owneaster 
Nowadays, there are so many products of water heating elements in the market and you are wondering to choose a best one. You have searched for water heating elements in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water heating elements which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Rheem SP20060 Electric Water Heater Tune-Up Kit
Product description
Rheem SP20060 Electric Water Heater Tune-Up KitRheem SP20060 Electric Water Heater Tune-Up Kit Features: Repair Kit Plumber’s Pack
From the Manufacturer
Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.
Rheem SP10869MM Screw-In 240-volt by 4500-watt Element, Premium Resistored Stainless Steel
- Element – 240V/4500W stainless steel resistored lwd – 1 in screw-in
- Watt density classification: lwd, input Voltage (V): 208, Input voltage (V): 240, wattage at 208V (W): 3380
- Element diameter (in.): .316, Element length – Flange to tip (in.): 13.44, mounting Type: threaded, ACTUAL thread size – Outside diameter.): 1-9/32
- Thread type series designation: NPSM, configuration: fold back, nominal thread size – (in.): 1, threads per inch: 11-1/2
Product Description
Rheem SP10869MM water heater 1 inch 4500W element resistored screw-in LWD 240V stainless steel
From the Manufacturer
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
Dernord 120V 1650W Foldback Water Heater Element Screw-In Lime Life Heating Element with Low Watt Density
- Low Watt Density Stainless Steel Foldback Water Heater Element
- Foldback Water Heater Element provides 1650w 120v of power
- Element is folded back to minimize length and maximize heated surfaces
- Easy to Install and fits most Water Heater Models of American
- Resists dry firing, lime deposits, and sand that would burn out ordinary elements
Product Features
1650W Foldback Water Heater Element : Replacement American standard water heater parts
From the Manufacturer
The Dernord 120v 1650w low Watt Density Screw in Foldback Water Heater Element has a compact, energy efficient design that is well suited for many applications. The element is folded back to minimize length and maximize the heated surface.It provides uniform heat distribution and offered long performance life, and fits more models of American,for Bradford White, Craftmaster, General Electric and Whirlpool heaters.Contains 1 – Element And 1 – Gasket, 12″ Minimum Tank Diameter. Fits Ace, State, Reliance, Sears, Rheem, Rudd, Montgomery Ward And Most Other Water Heaters that use a 120V screw in style replacement.
Technical Details
Item Weight: 11.45 ounces
Origin: China
Color: White
Tube length: 250mm
Tube diameter: 8mm
Item Package Quantity: 1
Mounting Type: Threaded
Kingwork UL-Listed Bucket Heater, 1000 Watts Immersion Bucket Water Heater with Thermostat and Electric Immersion Heating Element, Submersible Water Heater with Auto Shutoff
- Applications – This Kingwork heavy duty and portable bucket water heater heats water only. Use for cold weather and travel. Perfect for winter time jobs.
- Thermostat Feature – The silver-colored stainless steel tube contains a thermal overload safety switch, it can automatically cycle on and off as needed to maintain water temperature. It will not overheating and save power.
- Guard – The stainless-steel guard on the electric bucket heater protects the heating element from directly contacting persons or animals. The heater is safe for use in all pails, buckets and bathtubs, make sure the container designed to contain boiling water.
- Simple Operation – Immerse in water at proper level. Plug into any grounded wall outlet. Check power indicator light in plug to make sure unit is on. It will heat water continuously over 180 degrees F and towards boiling.
- UL-Listed to the safety standards, Package included: 1 pack bucket heater + Manual.
– The Kingwork bucket heater designed to heat water only. Use for construction industry, animal husbandry, car washing, indoor use and many other jobs in cold weather.
– Bucket Water Heater is only to be immersed up to the point of the electrical connection. Water level about 8” deep.
– The size of this electric immersion heater is perfect rested in 5 gallon bucket.
– Handle and cord cannot be submerged.
– The bucket heater is safe for use in all pails, buckets and bathtubs, will not damage plastic containers, make sure the container designed to contain boiling water.
– 1000W 120V
– UL-Listed.
Warning:
Please don’t use extension cord.
Never leave it unattended.
If the black plastic handle is too hot, please unplug it, wait until cool before using,otherwise a fire hazard will result.
Dernord 120V 1500W Foldback Water Heater Element with Low Watt Density
- Low Watt Density Stainless Steel Foldback Water Heater Element
- Foldback Water Heater Element provides 1500w 120v of power
- Element is folded back to minimize length and maximize heated surfaces
- Foldback Water Heater Element is easy to Install
- Fits most Water Heater Models of American
Product Features
1500W Foldback Water Heater Element : Replacement American standard water heater parts
From the Manufacturer
The Dernord 120v 1500w Low Watt Density Screw in Foldback Water Heater Element has a compact, energy efficient design that is well suited for many applications. The element is folded back to minimize length and maximize the heated surface.It provides uniform heat distribution and offered long performance life, and fits more models of American,for Bradford White, Craftmaster, General Electric and Whirlpool heaters.
Technical Details
Item Weight: 9.2 ounces
Origin: China
Color: Silver
Voltage: 120 volts
Item Package Quantity: 1
Mounting Type: Threaded
Screw Type:1”NPSM
Dernord 240V 5500W Immersion Ripple Foldback Brewing Water Tubular Heater Element with 1 Inch NPSM Thread White
- Low Watt Density Stainless Steel Immersion Ripple Foldback heating element
- Provides 5500w 240v of power
- The shape is to minimize length and maximize heated surfaces
- Easy to Install and fits most Water Heater Models of American
- Resists dry firing, lime deposits, and sand that would burn out ordinary elements
Product Features
5500W Element : Replacement American standard water heater parts
From the Manufacturer
Dernord 240v 5500w Immersion Ripple Foldback Brewing Water Tubular Heater Element has a compact, energy efficient design that is well suited for many applications. The type of element is to minimize length and maximize the heated surface.It provides uniform heat distribution and offered long performance life, and fits more models of American,for Bradford White, Craftmaster, General Electric and Whirlpool heaters.
Technical Details
Item Weight: 16.9ounces
Origin: China
Color: White
Tube length: 333mm
Tube diameter: 8mm
Item Package Quantity: 1
Mounting Type: Threaded
Commercial Electric Water Immersion Heating Element Brass (5000 Watt)
5000 Watt. 1 Phase. 208V Buffet table, steam table immersion heating element. Front View A =10″
Camco 02282/02283 3500W 240V Screw-In Water Heater Element – High Watt Density
Product Description
3500W/240V Screw-In Element 02283
From the Manufacturer
Camco’s 3500W 240V screw-in type high watt density water heater elements can be used in all replacement situations if the same wattage and voltage are used. High Watt Density are the most common and the same type of element provided with most water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Conclusion
By our suggestions above, we hope that you can found water heating elements for you.Please don’t forget to share your experience by comment in this post. Thank you!
