Raspberry Pi Power over Ethernet HAT is a small accessory for the Raspberry Pi computer. It can be used with Raspberry Pi 3B+/Raspberry Pi 4 Model B.
The PoE HAT allows you to power your Raspberry Pi using Power over Ethernet–enabled networks; for this product to be used, the network it is connected to needs to have power-sourcing equipment installed.
Specifications
- 802.3af PoE
- Fully isolated switched-mode power supply
- 37–57V DC, Class 2 device
- 5V/2.5A DC output
- 25mm x 25mm brushless fan for processor cooling
- Fan control
- Shall only be powered using 802.3af-compliant power sourcing equipment; any external power supply used with the Raspberry Pi shall comply with relevant regulations and standards applicable in the country of intended use
- Should be operated in a well-ventilated environment, and should not be covered
- Should be placed on a stable, flat, non-conductive surface while in use, and should not be contacted by conductive items
- Do not block or obstruct the fan; Do not insert anything into the fan at any time
- Do not expose the product to water or moisture; Do not expose it to heat from any source; the product is designed for reliable operation at normal room temperatures
- Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors
Safety
Package Content
Raspberry Pi PoE HAT x1
RPi screws pack (4pcs) x1
Geekworm Raspberry Pi 4B/3B+/3B X735 Power Management with Safe Shutdown Auto Cooling Expansion Board Compatible with Raspberry Pi 4 Model B
- Raspberry Pi 4 Model B/3B+/3B X735 safe shutdown board for intelligent power management and safe shutdown
- Dual trip point temperature controlled cooling fan , AutoControl the fan for Cooling / quiet Operation
- Power supply: 5.1Vdc +/-5%，2.5~4A
- X735 support four kind off power supply: DC5525 port: Can provide up to 4A power supply capability
- Type-C power port for Raspberry pi 4
- Micro USB: Compatible with your original mirco usb power adapter
- XH2.54 2Pin Cable: This is a flexible power supply. Note: require high quality power supply, strongly recommend to use ASIN: B07413Q5Y4 .
- Fully compatible with Raspberry Pi X825(ASIN:B07VXF2HJG), X855(ASIN:B07VXFGFLX), X820(ASIN :B073CGQD9C), X850(ASIN :B073CHHFMP), X860(ASIN :B07R9RRHCZ), X870(ASIN :B07R6H4XXW), X822（ASIN :B07S8BXVMX）, X852 to provide intelligent and safe power management
- Reserved 40pin stackable Header for Add On Boards
- WIKI for reference: raspberrypiwiki.com/index.php/X735, for the safe shutdown script, please also refer to wiki
- Note: Full poweroff through software is not supported when using latching power switch
- Do not apply power to your Raspbeery Pi via the Pi’s Micro-USB socket
Official Raspberry Pi Power Over Ethernet (PoE) HAT for Raspberry Pi 3 B+ and 802.3af PoE Network
- This is the 2018 official Raspberry Pi Power Over Ethernet (PoE) HAT for the Raspberry Pi 3 Model B+. This is the updated version, which addresses the current limiting issue found in the original release.
- May be used to power your Raspberry Pi 3 B+ with an Ethernet cable on a PoE enabled network, eliminating the need for a separate power supply.
- 802.3af compliant PoE.
- Class 2 PoE device: 36-57v input, 5v/2.5a output.
- SMPS: Fully isolated Switched-Mode Power Supply with fan for cooling.
PoE HAT Product Summary:
This is the official Raspberry Pi Power Over Ethernet (PoE) HAT for the Raspberry Pi 3 Model B+ single board computer. This small add on accessory may be used to power your Raspberry Pi 3 B+ with an Ethernet cable on a PoE enabled network, eliminating the need for a separate power supply. An 802.3af compliant PoE injector, switch or router (not included) is required to use PoE capability.
Specifications:
- Official Raspberry Pi product
- PoE Class 2 device
- Power over Ethernet 802.3af compliant
- SMPS: Fully isolated Switched-Mode Power Supply
- Input voltage: 36 – 57v
- Output voltage: 5v
- Amps: up to 2.5a
- Includes brushless fan with fan control for cooling
- Plug-and-play installation with Raspberry Pi 3 B+ (not included)
Package Contents:
The PoE HAT package contains the following items:
- 1 PoE HAT for use with Raspberry Pi 3 B+ (and onward) SBC
- 4 Mounting screws to attach the HAT to the RPi board
- Does not include Raspberry Pi 3 Model B+
- Sourced from U.S. authorized/official distributors
Applications:
- Educational / Maker use
- IoT (Internet of Things) devices
- Communications and network devices
- Applications where PoE is available and preferable
Raspberry Pi is a trademark of the Raspberry Pi Foundation.
Conclusion
By our suggestions above, we hope that you can found raspberry pi power and cooling hat for you.Please don’t forget to share your experience by comment in this post. Thank you!
